吉林大学学报(工学版) ›› 2002, Vol. ›› Issue (4): 31-35.
Previous Articles Next Articles
CHENG Wan-jun1, HUANG Liang-ju2, LIU Hua-min2
CLC Number:
[1] 山本明,杨国彬.日本闭式模锻技术的发展[J].汽车工艺与材料,1995(11):1~4. [2] 崔忠圻.金属学及热处理[M].北京:机械工业出版社,1988. |
[1] | GUAN Qing-feng, DONG Shu-heng, ZHENG Huan-huan, LI Chen, ZHANG Cong-lin, LV-Peng. Cr surface alloying of 45# steel by high-current pulsed electron beam treatment [J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168. |
[2] | LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
[3] | GUAN Qing-feng, ZHANG Yuan-wang, SUN Xiao, ZHANG Chao-ren, LYU Peng, ZHANG Cong-lin. Surface alloying of Al-W alloy by high current pulsed electron beam treatment [J]. 吉林大学学报(工学版), 2017, 47(4): 1171-1178. |
[4] | XU Hong, LIU Ya-nan, YU Ting, GU Zheng-wei, LI Xiang-ji, ZHANG Zhi-qiang. Inelastic recovery behavior and microscopic mechanism of high strength DP780 steel during cyclic loading-unloading [J]. 吉林大学学报(工学版), 2017, 47(1): 191-198. |
[5] | HU Ping, ZHANG Jin-nyu, SHEN Guo-zhe, LIN Fa-cai, LIU Li-zhong. Influence of stress state on the hardness distribution of S-rail in tailored die quenching process [J]. 吉林大学学报(工学版), 2016, 46(2): 500-504. |
[6] | GUAN Qing-feng, LI Yan, HOU Xiu-li, YANG Sheng-zhi, WANG Xiao-tong. Modification of solid solution Mg-Gd-Y-Nd alloy irradiated by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205. |
[7] | YING Liang, DAI Ming-hua, HU Ping, FAN Zheng-shuai, SHEN Guo-zhe, SHI Dong-yong. Strength and hardness prediction based on cooling rate for hot forming high strength steel [J]. 吉林大学学报(工学版), 2014, 44(6): 1716-1722. |
[8] | ZHAO Hong-wei, GUO Wen-chao, ZHANG Lin, WANG Xiao-jun. Quasicontinuum simulation of nanometric cutting of single crystal copper [J]. 吉林大学学报(工学版), 2013, 43(02): 352-357. |
[9] | GU Zheng-wei, YU Si-bin, HAN Li-jun, MENG Jia, SHEN Yong-bo, XU Hong. Effect of welding speed on microstructure and micro hardness of the weld seam of laser welded ultra-high strength steel [J]. , 2012, (03): 656-659. |
[10] | MIAO Hong, ZUO Dun-wen, WANG Min, ZHANG Rui-hong, WANG Hong-feng. Effect of technological parameters on quality of Q460 high-strength-steel internal thread formed by cold extrusion [J]. 吉林大学学报(工学版), 2012, 42(01): 68-73. |
[11] | ZHOU Xiao-qin, ZHU Zhi-wei, LUO Dan, ZHAO Shao-xin, ZHAO Xiao-dong. Influence of linearly varying cutting depth on nanocutting of monocrystalline copper [J]. 吉林大学学报(工学版), 2012, 42(01): 109-115. |
[12] | KONG De-jun, ZHOU Chao-zheng, HU Ai-ping. Effect of laser shock on the mechanical properties of weld joint of X70 steel pipeline [J]. 吉林大学学报(工学版), 2011, 41(05): 1507-1512. |
[13] | XU Guo-Cheng, XU De-Sheng, ZHAO Xi-Hua, BAI Da-Cheng, CHEN Jian-He. Structure of spring steel spot welded joint and prediction for joint hardness [J]. 吉林大学学报(工学版), 2011, 41(02): 377-0381. |
[14] | LUO Kai-Yu, LU Jin-Zhong, YIN Chun-Jing, ZHONG Jun-Wei, YAO Hui-Xue, ZHANG Yong-Kang. Properties of LY2 alloy film by laser shock processing [J]. 吉林大学学报(工学版), 2010, 40(02): 467-0470. |
[15] | YAO Guo-feng,DING Yan-xia,WANG Min . Effect of interface topography on residual stress [J]. 吉林大学学报(工学版), 2009, 39(03): 704-0707. |
|