›› 2012, Vol. ›› Issue (03): 551-556.
王丹1, 刘忠长1, 王忠恕1, 刘江唯2, 张建瑞2
WANG Dan1, LIU Zhong-chang1, WANG Zhong-shu1, LIU Jiang-wei2, ZHANG Jian-rui2
摘要: 利用台架试验研究了缸内次后喷(LPI)对柴油机动力性、燃油经济性以及排放性能的影响,分析了不同工况、不同后喷油量下柴油机氧化催化器(DOC)的升温特性,提出了采用缸内次后喷和DOC提高排气温度进行柴油机微粒捕集器(DPF)主动再生的方法。试验结果表明:在中低负荷工况(40%和50%负荷率)通过缸内次后喷能够显著提高发动机排气中的HC排放,促进其在辅助升温装置DOC内的氧化发热,提高DPF入口排气温度,满足DPF主动再生对高温的需求。研究结果对于优化DOC与DPF的匹配有一定参考价值,为DPF再生方法及其控制策略的确定提供依据。
中图分类号:
[1] 谭丕强,胡志远,楼狄明,等.微粒捕集器再生技术的研究动态和发展趋势[J].车用发动机,2005,155(5):6-9. Tan Pi-qiang, Hu Zhi-yuan, Lou Di-ming, et al. A review of regeneration technology for diesel particulate filters[J]. Vehicle Engine, 2005, 155(5):6-9. [2] Suresh A, Yezerets A, Currier N, et al. Diesel particulate filter system-effect of critical variables on the regeneration strategy development and optimization[C]//SAE Paper, 2008-01-0329. [3] Toorisaka H, Minamikawa J, Narita H, et al. DPR developed for extremely low PM emissions in production commercial vehicles[C]//SAE Paper, 2004-01-0824. [4] 资新运,郭猛超,张伟,等.采用燃烧器+氧化催化器的柴油机微粒捕集器复合再生控制策略的研究[J].汽车工程, 2010,32(1):31-36. Zi Xin-yun, Guo Meng-chao, Zhang Wei, et al. A study on the compound regeneration control strategy for DPF using burner and DOC[J]. Automotive Engineering, 2010, 32(1):31-36. [5] Gardner T, Yetkin A, Shotwell R, et al. Evaluation of a DPF regeneration system and DOC performance using secondary fuel injection[C]//SAE Paper, 2009-01-2884. [6] Nishit N, He Xiao-lai, Vikram I, et al. Real time implementation of DOC-DPF models on a production-intent ECU for controls and diagnostics of a PM emission control system[C]//SAE Paper, 2009-01-2904. [7] Frobert A, Creff Y, Lepreux O, et al. Generating thermal conditions to regenerate a DPF: impact of the reductant on the performances of diesel oxidation catalysts[C]//SAE Paper, 2009-01-1085. [8] Huang Yi-qun, Lu Qi-long. Thermal management of a four-way catalyst system with alternative combustions for achieving future emissions standard[C]//SAE Paper, 2007-24-0103. [9] 李新,资新运,姚广涛,等. 柴油机排气微粒捕集器燃烧器再生技术研究[J].内燃机学报,2008,26(6):539-542. Li Xin, Zi Xin-yun, Yao Guang-tao, et al. Investigation on regeneration of a burner in diesel particulate trap[J]. Transactions of CSICE, 2008, 26(6):539-542. [10] Wang Dan, Liu Zhong-chang, Han Yong-qiang, et al. Experimental studies on pressure drop performance and regeneration safety of diesel particulate filter[C]//ICEICE 2011. Wuhan, china, 2011:2175-2178. |
[1] | 董伟,宋佰达,邱立涛,孙昊天,孙平,蒲超杰. 直喷汽油机暖机过程中两次喷射比例对燃烧和排放的影响[J]. 吉林大学学报(工学版), 2018, 48(6): 1755-1761. |
[2] | 林学东, 江涛, 许涛, 李德刚, 郭亮. 高压共轨柴油机起动工况高压泵控制策略[J]. 吉林大学学报(工学版), 2018, 48(5): 1436-1443. |
[3] | 李志军, 汪昊, 何丽, 曹丽娟, 张玉池, 赵新顺. 催化型微粒捕集器碳烟分布及其影响因素[J]. 吉林大学学报(工学版), 2018, 48(5): 1466-1474. |
[4] | 秦静, 徐鹤, 裴毅强, 左子农, 卢莉莉. 初始温度和初始压力对甲烷-甲醇裂解气预混层流燃烧特性的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1475-1482. |
[5] | 宫洵, 蒋冰晶, 胡云峰, 曲婷, 陈虹. 柴油机主-从双微元Urea-SCR系统非线性状态观测器设计与分析[J]. 吉林大学学报(工学版), 2018, 48(4): 1055-1062. |
[6] | 钟兵, 洪伟, 金兆辉, 苏岩, 解方喜, 张富伟. 进气门早关液压可变气门机构运动特性[J]. 吉林大学学报(工学版), 2018, 48(3): 727-734. |
[7] | 席雷, 徐亮, 高建民, 赵振, 王明森. 厚壁矩形带肋通道内蒸汽流动及传热特性[J]. 吉林大学学报(工学版), 2018, 48(3): 752-759. |
[8] | 李龙, 张幽彤, 左正兴. 变负载控制在自由活塞内燃发电机的缸压控制中的应用[J]. 吉林大学学报(工学版), 2018, 48(2): 473-479. |
[9] | 田径, 刘忠长, 刘金山, 董春晓, 钟铭, 杜文畅. 基于燃烧边界参数响应曲面设计的柴油机性能优化[J]. 吉林大学学报(工学版), 2018, 48(1): 159-165. |
[10] | 卫海桥, 裴自刚, 冯登全, 潘家营, 潘明章. 压电喷油器多次喷射对GDI汽油机颗粒物排放的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 166-173. |
[11] | 李志军, 何丽, 姜瑞, 申博玺, 孔祥金, 刘世宇. 柴油机微粒捕集器灰分分布对其压降的影响评价[J]. 吉林大学学报(工学版), 2017, 47(6): 1760-1766. |
[12] | 郭亮, 杨文昭, 王云开, 孙万臣, 程鹏, 李国良. 废气再循环对丁醇/柴油混合燃料发动机的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1767-1774. |
[13] | 虞浏, 刘忠长, 刘江唯, 杜宏飞, 许允. 直喷汽油机喷雾粒径特性[J]. 吉林大学学报(工学版), 2017, 47(5): 1482-1488. |
[14] | 刘忠长, 腾鹏坤, 田径, 许允, 亓升林, 于凯波. 二级增压柴油机旁通阀调节特性[J]. 吉林大学学报(工学版), 2017, 47(3): 796-803. |
[15] | 彭玮, 李国祥, 闫伟. 适用于发动机散热器的壁面函数改进[J]. 吉林大学学报(工学版), 2017, 47(3): 804-810. |
|