吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (06): 1500-1503.doi: 10.7964/jdxbgxb201306011

• paper • Previous Articles     Next Articles

Reliability analysis of reinforced concrete member under fire load

JIANG Feng-guo, ZHAO Jing-lu   

  1. School of Civil Engineering, Heilongjiang Institute of Science and Technology, Harbin 150027, China
  • Received:2013-02-12 Online:2013-11-01 Published:2013-11-01

RICH HTML

0   

PDF (PC)

499

Abstract:

Under considerations of the capacity reduction factor and fire load factor, the limit state equations of the component reliability analysis were established. The reliability of the reinforced concrete member after fire was analyzed. The mechanical properties, e.g. yield strength, and sectional properties, e.g. cross-sectional area, etc, of reinforced bar are considered to be random variables. A number of parameters that affect the structural reliability, including the fire load, ratio of floor area to the total area of the fire compartment, dead load, and live load are also taken as random variables. The change of the load effect of the limit state equations after fire was considered. Then the reliability of reinforced concrete member was analyzed. Results show that fire load effect has high impact on the reliability of the structure after fire. So the fire load can not be ignored under some conditions.

Key words: civil engineering structure, fire load, load effect, structure reliability, temperature field

CLC Number: 

  • TU378.2

[1] 欧阳志为, 郑文忠. 火灾下有粘结预应力混凝土简支梁板的变形非线性分析[J].吉林大学学报:工学版, 2009,36(2):125-127. Ouyang Zhi-wei, Zheng Wen-zhong. Nonlinear analysis on deflection of prestressed concrete bonded simply supported beam and slab subjected to fire[J]. Journal of Jilin University(Engineering and Technology Edition) 2009,36(2):125-127.

[2] 赵尚传, 赵国藩. 基于可靠性的在役混凝土结构剩余使用寿命预测[J]. 建筑科学, 2001,17(5):19-22. Zhao Shang-chuan, Zhao Guo-fan. Prediction of remaining service life of existing concrete structures based on reliability[J]. Building Science, 2001,17(5):19-22.

[3] 金伟良,宋志刚, 赵羽习. 工程结构全寿命可靠性与灾害作用下的安全性[J]. 浙江大学学报:工学版, 2006, 40(11): 1862-1868. Jin Wei-liang, Song Zhi-gang, Zhao Yu-xi. Life-cycle reliability of engineering structures and structure safety under hazard events[J]. Journal of Zhejiang University(Engineering Science), 2006, 40(11): 1862-1868.

[4] Kumar S,Rao C V S K.Fire load in residential buildings[J].Building and Environment,1995,30(2):299-305.

[5] GB50068-2001.建筑结构可靠度设计统一标准[S].

[6] Ellingwood B R. Load combination requirements for fire-resistant structural design[J]. Journal of Fire Protection Engineering, 2005,15(1):43-61.

[7] 白丽丽,王振清,韩玉来,等. 高温后RC梁剩余承载力与可靠性分析[J]. 哈尔滨工程大学学报,2007,28(10):1084-1088. Bai Li-li, Wang Zhen-qing, Han Yu-lai, et al. Reliability analysis of residual bear capacity and reliability of RC beam after high temperature[J]. Journal of Harbin Engineer University, 2007,28(10):1084-1088.

[8] Feasey R,Buchanan A.Post-flashover fires for structural design[J].Fire Safety Journal,2002,37(1):83-105.

[9] Ravindra M K,Galambos T V. Load and resistance factor design ofr steel[J]. Journal of the Structural Division 1978,104(9):1337-1353.

[10] Boyd S E,Lesko J J,Case S W. Compression creep rupture behavior of a glass/vinyl ester composite laminate subject to fire loading conditions[J]. Composites Science and Technology,2011,67 (15-16) :3187-3195.
[1] LIU Zhi-feng, ZHAO Dai-hong, WANG Yu-mo, HUN Lian-ming, ZHAO Yong-sheng, DONG Xiang-min. Relationship between bearing capacity of heavy machine hydrostatic rotary table and temperature field distribution of oil pad [J]. 吉林大学学报(工学版), 2018, 48(3): 773-780.
[2] NI Ying-sheng, SUN Qi-xin, MA Ye, XU Dong. Calculation of capacity reinforcement about composite box girder with corrugated steel webs based on tensile stress region theory [J]. 吉林大学学报(工学版), 2018, 48(1): 148-158.
[3] WANG Guo-lin, SUN Yan-tian, LIANG Chen, YANG Jian, ZHOU Hai-chao. Contour design of radial tire based on full stress theory [J]. 吉林大学学报(工学版), 2017, 47(2): 365-372.
[4] SHAO Qing, XU Tao, XU Cong-zhan, GUO Hao-tian, GUO Gui-kai, ZHANG Hai-bo. Simulation of angular contact ball bearing characteristics with PEEK cage [J]. 吉林大学学报(工学版), 2017, 47(1): 163-168.
[5] ZHANG Yan-ling, SUN Tong, HOU Zhong-ming, LI Yun-sheng. Bending-torsion characteristics of steel-concrete curved composite beams stiffened with diaphragms [J]. 吉林大学学报(工学版), 2015, 45(4): 1107-1114.
[6] WANG Chun-gang, ZHANG Zhuang-nan, ZHAO Da-qian, CAO Yu-fei. Experimental investigation of Σ-section channel steel with complex edge stiffeners and web holes under axial compression [J]. 吉林大学学报(工学版), 2015, 45(3): 788-796.
[7] LI Hai-feng,GUO Xiao-nong,LUO Yong-feng,GAO Xuan-neng. Collapse resistance behavior of Ferris wheel with stay cables [J]. 吉林大学学报(工学版), 2015, 45(2): 406-413.
[8] SHI Dong-yong, YING Liang, HU Ping, SHEN Guo-zhe, WU Wen-hua, JIANG Da-xin. Numerical simulation of 3D temperature field in hot forming of high strength steel [J]. 吉林大学学报(工学版), 2014, 44(4): 946-952.
[9] CHEN Yan-hong, WU Wei-jing, LIU Hong-wei, SHEN Shuai, LI Ce-yuan, GENG Huan-liang. Thermal characteristics of battery for pure electric vehicles [J]. 吉林大学学报(工学版), 2014, 44(4): 925-932.
[10] GUO Jun-ping, DENG Zong-cai, LU Hai-bo, LIN Jin-song. Experiment on shear behavior of reinforced concrete beams strengthened with prestressed high strength steel wire mesh [J]. 吉林大学学报(工学版), 2014, 44(4): 968-977.
[11] JIANG Feng-guo, ZHAO Jing-lu, ZHENG Zhong-yuan. Reliability analysis of steel columns exposed to fire by load and resistance factor design [J]. 吉林大学学报(工学版), 2014, 44(4): 978-984.
[12] YUAN Zhe, MA Wen-xing, LIU Chun-bao, LIU Hao. Temperature field analysis of the open-type hydrodynamic retarder of heavy vehicle [J]. 吉林大学学报(工学版), 2013, 43(05): 1271-1275.
[13] MENG Guang-wei, LI Guang-bo, ZHOU Zhen-ping, ZHOU Li-ming. Structure reliability analysis based on Fourier orthogonal neural network response surface method [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 135-138.
[14] KOU Shu-Qing, WANG Jin-Wei, ZHAO Yong, YANG Shen-Hua. Numerical simulation of pulsed laser processing conrod fracture splitting notch [J]. 吉林大学学报(工学版), 2010, 40(05): 1256-1261.
[15] LI Yong-qiang, ZHAO He, ZHAO Xi-hua, ZHANG Wei-hua. Numerical simulation of RSW temperature field during mild steel LB-RSW [J]. 吉林大学学报(工学版), 2010, 40(03): 709-0713.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd