Journal of Jilin University(Earth Science Edition) ›› 2017, Vol. 47 ›› Issue (1): 197-202.doi: 10.13278/j.cnki.jjuese.201701206

Previous Articles     Next Articles

Strength Analysis of New Kinds of RC Drill Bit and Its Experimental Study

Wu Dongyu, Yin Kun, Gan Xin, Zhang Xinxin, Yin Qilei   

  1. College of Construction Engineering of Jilin University, Changchun 130026, China
  • Received:2016-05-18 Online:2017-01-26 Published:2017-01-26
  • Supported by:
    Supported byChina Geology Survey Project(12120113096900)

PDF (PC)

443

Abstract: For the problem of dust pollution and coring for diamond drilling in mine area, which can not meet the requirement of drilling core, in this paper,a drilling system named RC DTH hammer is used to instead of diamond drilling method. With a high drilling efficiency, the RC DTH hammer drilling method overcome the problems in mine area, especially for the pollution, core, and the health of workers. In order to make full use of the method, two new RC bits are designed and applying software LSDYNA to analysis the strength of the structures of two bits. The two drill bits made good performances in the field tests, however, the bit with nozzle holes in splines broke frequently during drilling. The simulation consequence showed that the stress of RC bit with nozzle holes in splines has much larger than the allowed value of fatigue limit of 35CrMo, which is the primary cause to this test failure. The conclusion of simulation is in great agreement with that of field test, proving that the ring slot should not be designed nearby the nozzle hoes when designing a RC drill bit.

Key words: hollow-through DTH hammer, strength analysis, continuous coring, RC drill bit, LSDYNA

CLC Number: 

  • P634
[1] Yin Qilei, Peng Jianming,Bo Kun,et al. Study on Dust Control Performance of a Hammer Drill Bit[J]. International Journal of Mining, Reclamation and Environment, 2013,27(6):393-406.
[2] 徐友宁,张江华,柯海玲,等.某金矿区农田土壤镉污染及其环境效应[J].中国地质,2013,40(2):636-643. Xu Youning, Zhang Jianghua, Ke Hailing, et al. Cd Contamination of Farmland Soil in a Gold Mining Area and Its Environmental Effects[J]. Geology in China,2013,40(2):636-643.
[3] Niosh. NIOSH Alert:Request for Assistance in Preve-nting Silicosis and Deaths in Rock Drillers[R]. Cincinnati:US Department of Health and Human Services, Public Health Service, CDC, Niosh, 1992.
[4] 李良忠,胡国成,张丽娟,等.矿区家庭灰尘中重金属污染及其潜在生态风险[J].中国环境科学,2015(4):1230-1238. Li Liangzhong,Hu Guocheng,Zhang Lijuan, et al. The Pollution and Potential Ecological Risk Assessment of the Heavy Metals in Household Dusts from Mineral Areas[J].China Environmental Science,2015(4):1230-1238.
[5] 任伯帜,刘斌全,郑谐,等.锰矿区土-水界面污染流中重金属来源分析[J].环境污染与防治,2014(12):6-10. Ren Bozhi, Liu Binquan, Zheng Xie, et al. Source Analysis of Heavy Metal in Contaminated Flow from Soil-Water Interfaces in Manganese or Zone[J]. Environmental Pollution & Control,2014(12):6-10.
[6] Bo K, Wang M S, Zhao Z Q. Numerical Simulation on Bottom Hole Flow Fields of Reverse Circulation Bit[J]. Applied Mechanics and Materials, 2012, 256/257/258/259:2826-2830.
[7] 王茂森.全孔反循环潜孔锤参数优化及其钻进工艺研究[D].长春:吉林大学,2007. Wang Maosen. The Parameters Optimization of the Reverse Circulation DTH Hammer and Studies on Its Drilling Technique[D]. Changchun:Jilin University, 2007.
[8] Kirk G, Muzondo T, Harney D. Improved Grade Co-ntrol Using Reverse Circulation Drilling at Mogalakwena Platinum Mine, South Africa[C]//Proceedings of 8th International Mining Geology Conference 2011. Parkville:Australasian Institute of Mining and Metallurgy, 2011:329-340.
[9] 殷其雷,殷琨,柳鹤,等.潜孔锤反循环钻进技术在某水电站的试验应用[J].吉林大学学报(地球科学版),2014,44(3):961-968. Yin Qilei, Yin Kun, Liu He, et al. Application Test of DTH Hammer Reverse Circulation Drilling Technique in a Hydropower Station[J]. Journal of Jilin University (Earth Science Edition), 2014, 44(3):961-968.
[10] 殷琨,王茂森,彭枧明,等.冲击回转钻进[M].北京:地质出版社:2010:44-63. Yin Kun,Wang Maosen, Peng Jianming, et al. Percussion and Rotary Drilling[M]. Beijing:Geological Publishing House,2010:44-63.
[11] 刘建林.气体钻井用贯通式潜孔锤关键技术研究[D].长春:吉林大学,2009. Liu Jianlin. Researches on the Key Technologies of Hollow-Through DTH Used in Gas Drilling[D]. Changchun:Jilin University,2009.
[12] 张祖培,殷琨,蒋荣庆,等. 岩土钻掘工程新技术[M].北京:地质出版社,2007:20-50. Zhang Zupei, Yin Kun, Jiang Rongqing, et al. The New Technology of Rock and Soil Drilling[M]. Beijing:Geological Publishing House, 2007:20-50.
[13] Bu Changgen, Qu Yegao, Cheng Zhiqiang, et al. Nu-merical Simulation of Impact on Pneumatic DTH Hammer Percussive Drilling[J].Journal of Earth Science,2009,20(5):868-878.
[14] Liu B, Villavicencio R, Guedes Soares C. Simplified Analytical Method to Evaluate Tanker Side Panels During Minor Collision Incidents[J]. International Journal of Impact Engineering, 2015, 78:20-33.
[15] 梁旭.金属材料疲劳强度影响因素的研究[D].沈阳:东北大学,2009. Liang Xu. Research on Influence Factors on Metal Fatige Strength[D]. Shenyang:Northeastern University, 2009.
[1] Yin Songyu, Zhao Dajun, Zhou Yu, Zhao Bo. Numerical Simulation and Experiment of the Damage Process of Heterogeneous Rock Under Ultrasonic Vibration [J]. Journal of Jilin University(Earth Science Edition), 2017, 47(2): 526-533.
[2] Wang Fuping, Li Peng, Li Guolin, Peng Jianming. Stress Analysis of the Piston Rod Return in High-Energy Liquid-Jet Hammer Based on Ls-Dyna [J]. Journal of Jilin University(Earth Science Edition), 2016, 46(5): 1482-1489.
[3] Gan Xin, Yin Kun, Yin Qilei, Li Peng. Analysis on the Bottomhole Flow Field and Structural Optimization of Air Reverse Circulation Drill Bit [J]. Journal of Jilin University(Earth Science Edition), 2016, 46(1): 187-194.
[4] Liu He,Zhang Hongqiang,Liu Bin. A Prediction Method for the Deformation of Deep Foundation Pit Based on the Particle Swarm Optimization Neural Network [J]. Journal of Jilin University(Earth Science Edition), 2014, 44(5): 1609-1614.
[5] Wang Chuanliu, Li Jianjun, Sun Rongjun. Development of High Matrix Drill Bit with Impregnated Diamond Block [J]. Journal of Jilin University(Earth Science Edition), 2014, 44(4): 1276-1281.
[6] HUANG Yong, ZHU Li-hong, YIN Kun, REN Hong. Grain Size Distribution Law of Cuttings in DTH Hammer Reverse Circulation Drilling [J]. J4, 2012, 42(4): 1119-1124.
[7] ZHAO Da-jun, LI Wen-hua, SUN You-hong, ZHANG Nan. Research on Engineering Geophysical Exploration MWD Drilling Rig [J]. J4, 2012, 42(1): 144-149.
[8] FAN Li-ming, YIN Kun, ZHANG Xiao-guang, WANG Chuan-liu, ZHAO Zhi-qiang, ZHAO Rui-zhi, PIAO Jin-shi. Numerical Simulation of Geometry Parameters for Optimization Design of Orifice Sealer Used in DTH Hammer Drilling [J]. J4, 2011, 41(2): 511-517.
[9] PIAO Jin-shin, YAN Kun, ZHAO Zhi-qiang, FAN Li-ming. Wear Mechanism of the Rock Drill Buttons in the DTH Hammer Drill [J]. J4, 2011, 41(1): 195-199.
[10] ZHANG Yong-guang, PENG Jian-ming, LIU He, YIN Qi-Lei, FAN Li-ming. Buffering the Backward Impact of Piston of Liquid-Jet Hammer [J]. J4, 2010, 40(6): 1415-1418.
[11] E Er-Ba, Sun You-hong. Experiments and Numerical Simulation of Defoaming for Energy Storage Tube [J]. J4, 2010, 40(5): 1145-1148.
[12] WANG Chuan-liu, SUN You-hong, GAO Ke, FAN Li-ming. Experimental Study on Bionic Nozzle of Diamond Bit [J]. J4, 2010, 40(3): 694-698.
[13] PIAO Jin-shi, YIN Kun, FAN Li-ming. Neural Network Method in the Penetration Rate Prediction of Percussive Drilling [J]. J4, 2009, 39(5): 882-886.
[14] QIN Yu-ying, CHEN Fu-hu, WANG Fu-ping. Study and Application of Synthetical Pressure-fracture Technical on Low Pressure and Tight Gas Reservoir [J]. J4, 2009, 39(3): 503-506.
[15] HE Long-fei, SUN You-hong, GAO Ke, LIU Bao-chang, XU Liang, WANG Chuan-liu. Experiments and Design of Bionic Non-smooth Spiral Bit [J]. J4, 2009, 39(2): 300-0304.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Earth Science Edition), All Rights Reserved.
Tel: +86-431-88502374；13756165364　E-mail: xuebao1956@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd