吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (1): 221-228.doi: 10.13229/j.cnki.jdxbgxb20170021

• 论文 • 上一篇    下一篇

多点冲头主动加载路径对薄板拉形的影响

刘纯国, 刘伟东, 邓玉山   

  1. 吉林大学 辊锻工艺研究所,长春 130022
  • 收稿日期:2017-01-06 出版日期:2018-02-26 发布日期:2018-02-26
  • 作者简介:刘纯国(1970-),男,教授,博士生导师. 研究方向:板料成形. E-mail:liucg@jlu.edu.cn
  • 基金资助:
    国家自然科学基金项目(51575231)

Effect of multi-point punch active loading path on the stretch-forming of sheet

LIU Chun-guo, LIU Wei-dong, DENG Yu-shan   

  1. Roll Forging Research Institute, Jilin University, Changchun 130022,China
  • Received:2017-01-06 Online:2018-02-26 Published:2018-02-26

RICH HTML

0   

PDF (PC)

301

摘要： 研究了多点拉形过程中3种加载路径对板料拉形质量的影响。基于平面应变假设,对多点拉形和等差曲率冲头主动加载拉形中铝合金薄板的受力特点进行了对比分析,同时应用数值模拟研究了多点拉形与多点冲头主动加载拉形中3种路径对板料应力、应变及延伸率分布的影响规律。结果表明:与多点拉形相比,等速冲头主动加载、等时冲头主动加载及等差曲率冲头主动加载3种拉形方式均能减小板料钳口处的应力集中,提高工件的应力、应变、延伸率分布均匀性,其中等差曲率冲头主动加载路径拉形效果最好。

关键词: 材料合成与加工工艺, 多点模具, 加载路径, 拉形, 数值模拟

Abstract: In This paper the influences of three different loading paths on the quality of stretch- forming were studied. Based on the plane strain assumption, the s tress state of Al alloy sheet between multi-point stretch-forming and equidifferent-curvature punch active loading stretch-forming were compared and analyzed. The strain, stress, elongation distribution of the multi-point stretch-forming and the multi-point punch active loading stretch-forming under three different loading conditions were studied by numerical simulation. Results show that, compared with the multi-point stretch-forming, constant velocity punch active loading, isochronous punch active loading and equidifferent-curvature punch active loading can not only reduce the stress concentration in the position between the sheet and jaw, but also improve the uniformity of the distribution of stress, strain and elongation. The results confirm that equidifferent-curvature punch active loading method can achieve the best formability of Al alloy sheet.

Key words: materials synthesis and processing technology, multi-point die, loading path, stretch-forming, numerical simulation

中图分类号: 

  • TG386.41
[1] Tan Fu-xing, Li Ming-zhe, Cai Zhong-yi.Formability analysis on the process of multi-point forming for titanium alloy retiary sheet[J]. International Journal of Advanced Manufacturing Technology, 2009, 41(11): 1059-1065.
[2] Philippe Dal Santo, Guénaël Germain, Serge Boude, et al.Cold forming by stretching of aeronautic sheet metal parts[J]. International Journal of Computer Integrated Manufacturing, 2014, 27(2): 344-351.
[3] Kohara S.Forming limit curves of aluminum andaluminum alloy sheets and effects of strain path on thecurves[J]. Materials Processing Technology, 1993, 38(3): 723-735.
[4] 蔡中义,张海明,李光俊,等. 多点拉形数值模拟及模具型面补偿方法[J]. 吉林大学学报:工学版, 2008, 38(2): 329-333.
Cai Zhong-yi, Zhang Hai-ming, Li Guang-jun, et al.Numerical simulation of sheet metal multi-point stretch forming and compensation of die surface[J]. Journal of Jilin University (Engineering Science), 2008, 38(2): 329-333.
[5] 周朝晖,蔡中义,李明哲. 多点模具的拉形工艺及其数值模拟[J].吉林大学学报:工学版, 2005, 35(3): 287-291.
Zhou Zhao-hui, Cai Zhong-yi, Li Ming-zhe.Stretching process based on multi-point die and its numerical simulation[J]. Journal of Jilin University (Engineering Science), 2005, 35(3): 287-291.
[6] Li X J, Zhang Z Q, Zheng Q F, et al.A study of basic mechanics in the multi-point single-point incremental combined forming of sheets metal[J]. Materials ResearchInnovations, 2015, 19(5): 385-388.
[7] 陈雪,李明哲,付文智,等. 基于多点模的板材柔性夹钳拉形夹持力[J]. 吉林大学学报:工学版, 2011, 41(1): 95-99.
Chen Xue, Li Ming-zhe, Fu Wen-zhi, et al.Clamping force of sheet metal flexible grippers stretch-forming based on multi-point die[J]. Journal of Jilin University (Engineering Science), 2011, 41(1): 95-99.
[8] Wiebengaa J H, Atzemab E H, van den Boogaardc A H.Stretching the limits of forming processes by robust optimization: a numerical and experimental demon- strator[J]. Journal of Materials Processing Technology, 2015, 217(5): 345-355.
[9] 王丽丽,李东升,李小强,等. 可重构柔性多点模具蒙皮拉形模面补偿算法[J]. 北京航空航天大学学报, 2011, 37(8): 1011-1015.
Wang Li-li, Li Dong-sheng, Li Xiao-qiang, et al.Die-face compensation algorithm in stretch forming of aircraft skin over reconfigurable compliant tooling[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(8): 1011-1015.
[10] 张冬娟,崔振山,李玉强,等. 平面应变板料拉弯成形回弹理论分析[J]. 工程力学, 2007, 24(7): 66-71.
Zhang Dong-juan, Cui Zhen-shan, Li Yu-qiang, et al.Springback of sheet metal after plane strain Stretch-bending[J]. Engineering Mechanics, 2007, 24(7): 66-71.
[11] Paulsen Frode, Welo Torgeir.Application of numerical simulation in the bending of aluminum-alloy profiles[J]. Journal of Materials Processing Technology, 1996, 58(2): 274-285.
[1] 郭昊添,徐涛,梁逍,于征磊,刘欢,马龙. 仿鲨鳃扰流结构的过渡段换热表面优化设计[J]. 吉林大学学报(工学版), 2018, 48(6): 1793-1798.
[2] 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810.
[3] 宫亚峰, 王博, 魏海斌, 何自珩, 何钰龙, 申杨凡. 基于Peck公式的双线盾构隧道地表沉降规律[J]. 吉林大学学报(工学版), 2018, 48(5): 1411-1417.
[4] 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530.
[5] 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[6] 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[7] 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[8] 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[9] 付文智, 刘晓东, 王洪波, 闫德俊, 刘晓莉, 李明哲, 董玉其, 曾振华, 刘桂彬. 关于1561铝合金曲面件的多点成形工艺[J]. 吉林大学学报(工学版), 2017, 47(6): 1822-1828.
[10] 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833.
[11] 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[12] 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847.
[13] 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853.
[14] 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[15] 王宏朝, 单希壮, 杨志刚. 地面效应模拟对环境风洞中车辆冷却系统试验影响的数值模拟[J]. 吉林大学学报(工学版), 2017, 47(5): 1373-1378.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发