›› 2012, Vol. 42 ›› Issue (04): 997-1002.
付宏1, 吕游1, 李艳双1, 于建群2
FU Hong1, LV You1, LI Yan-shuang1, YU Jian-qun2
摘要: 由脱粒机的CAD模型建立了脱粒机的离散元法分析模型,采用颗粒聚合体方法建立了玉米穗的分析模型,采用接触和连接力学模型计算脱粒过程中的作用力,在此基础上建立了一种分析玉米脱粒过程的新方法和软件。对该新方法和软件进行了实例验证,结果证明了新方法的可行性。
中图分类号:
[1] Petkevichius S, Shpokas L, Kutzbach H D. Investigation of the maize ear threshing process[J].Biosystems Engineering, 2008, 99:532-539. [2] Miu P I, Kutzbach H D. Modeling and simulation of grain threshing and separation in threshing units-Part I[J]. Computers and Electronics in Agriculture, 2008, 60:96-104. [3] 毛欣, 衣淑娟. 轴流脱粒、分离机理及仿真研究的发展探讨[J]. 农机化研究,2007,10:202-205. Mao Xin, Yi Shu-juan. The developmental discussion of mechanism research and simulation of the axial flow threshing mechanism[J]. Journal of Agricultural Mechanization Research, 2007, 10:202-205. [4] 于建群, 付宏, 刘振宇,等. 基于CAD模型的离散元法边界建模方法:中国,200510016835.7. 2006-07-28. [5] Lin X, Ng T T. A three dimensional discrete element model using arrays of ellipsoids[J]. Geotechnique,1997,47(2):319-329. [6] 李艳双. 颗粒聚合体的三维离散元法算法研究与软件设计. 长春:吉林大学,2011. Li Yan-shuang. Research of algorithm for particles agglomerate in 3D DEM and design of the software. Changchun:Jilin University,2011. [7] 吴玄辰. 基于二维离散元法的玉米脱粒过程仿真分析. 长春:吉林大学生物与农业工程学院,2011. Wu Xuan-chen. Simulation and analysis of maize threshing based on 2D DEM.Changchun:Jilin University, College of Biological and Agricultural Engineering, 2011. |
[1] | 刘富,宗宇轩,康冰,张益萌,林彩霞,赵宏伟. 基于优化纹理特征的手背静脉识别系统[J]. 吉林大学学报(工学版), 2018, 48(6): 1844-1850. |
[2] | 王利民,刘洋,孙铭会,李美慧. 基于Markov blanket的无约束型K阶贝叶斯集成分类模型[J]. 吉林大学学报(工学版), 2018, 48(6): 1851-1858. |
[3] | 金顺福,王宝帅,郝闪闪,贾晓光,霍占强. 基于备用虚拟机同步休眠的云数据中心节能策略及性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1859-1866. |
[4] | 赵东,孙明玉,朱金龙,于繁华,刘光洁,陈慧灵. 结合粒子群和单纯形的改进飞蛾优化算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1867-1872. |
[5] | 刘恩泽,吴文福. 基于机器视觉的农作物表面多特征决策融合病变判断算法[J]. 吉林大学学报(工学版), 2018, 48(6): 1873-1878. |
[6] | 王扬, 王晓梅, 陈泽仁, 于建群. 基于离散元法的玉米籽粒建模[J]. 吉林大学学报(工学版), 2018, 48(5): 1537-1547. |
[7] | 欧阳丹彤, 范琪. 子句级别语境感知的开放信息抽取方法[J]. 吉林大学学报(工学版), 2018, 48(5): 1563-1570. |
[8] | 刘富, 兰旭腾, 侯涛, 康冰, 刘云, 林彩霞. 基于优化k-mer频率的宏基因组聚类方法[J]. 吉林大学学报(工学版), 2018, 48(5): 1593-1599. |
[9] | 桂春, 黄旺星. 基于改进的标签传播算法的网络聚类方法[J]. 吉林大学学报(工学版), 2018, 48(5): 1600-1605. |
[10] | 刘元宁, 刘帅, 朱晓冬, 陈一浩, 郑少阁, 沈椿壮. 基于高斯拉普拉斯算子与自适应优化伽柏滤波的虹膜识别[J]. 吉林大学学报(工学版), 2018, 48(5): 1606-1613. |
[11] | 车翔玖, 王利, 郭晓新. 基于多尺度特征融合的边界检测算法[J]. 吉林大学学报(工学版), 2018, 48(5): 1621-1628. |
[12] | 赵宏伟, 刘宇琦, 董立岩, 王玉, 刘陪. 智能交通混合动态路径优化算法[J]. 吉林大学学报(工学版), 2018, 48(4): 1214-1223. |
[13] | 黄辉, 冯西安, 魏燕, 许驰, 陈慧灵. 基于增强核极限学习机的专业选择智能系统[J]. 吉林大学学报(工学版), 2018, 48(4): 1224-1230. |
[14] | 傅文博, 张杰, 陈永乐. 物联网环境下抵抗路由欺骗攻击的网络拓扑发现算法[J]. 吉林大学学报(工学版), 2018, 48(4): 1231-1236. |
[15] | 曹洁, 苏哲, 李晓旭. 基于Corr-LDA模型的图像标注方法[J]. 吉林大学学报(工学版), 2018, 48(4): 1237-1243. |
|