›› 2012, Vol. 42 ›› Issue (04): 930-935.
付文智1, 朱必章2, 张昊晗2, 李明哲1, 邓玉山1
FU Wen-zhi1, ZHU Bi-zhang2, ZHANG Hao-han2, LI Ming-zhe1, DENG Yu-shan1
摘要: 通过理论分析对球形件在柔性压辊拉伸成形装置上的成形位移加载方式进行了研究。利用几何解析方法,建立了球形件成形时各子压辊的位移量和板材延伸率的关系。对2024-O板料利用位移加载进行数值模拟,并与力加载的分析结果进行对比,结果表明位移加载的等效应力和等效塑性应变分布比较均匀。实验结果表明这种位移加载方式可行。与力加载相比,本文几何解析法可以快速计算出各个压辊加载所需的位移量,大大节省了调试时间,对蒙皮拉形有一定的指导意义。
中图分类号:
[1] 陈志红,李明哲,高占明. 蒙皮件多点拉形过程中成形缺陷的数值模拟[J]. 塑性工程学报,2007,14(3):112-116. Chen Zhi-hong, Li Ming-zhe,Gao Zhan-ming. Numerical simulation study about forming defects on the process of multi-point stretch-forming for skin parts[J]. Journal of Plasticity Engineering, 2007,14(3):112-116. [2] 张昊晗,李明哲,付文智,等.多辊下压式柔性拉形工艺及其数值模拟[J]. 吉林大学学报:工学版,2011,41(1):89-94. Zhang Hao-han,Li Ming-zhe,Fu Wen-zhi,et al. Technology and numerical simulation of multi-roll pressing stretch forming process[J]. Journal of Jilin University(Engineering and Technology Edition), 2011,41(1):89-94. [3] 茅梦云,何鑫华,李永丰,等. 柔性压辊拉形机原理及其数值模拟研究[J]. 锻压技术,2010,35(5):100-104. Mao Meng-yun, He Xin-hua, Li Yong-feng, et al. Flexible roller stretching machine principle and study of its numerical simulation[J]. Forging and Stamping Technology,2010,35(5):100-104. [4] 李永丰,丛晓霜,何鑫华,等. 柔性压辊拉形中回弹的数值模拟[J]. 塑性工程学报,2010,17(6):46-50. Li Yong-feng,Cong Xiao-shuang, He Xin-hua, et al. Numerical simulation on springback during stretch forming with flexible roller[J]. Journal of Plasticity Engineering,2010,17(6):46-50. [5] 张彦敏,周贤宾. 蒙皮拉形加载轨迹优化[J]. 北京航空航天大学学报,2007,33(2):201-204. Zhang Yan-min,Zhou Xian-bin. Optimization of loading trajectory in skin stretch forming process[J]. Journal of Beijing University of Aeronautics and Astronautics,2007,33(2):201-204. [6] Walczyk D F, Hardt D E. Design and analysis of reconfigurable discrete dies for sheet metal forming[J]. Journal of Manufacturing Systems, 1998,17(6):436-454. [7] Nader Asnafi. On spring back of double-curved auto body panels[J]. International Journal of Mechanical Sciences, 2001,43:5-37. [8] Cai Zhong-yi, Li Ming-zhe. Finite element simulation of multi-point sheet forming process based on implicit scheme[J]. Mater Process Technol, 2005,161(3):449-455. |
[1] | 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810. |
[2] | 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530. |
[3] | 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152. |
[4] | 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160. |
[5] | 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834. |
[6] | 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
[7] | 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228. |
[8] | 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833. |
[9] | 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841. |
[10] | 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847. |
[11] | 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853. |
[12] | 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860. |
[13] | 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541. |
[14] | 谷诤巍, 张文学, 吕萌萌, 王伟, 徐虹, 李欣. 宽翼边U型截面不锈钢型材拉弯成形缺陷控制[J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170. |
[15] | 寇淑清, 宋玮峰, 石舟. 36MnVS4连杆裂解加工模拟及缺陷分析[J]. 吉林大学学报(工学版), 2017, 47(3): 861-868. |
|