›› 2012, Vol. 42 ›› Issue (04): 936-941.
郑黎明1, 杨慎华1,2, 寇淑清1, 何东野1
ZHENG Li-ming1, YANG Shen-hua1,2, KOU Shu-qing1, HE Dong-ye1
摘要: 连杆裂解加载速度是影响裂解质量的重要参数之一,为了了解连杆裂解机床的加载速度特性、实现加载速度的优化,本文进行了虚拟样机仿真研究。首先,利用ADAMS/View和ADAMS/Hydraulics 模块建立裂解机床机械和液压系统模型;其次在MATLAB/Simulink模块下建立控制系统模型,包括恒定输入控制系统和基于位移反馈信号的输入控制系统;最后,设置好仿真参数,完成动态仿真,根据仿真结果,分析了裂解加载速度特性。仿真结果表明:恒定输入控制时,裂解缸加载速度为118 mm/s,既有利于裂解质量的控制,又不至于导致液压系统设计不合理;基于位移反馈信号时,椭圆输入控制曲线对于控制裂解油缸后程减速效果最为明显。对于实际液压油缸,可参照该曲线进行加载速度控制。
中图分类号:
[1] 杨慎华, 寇淑清,谷诤巍,等.发动机连杆裂解加工新技术[J].哈尔滨工业大学学报,2000,32(3):129-131. Yang Shen-hua, Kou Shu-qing, Gu Zheng-wei, et al. Fracture splitting processing of engine connecting rod[J]. Journal of Harbin Institute of Technology, 2000, 32(3):129-131. [2] 寇淑清,杨慎华,赵勇, 等. 发动机连杆裂解加工及其关键技术[J]. 吉林大学学报:工学版,2004,34(1):85-90. Kou Shu-qing,Yang Shen-hua,Zhao Yong,et al.Fracture splitting process of engine connecting rod and its key techniques[J].Journal of Jilin University(Engineering and Technology Edition),2004,34(1):85-90. [3] Gu Z, Yang S, Ku S, et al. Fracture splitting technology of automobile engine connecting rod[J]. Advanced Manufacture Technology, 2005, 25:883-887. [4] 张志强.发动机连杆裂解加工影响因素数值分析及试验研究.长春.吉林大学材料科学与工程学院,2007. Zhang Zhi-qiang. Numerical simulation and experimental study on effect factors of engine connecting rod fracture splitting.Changchun:College of Materials Science and Engineering, Jilin University, 2007. [5] 郑建荣.虚拟样机技术入门与提高[M]. 北京:机械工业出版社,2005. [6] 陈立平,张云清,任卫群,等.机械系统动力学分析及ADAMS应用教程[M].北京:清华大学出版社.2006. [7] 王国强,张进平,马若丁,等.虚拟样机技术及其在ADAMS上的实践[M].西安:西北工业大学出版社,2002. |
[1] | 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810. |
[2] | 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530. |
[3] | 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983. |
[4] | 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152. |
[5] | 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160. |
[6] | 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834. |
[7] | 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
[8] | 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228. |
[9] | 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833. |
[10] | 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841. |
[11] | 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847. |
[12] | 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853. |
[13] | 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860. |
[14] | 靳立强, 孙志祥, 郑迎. 电动轮汽车复合再生制动系统防抱协调控制[J]. 吉林大学学报(工学版), 2017, 47(5): 1344-1351. |
[15] | 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541. |
|