Journal of Jilin University(Engineering and Technology Edition) ›› 2019, Vol. 49 ›› Issue (3): 829-835.doi: 10.13229/j.cnki.jdxbgxb20180419

Previous Articles     Next Articles

Scratch resistance of aluminum automotive coatings based on continuum damage mechanics

Wei⁃min ZHUANG1(),Peng⁃yue WANG1,Dong⁃xuan XIE2,Yan⁃hong CHEN3   

  1. 1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
    2. FAW?Volkswagen Automotive Co. , Ltd. , Changchun 130011, China
    3. Department of Aeronautics，Imperial College，London SW7 2AZ 1, England
  • Received:2018-05-02 Online:2019-05-01 Published:2019-07-12

RICH HTML

 3   

PDF (PC)

98

Abstract:

Continuum Damage Mechanics (CDM) was introduced into the finite element analysis of scratch resistance of coatings. Firstly, a damage mechanics based on the material model was created. Secondly, this material model was implemented into ABAQUS solver through user defined subroutine VUMAT. Finally, a series of analyses were carried out to analyze the mechanical behavior of coatings. The material model could be used not only to capture the stress distribution of coatings, but also to predict the damage evolution of coatings under scratch loading. In addition, it is found that the loading speed and coating thickness have certain effects on scratch resistance, but the properties and thickness of substrate have little effect on it. The theoretical support was provided for the optimal design of the coating material.

Key words: surface coating material, continuum damage mechanics(CDM), user?defined material subroutine, scratch resistance of coating

CLC Number: 

  • TQ630.7

Table 1

Fitting material parameters"

材料参数AA5052AA6061?T6UL800实色漆涂层
密度/(g·cm－1)2.72.71.5
E/MPa85710701601821
υ0.280.280.32
n13.4282.2
K/MPa33.373016.5
k/MPa85.4426510
A18.3168
B/MPa169.45150.3055
C0.270.72.8
m1.5611.2
n213.07.59

Fig.1

Fitting curves of AA5052 and AA6061?T6"

Fig.2

Fitting curve of coating UL800"

Fig.3

Flow chart of VUMAT"

Fig.4

Schematic representation of coating model"

Fig.5

Stress distribution under different scratching distance"

Fig.6

Damage distribution and failure morphology under different scratch distance"

Fig.7

Scratch curves"

Fig.8

SEM image of automobile coating"

Fig.9

Relationship between coating reaction and penetration depth"

Fig.10

Relationship between scratch resistance of coating and loading speed"

Fig.11

Relationship between scratch resistance of coating and substrate material"

Fig.12

Relationship between scratch resistance and the thickness of coating and substrate"

1 ChristopherS, NieteringK, NicholsM. An overview of the scratch resistance of automotive coatings: exterior clearcoats and polycarbonate hardcoats[J]. Coatings,2012,2(4):221⁃234.
2 BrowningR, SueH J, MinkwitzR, et al. Effects of acrylonitrile content and molecular weight on the scratch behavior of styrene⁃acrylonitrile random copolymers[J]. Polymer Engineering & Science,2011,51(11):2282⁃2294.
3 HainsworthS, KilgallonP. Temperature variant scratch deformation response of automotive paint systems[J]. Progress in Organic Coatings,2008,62(9):
21⁃27.
4 InabaH. Applications of numerical analysis to the evaluation of scratch resistance for automotive clear coatings[J]. Pigments Paints & Printing Inks,2010,83(11):449⁃457.
5 FelderE, BucailleJ L, HochstetterG. Influence of the rheology of polymers on their scratch resistance: Experimental and numerical simulation studies[J]. Annales de Chimie Science des Matériaux,2011,28(3):15⁃28.
6 庄蔚敏,陈延红. 基于连续损伤力学的表面涂层损伤模拟[J]. 吉林大学学报：工学版,2012,42(4):857⁃862.
ZhuangWei⁃min,ChenYan⁃hong. Research on the failure of surface coatings based on continuum damage mechanics[J]. Journal of Jilin University(Engineering and Technology Edition),2012,42(4):857⁃862.
7 LemaitreJ. Engineering Damage Mechanics[M]. Berlin: Springer Berlin Heidelberg,2010.
8 LinJ, HavhurstD, DysonB. A new design of uniaxial testpiece with slit extensometer ridges for improved accuracy of strain measurement[J]. International Journal of Mechnical Sciences,1993,35(1):63⁃78.
9 LinJ, LiuY, FarrugiaD, et al. Development of dislocation based⁃unified material model for simulating microstructure evolution in multipass hot rolling[J]. Philosophical Magazine A,2005,85(18):1967⁃1987.
10 LiB, LinJ, YaoX. A novel evolutionary algorithm for determining unified creep damage constitutive equations[J]. International Journal of Mechanical Sciences,2002,44(2): 987⁃1002.
11 CaoJ, LinJ. A study on formulation of objective functions for determining material models[J]. International Journal of Mechanical Sciences,2008,50(7):193⁃204.
12 刘大海，于海平，李春峰，等. AA5052板材准静态/动态平面应变成形极限实验研究[J]. 材料科学与工艺，2009，17(5)：593⁃596.
LiuDa⁃hai, YuHai⁃ping, LiChun⁃feng, et al. Experimental investigation on forming limits of AA5052 sheet in hybrid quasi⁃static/dynamic plane⁃strain tensile process[J]. Materials Science and Technology,2009,17(5):593⁃596.
13 AminiK, AltenhofW, YuenS C K, et al. Experimental and numerical investigation on the deformation and energy dissipation of AA6061⁃T6 circular extrusion subjected to blast loading[J]. International Journal of Impact Engineering,2017,110:228⁃241.
14 罗正怡. 汽车涂层力学性能测试及分析[D]. 成都：西南交通大学力学与工程学院,2009.
LuoZheng⁃yi. Testing and analysis of mechanical properties for automotive coatings[D]. Chengdu:School of Mechanics and Engineering,Southwest Jiaotong University,2009.
No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI Qing-quan, GAO De-quan, YANG Bi-sheng. Urban road traffic status classification based on fuzzy support vector machines[J]. 吉林大学学报(工学版), 2009, 39(增刊2): 131 -0134 .
[2] ZHANG Lin, ZHAO Hong-wei, YANG Yi-han, MA Zhi-chao, HUANG Hu, MA Zhi-chao. Molecular dynamics simulation of nanoindentation of single-layer graphene sheet[J]. 吉林大学学报(工学版), 2013, 43(06): 1558 -1565 .
[3] LIU Chun-xiang, GUO Yong-fei, LI Ning, XUE Xu-cheng, LYU Heng-yi. Real-time composing and compression of image within multi-channel spaceborne camera[J]. 吉林大学学报(工学版), 2013, 43(06): 1680 -1684 .
[4] Chen Yu-dong . Recursive procedure for designing the multiinput modal
controllers for the nearly defective systems
[J]. 吉林大学学报(工学版), 2008, 38(增刊): 137 -0140 .
[5] XUE Jian-bin， ZHU Yan-feng，YUAN Zhan-ting . Adaptive data rate algorithm in IEEE 802.16e sleep mode operation

[J]. 吉林大学学报(工学版), 2009, 39(02): 519 -0524 .
[6] ZONG Chang-Fu, ZHANG Ji-Gong, CHEN Guo-Ying, JIANG Nan. Investigating regenerative braking performance of 4WD and FWD electric vehicle[J]. 吉林大学学报(工学版), 2010, 40(增刊): 24 -0028 .
[7] ZHAO Shou-jing, AN Yan, MENG Yang, HE Mu-yang, QU Qing-ling, HAO Dong-yun. Effect of interference expression of cycloartenol synthase gene on content of ginsenoside[J]. 吉林大学学报(工学版), 2014, 44(6): 1867 -1870 .
[8] QIAN Zhi-hong, FENG Dong, WANG Xue, LI Qian. Multipath routing algorithm in M2M network based on load balancing[J]. 吉林大学学报(工学版), 2016, 46(3): 934 -940 .
[9] YONG Jia-wang, GAO Feng, DING Neng-gen, HU Xian-rong. Hardware-in-the-loop test for a braking system of pressure individual regulation[J]. 吉林大学学报(工学版), 2016, 46(4): 1070 -1075 .
[10] LIANG Shi-dong, ZHAO Shu-zhi, MA Ming-hui, LIU Hua-sheng, LU Chun-xiu. Impacts of linear bus stop on bus delays[J]. 吉林大学学报(工学版), 2016, 46(6): 1807 -1817 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd