Journal of Jilin University(Engineering and Technology Edition) ›› 2020, Vol. 50 ›› Issue (1): 66-76.doi: 10.13229/j.cnki.jdxbgxb20180835

Previous Articles     Next Articles

Kinematic analysis and simulation of folding process for rigid origami mechanisms

Zhen GUO(),Hong-ying YU(),Zhong-xin HUA,Di ZHAO   

  1. School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China
  • Received:2018-08-13 Online:2020-01-01 Published:2020-02-06
  • Contact: Hong-ying YU E-mail:guozhen.vip@foxmail.com;mcadyhy@hit.edu.cn

RICH HTML

 35   

PDF (PC)

662

Abstract:

In order to analyze the kinematic characteristics of rigid origami mechanism and study the folding process of different patterns, the kinematic model of rigid origami mechanisms is established and the folding state of typical pattern is analyzed. Firstly, the relation equation between the rotation angle of creases at a single vertex is established, the explicit expression of the unknown angle of creases is derived, and the interference solution is eliminated through the mutual test of equation solutions to obtain the actual rotation angle of the arbitrary folding state. Secondly, using the rotation transformation matrix, the real time coordinates of the vertex are calculated. Thirdly, the intersection test algorithm of triangular facets is applied to judge interference of rigid origami mechanism, and the interference in the folding process is detected. Finally, the folding process simulation platform is established, and the folding process of typical rigid origami mechanism is analyzed. The simulation results coincide with the actual folding process, which verifies the correctness of the kinematic analysis method of rigid origami mechanisms and the applicability of the simulation platform.

Key words: mechanical design and theory, rigid origami mechanism, kinematic analysis, interference judgment, simulation of folding process

CLC Number: 

  • TH112

Fig.1

Single vertex configuration and its folded state"

Fig.2

Process of coordinate transformation"

Fig.3

Two folded states"

Fig.4

Solving process of relation equations between rotation angle of creases"

Fig.5

Rotation transformation process"

Fig.6

Point p0 rotate around multiple axes and change to point p0'"

Fig.7

Positional relationship between points and triangular facets"

Fig.8

Four-sided flasher model"

Fig.9

Relationship between rotation angles of creases"

Fig.10

Whole process of simulation analysis"

Fig.11

Configurations and their folding states"

Table 1

Running time of simulation analysis of each configuration"

构型交点数自由度60个中间构态运行时间/s45个中间构态运行时间/s
flasher(中心为等边三角形)331.418 2601.122 093
flasher(中心为正方形)442.366 6391.899 969
三浦折叠412.527 5171.962 476
waterbomb181722.896 67917.315 526
1 Chen Y, Rui P, Zhong You. Origami of thick panels[J]. Science, 2015, 349(6246): 396-400.
2 Chen Y, Fan L Z, Feng J. Kinematic of symmetric deployable scissor-hinge structures with integral mechanism mode[J]. Computers and Structures, 2017, 191: 140-152.
3 Wei G W, Chen Y, Jian S. Dai. Synthesis, mobility, and multifurcation of deployable polyhedral mechanisms with radially reciprocating motion[J]. Journal of Mechanical Design-Transactions of the ASME, 2014, 136(9): 91003-91015.
4 Tachi T. Rigid origami mechanisms[J]. Journal of the Robotics Society of Japan, 2016, 34(3): 184-191.
5 Zachary A, Jason C, Erik D D, et al. Rigid origami vertices: conditions and forcing sets[J]. Journal of Coumputational Geometry, 2016, 7(1): 229-237.
6 Balkcom D J, Mason M T. Robotic origami folding[J]. International Journal of Robotics Research, 2008, 27(5): 613-627.
7 Tomohiro Tachi. Simulation of rigid origami[C]∥Origami 4: Proceedings the 4th International Meeting of Origami Mathematics, Science, and Education. Natick, Massachusetts: A K Peters, 2009.
8 An B, Benbernou N, Demaine E D, et al. Planning to fold multiple objects from a single self-folding sheet[J]. Robotica, 2011, 29(1): 87-102.
9 Wu W N, Zhong Y. A solution for folding rigid tall shopping bags[J]. Proceedings Mathematical Physical and Engineering Sciences, 2011, 467(2133): 2561-2574.
10 Chen Y, Feng J. Improved symmetry method for the mobility of regular structures using graph products[J]. Journal of Structural Engineering, 2016, 142(9): 51-65.
11 Chen Y, Feng J, Liu Y Q. A group-theoretic approach to the mobility and kinematic of symmetric over-constrained structures[J]. Mechanism and Machine Theory, 2016, 105: 91-107.
12 Chen Y, Feng J. Folding of a Type of deployable origami structures[J]. International Journal of Structural Stability and Dynamics, 2012, 12(6): 193-202.
13 Xi Z H, Lien J M. Plan folding Motion for rigid origami via discrete domain sampling[C]∥IEEE International Conference on Robotics and Automation, Seattle, Washington, 2015: 2938-2943.
14 Liu S C, Lv W L, Chen Y, et al. Deployable prismatic structures with rigid origami patterns[J]. Journal of Mechanisms and Robotics, 2015, 8(3): No.031002.
15 Cai J G, Zhang Y T, Xu Y X, et al. The Foldability of cylindrical foldable structures based on rigid origami[J]. Journal of Mechanical Design, 2016, 138(3): No.031401.
16 Peraza H E A, Hartl D J, Akleman E, et al. Modeling and analysis of origami structures with smooth folds[J]. Computer-Aided Design, 2016, 78: 93-106.
17 Yu H Y, Guo Z, Wang J R. A method of calculating the degree of freedom of foldable plate rigid origami with adjacency matrix[J]. Advances in Mechanical Engineering, 2018, 10(6): 969-989.
18 Tomas Möller. Fast triangle-triangle intersection test[M]. Wellesley:A K Peters, 1997.
19 Tropp O, Tal A, Shimshoni I. A fast triangle to triangle intersection test for collision detection[J]. Computer Animation and Virtual Worlds, 2006, 17(5): 527-535.
20 于海燕，何援军. 空间两三角形的相交问题[J]. 图学学报, 2013, 34(4): 54-62.
Yu Hai-yan, He Yuan-jun. Testing the intersection status of two triangles[J]. Journal of Graphics, 2013, 34(4): 54-62.
21 关立文，戴玉喜，王立平. 空间三角面片对相交判断算法[J]. 清华大学学报：自然科学版, 2017，57(9): 970-974.
Guan Li-wen, Dai Yu-xi, Wang Li-ping. Intersection test algorithm for spacial triangular facets[J]. Journal of Tsinghua University (Science and Technology), 2017, 57(9): 970-974.
[1] ZHU Wei,WANG Chuan-wei,GU Kai-rong,SHEN Hui-ping,XU Ke,WANG Yuan. Stiffness and dynamics analysis of a new type of tensegrity parallel mechanism [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1777-1786.
[2] CHEN Dong-hui, LIU Wei, LYU Jian-hua, CHANG Zhi-yong, WU Ting, MU Hai-feng. Bionic design of corn stubble collector based on surface structure of Patinopecten yessoensis [J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd