Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (10): 2307-2315.doi: 10.13229/j.cnki.jdxbgxb20210281

Previous Articles     Next Articles

Experiment on friction and wear characteristics between simulated lunar dust and typical metal materials

Meng ZOU1,2(),Zi-qi GUO1,2,Zhen CHEN1,2,Hong-tao CAO1,2,Jian-zhong ZHU1,2,Li-han XU1,2   

  1. 1.College Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China
    2.College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
  • Received:2021-03-22 Online:2022-10-01 Published:2022-11-11

PDF (PC)

344

Abstract:

In order to study the friction and wear characteristics of simulated lunar dust and typical metal materials， three kinds of simulated lunar dust， JLU-D1， JLU-D2 and JLU-D3， were prepared from volcanic ash in Jinchuan Town， Huinan County， Jilin Province. Three metals， stainless steel， aluminum alloy and copper alloy， were selected as the samples to be worn. The friction and wear tests were carried out using the UMT tester. The wear morphology， friction coefficient， wear scar depth and wear amount of the three materials after simulated lunar dust friction were analyzed. The results show that the maximum wear depth difference of aluminum alloy， copper alloy， and stainless steel is 74.05 μm， 27.73 μm， and 15.25 μm， respectively. The friction coefficients of aluminum alloy， copper alloy， and stainless steel are （0.2262~0.2835）， （0.1545~0.1855）， and （0.4198~0.4958）， respectively. The wear of aluminum alloy， copper alloy， and stainless steel increases by 50%， 28.6%， and 97%， respectively. The results show that aluminum alloy， copper alloy， and stainless steel are the most severely worn materials by lunar dust. The initial friction coefficient has no obvious correlation with the strength and hardness of metal materials. The friction coefficient of stainless steel is the largest， and that of aluminum is greater than that of copper. The friction and wear of small particle size lunar dust on the typical metal surface is more serious than that of large particle size lunar dust.

Key words: simulated lunar dust, frictional wear, wear mechanism, bionic design

CLC Number: 

  • V11
1 Tang H, Li X Y, Zhang S S, et al. A lunar dust simulant: CLDS-i[J]. Advances in Space Research, 2017, 59(4): 1156-1160.
2 Hyatt M, Greenberg P, Pines V, et al. Lunar and Martian dust: evaluation and mitigation[C]∥Aiaa Aerospace Sciences Meeting & Exhibit, Reno, Nevada, 2007.
3 Calle C I, Buhler C R, Johansen M R, et al. Active dust control and mitigation technology for lunar and Martian exploration[J]. Acta Astronautica, 2011, 69 (11/12): 1082-1088.
4 Afshar-Mohajer N, Wu C-Y, Curtis J S, et al. Review of dust transport and mitigation technologies in lunar and Martian atmospheres[J]. Advances in Space Research, 2015, 56(6): 1222-1241.
5 李蔓, 童靖宇, 沈志刚, 等. 模拟月尘制备及其物理和力学性质研究[J]. 航天器环境工程, 2012, 29(5): 532-535.
Li Man, Tong Jing-yu, Shen Zhi-gang, et al. Preparation and physical and mechanical properties of simulated lunar dust[J]. Spacecraft Environmental Engineering,2012, 29(5): 532-535.
6 白羽, 郝宁, 王志浩, 等. 模拟月尘对巡视器车轮轮轴材料的磨损试验研究[J]. 航天器环境工程, 2013, 30(5): 493-498.
Bai Yu, Hao Ning, Wang Zhi-hao, et al. Experimental study on wear of lunar dust on rover-wheel shaft materials[J]. Spacecraft Environmental Engineering, 2013, 30(5): 493-498.
7 Sandra Wagner. The apollo expericence lessons learned for constellation lunar dust management[R]. NASA TP-213726,2006.
8 赵伟国, 韩向东, 李仁年, 等. 沙粒粒径与含沙量对离心泵空化特性的影响[J]. 农业工程学报, 2017, 33(4): 117-124.
Zhao Wei-guo, Han Xiang-dong, Li Ren-nian, et al. Effect of sand particle size and sediment concentration on cavitation characteristics of centrifugal pump[J]. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(4): 117-124.
9 杨作梅, 郭玉明, 崔清亮, 等. 谷子摩擦特性试验及其影响因素分析[J]. 农业工程学报, 2016, 32(16): 258-264.
Yang Zuo-mei, Guo Yu-ming, Cui Qing-liang, et al. Experimental study on friction characteristics of millet and its influencing factors[J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(16): 258-264.
10 王蜜, 李致远, 樊文选, 等. 软硬相间层状仿生材料摩擦因数影响因素[J].吉林大学学报: 工学版, 2019, 49(5): 1630-1635.
Wang Mi, Li Zhi-yuan, Fan Wen-xuan, et al. Influence factors of friction coefficient of soft and hard layered biomimetic materials[J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(5): 1630-1635.
11 卢金玲, 张欣, 王维, 等. 沙粒粒径对水力机械材料磨蚀性能的影响[J]. 农业工程学报, 2018, 34 (22): 53-60.
Lu Jin-ling, Zhang Xin, Wang Wei, et al. Effect of sand particle size on the abrasion properties of hydromechanical materials[J]. Transactions of the Chinese Society of Agricultural Engineering,2018, 34(22): 53-60.
12 姜继海, 赵存然, 张冠隆, 等. 航空煤油柱塞泵摩擦副涂层材料摩擦性能[J]. 吉林大学学报: 工学版, 2021, 51(1): 147-153.
Jiang Ji-hai, Zhao Cun-ran, Zhang Guan-long, et al. Friction properties of coating materials for aviation kerosene piston pump[J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 147-153.
13 Yu H, Deng H, Huang W, et al. The effect of dimple shapes on friction of parallel surfaces[J]. Proceedings of the Institution of Mechanical Engineers Part J——Journal of Engineering Tribology, 2011, 225(8): 693-703.
14 Wang X, Horanyi M, Robertson S. Experiments on dust transport in plasma to investigate the origin of the lunar horizon glow[J]. Journal of Geophysical Research-Space Physics, 2009, 114(A5):No103.
15 Wakuda M, Yamauchi Y, Kanzaki S, et al. Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact[J]. Wear, 2003, 254(3/4): 356-363.
16 Tian D B, Li M, Bai Y, et al. Abrasion research on axle materials with the influence of simulated lunar dust[J]. Protection of Materials and Structures from the Space Environment, 2017,47: 257-264.
17 Sumer B. Influence of preload control on friction force measurement of fabric samples[J]. Tribology International, 2018, 127: 446-456.
18 So H, Yu D S, Chuang C Y. Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel[J]. Wear, 2002, 253(9/10): 1004-1015.
19 Shivamurthy R C, Surappa M K. Tribological characteristics of A356 Al alloy-SiCP composite discs[J]. Wear, 2011, 271(9): 1946-1950.
20 Ramkumar S S, Umrani A S, Shelly D C, et al. Study of the effect of sliding velocity on the frictional properties of nonwoven fabric substrates[J]. Wear, 2004, 256(3/4): 221-225.
[1] Ji-hai JIANG,Cun-ran ZHAO,Guan-long ZHANG,Ming-yang CHE. Tribological properties of coating materials of tribopairs for aviation kerosene piston pump [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 147-153.
[2] Xiao-hui WENG,You-hong SUN,Shu-jun ZHANG,Jun XIE,Zhi-yong CHANG. Oil and gas detection method and experimental new technology based on bionic nasal chamber optimization [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(1): 382-388.
[3] QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[4] CHEN Dong-hui, LIU Wei, LYU Jian-hua, CHANG Zhi-yong, WU Ting, MU Hai-feng. Bionic design of corn stubble collector based on surface structure of Patinopecten yessoensis [J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[5] CHEN Hua, LI Ru-Ying, ZHANG Chi, LIU Yong, CAO Zhan-Yi. Effects of addition of ultrafine CrFe powder on tribological behavior of sintered steel [J]. 吉林大学学报(工学版), 2009, 39(05): 1162-1166.
[6] Meng Fan-zhong，Zhang Jin-ping，Xu Shu-xin . Engine assembly test and wear characteristics of automotive chain [J]. 吉林大学学报(工学版), 2008, 38(增刊): 99-0102.
[7] Yang Xiao-hong, Liu Yong-bing, Zhang Ming-zhe, Zhou Hong1, Liang Tao, Wang Jun . The influences of ironriched phases on the flank wear of HSS tools under the condition of drilling diecast aluminum alloy [J]. 吉林大学学报(工学版), 2006, 36(增刊2): 6-10.
[8] HUANG Shu-tao, YU Jun-yi, JIANG Zeng-hui, JIA Chun-de. Study on Wear Mechanism of Ceramal Tool in High-Speed Wet Turn-Milling D60 Steel [J]. 吉林大学学报(工学版), 2001, (1): 6-9.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd