Journal of Jilin University(Engineering and Technology Edition) ›› 2023, Vol. 53 ›› Issue (7): 1892-1901.doi: 10.13229/j.cnki.jdxbgxb.20211038

Previous Articles    

Analysis of diesel particulate filter channel flow field and its noise characteristics in plateau environment

Gui-sheng CHEN1,2(),Guo-yan LUO1,2,Liang-xue LI1,2,Zhen HUANG1,2(),Yi LI3   

  1. 1.College of Transportation Engineering，Kunming University of Science and Technology，Kunming 650500，China
    2.Yunnan Key Laboratory of Internal Combustion Engine，Kunming University of Science and Technology，Kunming 650500，China
    3.Yunnan Filter Environment Protection Science & Technology Corporation Limited，Kunming 650300，China
  • Received:2021-10-11 Online:2023-07-01 Published:2023-07-20
  • Contact: Zhen HUANG E-mail:cgs_yly@163.com;1329627964@qq.com

RICH HTML

 4   

PDF (PC)

310

Abstract:

A 3D model of Diesel Particulate Filter（DPF） was established by CFD software， the influence of soot and ash distribution on the airflow movement of dissymmetric DPF ducts was studied. A one-dimensional thermodynamic model of engine was used to analyze influence of the DPF carries size， wall thickness， and the inlet/outlet aperture ratio on exhaust noise under plateau environment. The results showed that： the flow velocity of DPF inlet port has been increases first and then decreases axially from the beginning end. The flow velocity of the DPF inlet port has been decreases radially from the center. The carrier diameter has significant impact on noise than the length under plateau environment. The carrier diameter of 190 mm has a better noise attenuation effect than the diameter of 170 mm， reaching more than 3 dB. The inlet/outlet aperture ratio is 1.1， the end of DPF noise is the lowest， the attenuation amplitude increases with the increase in carbon loading （0~8 g/L）， the noise attenuation effect is better more than 3 dB.

Key words: power machinery and engineering, diesel engine, computational fluid dynamics（CFD）, diesel particulate filter（DPF）, plateau environment, noise characteristics, channel flow field, ash distribution coefficient

CLC Number: 

  • TK442

Table 1

Engine specifications"

参 数具体数值
发动机机型直列4缸四冲程
燃油系统电控高压共轨
进气形式增压中冷
压缩比16.6
排量/L2.977
额定功率/kW100/（3000 r·min-1）
最大转矩/（N·m）381/（1600~2600 r·min-1）

Table 2

DPF specifications"

参 数具体数值
材质碳化硅
直径×长度/mm×mm170×200
配比1.5
孔密度/CPSI300
孔隙率/%43
孔径分布/μm5~32
壁厚/mm0.2525

Fig.1

DPF exhaust noise diagram"

Fig.2

DPF micro channel model"

Fig.3

DPF channel grid model"

Fig.4

DPF inlet/exhaust channel centerlinedimensionless velocity verification"

Fig.5

Comparison between experiment and simulationof DPF noise"

Fig.6

Noise spectrum diagram"

Fig.7

Flow rate variation diagram of inlet passage"

Fig.8

Diagram of flow rate variation in exhaust channel"

Fig.9

Velocity changes of DPF inlet center line"

Fig.10

Center line velocity changes of the DPF outlet channel"

Fig.11

DPF inlet flow velocity changes along radialposition"

Fig.12

DPF outlet flow velocity changes along radialposition"

Fig.13

Insertion loss of DPF"

Fig.14

Influence of carrier size on DPF noise"

Fig.15

Influence of wall thickness on noise of DPF"

Fig.16

Influence of inlet and outlet aperture on DPFnoise"

1 Lee S H, Kwak J H, Lee S Y, et al. On-road chasing and laboratory measurements of exhaust particle emissions of diesel vehicles equipped with aftertreatment technologies (DPF, urea-SCR) [J]. International Journal of Automotive Technology, 2015, 16(4): 551-559.
2 Yamamoto K, Sakai T. Simulation of continuously regenerating trap with catalyzed DPF[J]. Catalysis Today, 2015, 242: 357-362.
3 李志军, 侯普辉, 焦鹏昊, 等. DPF孔道内流场及微粒沉积特性的数值模拟[J]. 天津大学学报:自然科学与工程技术版,2015, 48(10): 914-920.
Li Zhi-jun, Hou Pu-hui, Jiao Peng-hao, et al. Numerical Simulation for Flow and Soot A- ccumulation in the Channels of Diesel Particulate Filter[J] Journal of Tianjin University(Science and Technology), 2015, 48(10): 914-920.
4 李志军, 王楠, 张立强, 等.柴油机微粒捕集器非对称孔道内流场和压降特性模拟[J]. 吉林大学学报:工学版, 2016, 46(6): 1892-1899.
Li Zhi-jun, Wang Nan, Zhang Li-qiang, et al. Numerical simulation for flow and pressure drop characteristics in asymmetrical channels of diesel particulate filter[J]. Journal of Jilin University(Engineering and Technology Edition), 2016, 46(6): 1892-1899.
5 李冰, 李靓雪, 陈贵升, 等. 柴油机DPF孔道气相流场及噪声特性分析[J]. 内燃机学报, 2021, 39(3): 265-272.
Li Bing, Li Liang-xue, Chen Gui-sheng, et al. Analysis of gas phase flow in channels and its noise characteristics for a diesel engine DPF[J]. Transactions of CSICE, 2021, 39(3): 265-272.
6 Hua X, Herrin D W, Wu T W, et al. Simulation of diesel particulate filters in large exhaust systems[J]. Applied Acoustics, 2013, 74(12): 1326-1332.
7 Gao W, Feng L. FEM analysis on acoustic performance of wall flow diesel particulate filters[J]. Chinese Journal of Mechanical Engineering, 2011, 24(4): 701-706.
8 Montenegro G, Onorati A, Torre D, et al. The 3D cell approach for the acoustic modeling of after-treatment devices[J]. SAE International Journal of Engines, 2011, 4(2): 2519-2530.
9 陈贵升, 周群林, 马龙杰, 等. 柴油机DPF压降及噪声特性分析[J]. 汽车工程, 2020, 42(7): 874-881.
Chen Gui-sheng, Zhou Qun-lin, Ma Long-jie, et al. Analysis of DPF pressure drop and noise characteristics of diesel engine[J]. Automotive Engineering, 2020, 42(7): 874-881.
10 饶均. 汽车排气系统流动特性与声学特性研究[D]. 重庆: 重庆交通大学航运与船舶工程学院, 2016.
Rao Jun. Study on flow performance and acoustic performance of automobile exhaust system[D]. Chongqing: College of Shipping and Marine Engineering,Chongqing Jiaotong University, 2016.
11 邓兆祥, 赵海军, 赵世举, 等. 穿孔管消声单元气流再生噪声产生机理[J]. 内燃机学报, 2009, 27(5):452-457.
Deng Zhao-xiang, Zhao Hai-jun, Zhao Shi-ju, et al. Producing mechanism of flow noise generation from perforated duct muffler element[J]. Transactions of CSICE, 2009, 27(5): 452-457.
12 陈贵升, 吕誉, 沈颖刚, 等. 高原环境下增压柴油机耦合DPF的性能仿真[J]. 内燃机学报, 2019, 37(6): 505-513.
Chen Gui-sheng, Lv Yu, Shen Ying-gang, et al. Simulation study of performances in plateau environment on a turbocharged diesel engine coupled with DPF[J]. Transactions of CSICE, 2019, 37(6): 505-513.
13 Morsi S A, Alexander A J. An investigation of particle trajectories in two-phase flow systems[J]. Journal of Fluid Mechanics, 1972, 55(2): 193-208.
14 Zhang X G, Tennison P, Ruona W. 3D numerical study of pressure Loss characteristics and filtration efficiency through a frontal unplugged DPF[J]. SAE International Journal of Fuels & Lubricants, 2010, 3(1): 177-193.
[1] Yan ZHANG,Wei LIU,Shu-yong ZHANG,Yi-qiang PEI,Meng-meng DONG,Jing QIN. Optimization on thermal load of combustion chamber on two/four⁃stroke switchable diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(3): 504-514.
[2] Wen-zhi GAO,Yan-jun WANG,Xin-wei WANG,Pan ZHANG,Yong LI,Yang DONG. Real⁃time diagnosis for misfire fault of diesel engine based on convolutional neural network [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 417-424.
[3] Zhong-hua GU,Pei-gang YAN,Pan-hong LIU,Xiang-feng WANG. Applying data driven algorithm to promote prediction accuracy of separation boundary simulation with eddy viscosity model [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(11): 2532-2541.
[4] Dong TANG,Yu-bin HAN,Lun HUA,Jin-chong PAN,Sheng LIU. Effect of lubricating oil ash on performance of gasoline particle filter in direct injection gasoline engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(11): 2501-2507.
[5] Wen-bo ZHAO,Yu-jie LI,Jun DENG,Li-guang LI,Zhi-jun WU. Needle motion and its influence on in-nozzle flow and spray jet characteristics [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(10): 2234-2243.
[6] Zhi-jun LI,Hao LIU,Li-peng ZHANG,Zhen-guo LI,Yuan-kai SHAO,Zhi-yang LI. Simulation on influence of microstructure of the wall on deep bed filtration of particulate filter [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 422-434.
[7] Zhong WANG,You LI,Mei-juan ZHANG,Shuai LIU,Rui-na LI,Huai-bei ZHAO. Analysis on particle collision dynamics parameters in diesel exhaust stage [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 39-48.
[8] Yun-feng HU,Yi-tong DING,Zhi-xin ZHAO,Bing-jing JIANG,Jin-wu GAO. Data-driven modeling and receding optimization control of diesel engine combustion process [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 49-62.
[9] Jian WANG,Xin XU,Han GU,Duo-jun ZHANG,Sheng-ji LIU. Heating characteristics of DOC based on exhaust thermal management of diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 408-416.
[10] Chang-qing SONG,Wen-miao CHEN,Jun LI,Da-wei QU,Hao CUI. Effects of single and dual ignition on combustion characteristics of natural gas under different equivalence ratios [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1929-1935.
[11] Yi-xiao ZHU,Xiao-min HE,Yi JIN. Effects of radial strut width on flow structure ofsingle⁃cavity trapped vortex combustor [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1936-1944.
[12] Xin CHEN,Xin-jian RUAN,Ming LI,Ning WANG,Jia-ning WANG,Kai-xuan PAN. Application of modified discrete scheme based onlarge eddy simulation [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1756-1763.
[13] Chang-cheng LIU,Zhong-chang LIU,Jing TIAN,Yun XU,Ze-yu YANG. In⁃cylinder exergy destruction during combustion process ofheavy⁃duty turbocharged diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1911-1919.
[14] Qiao WANG,Wan-chen SUN,Liang GUO,Peng CHENG,Lu-yan FAN,Guo-liang LI. Effects of butanol/diesel blends on combustion and particulate emission characteristics of compression ignition engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1920-1928.
[15] Xiao-yu HU,Guo-xiang LI,Shu-zhan BAI,Ke SUN,Si-yuan LI. Modified boiling heat transfer model considering roughness and material of heating surface [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1945-1950.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd