吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (4): 1171-1178.doi: 10.13229/j.cnki.jdxbgxb201704023

• Orginal Article • Previous Articles     Next Articles

Surface alloying of Al-W alloy by high current pulsed electron beam treatment

GUAN Qing-feng1, ZHANG Yuan-wang1, SUN Xiao2, ZHANG Chao-ren2, LYU Peng1, ZHANG Cong-lin1   

  1. 1.College of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China;
    2.College of Jingjiang, Jiangsu University, Zhenjiang 212013, China
  • Received:2016-05-17 Online:2017-07-20 Published:2017-07-20

RICH HTML

0   

PDF (PC)

181

Abstract: Fine W powder layer was pre-coated on the surface of Al substrate, then the surface was treated by High Current Pulsed Electron Beam (HCPEB) to obtain Al-W alloy. The microstructure of the alloy layer was analyzed in detail using X-ray diffraction (XRD), Optical Microscope (OM), Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM). Experiment results show that the alloyed surface layer was formed with HCPEB irradiation. The alloyed layer is mainly composed of melting layer and solid diffusion layer with thickness about 15μm. The main phases of the alloyed layer are W and Al-W intermetallic compound. The surface hardness of the HCPEB treated samples was significantly improved. In addition, the electrochemical experiments show much better corrosion resistance of surface alloyed samples.

Key words: metallic material, high current pulsed electron beam(HCPEB), pure aluminum, alloying, hardness, corrosion resistance

CLC Number: 

  • TG174.445
[1] Trueba M, Trasatti S P. Study of Al alloy corrosion in neutral NaCl by the pitting scan technique[J]. Materials Chemistry and Physics, 2010, 121(3): 523-533.
[2] Scully J R, Gebert A, Payer J H. Corrosion and related mechanical properties of bulk metallic glasses[J]. Journal of Materials Research, 2007,22(2): 302-313.
[3] Merl D K, Panjan P, Cekada M, et al. The corrosion behavior of Cr-(C, N)PVD hard coatings deposited on various substrates[J]. Electrochim Acta, 2004, 49(9):1527-1533.
[4] Hao Y, Gao B, Tu G F, et al. Effect of HCPEB treatment on microstructure and microhardness of hypereutectic Al-20Si alloy[J]. Trans Mater Heat Treat, 2010, 31(9): 142-145.
[5] 韩丹. 强流脉冲电子束 40CrNiMo7 钢表面改性实验研究[D]. 大连:大连理工大学材料科学与工程学院,2013.
Han Dan. Experimental study on surface modification of 40CrNiMo7 steel by high current pulsed electron beam[D]. Dalian: School of Materials Science and Engineering,Dalian University of Technology, 2013.
[6] 欧阳义芳, 钟夏平. Al-W 二元合金机械合金化扩展固溶度研究[J]. 中国科学: A 辑, 2000, 30(1): 49-53.
Ouyang Yi-fang, Zhong Xia-ping. Al-W binary alloy by mechanical alloying expansion solid solubility studies[J]. Science in China: A Series, 2000, 30(1): 49-53.
[7] 王倩倩, 王强, 张治民, 等. 铝钨粉末合金挤压成形工艺研究[J]. 热加工工艺, 2014, 43(21): 1-4.
Wang Qian-qian, Wang Qiang, Zhang Zhi-min, et al. Research on extrusion forming process of aluminum tungsten powder alloy[J]. Hot Working Technology, 2014, 43(21): 1-4.
[8] 关庆丰, 安春香, 秦颖, 等. 强流脉冲电子束应力诱发的微观结构[J]. 物理学报, 2005, 54(8): 3927-3934.
Guan Qing-feng, An Chun-xiang, Qin Ying, et al. Microstructure of stress induced by intense pulsed electron beam[J]. Journal of Physics, 2005, 54(8): 3927-3934.
[9] 邱冬华, 程笃庆, 关庆丰, 等. 强流脉冲电子束作用下纯镍表面的应力特征[J]. 高压物理学报, 2009, 23(5): 321-326.
Qiu Dong-hua, Cheng Du-qing, Guan Qing-feng, et al. Stress characteristics of pure nickel under the action of intense pulsed electron beam[J]. Chinese Journal of High Pressure Physics, 2009, 23(5): 321-326.
[10] 王晓彤, 彭冬晋, 邹阳, 等. 表面状态对强流脉冲电子束辐照诱发金属表面熔坑的影响[J]. 高压物理学报, 2012, 27(1): 99-104.
Wang Xiao-tong, Peng Dong-jin, Zou Yang, et al. The effect of surface state on the metal surface melting induced by intense pulsed electron beam irradiation[J]. Chinese Journal of High Pressure Physics,2012,27(1):99-104.
[11] 郝胜智. 纯 Al 材强流脉冲电子束表面改性的研究[D]. 大连:大连理工大学材料科学与工程学院,2000.
Hao Sheng-zhi. Study on the surface modification of pure Al material with high current pulsed electron beam[D]. Dalian:School of Materials Science and Engineering,Dalian University of Technology, 2000.
[12] Shaw B A, Davis G D, Fritz T L, et al. The influence of tungsten alloying additions on the passivity of aluminium[J]. ChemInform, 1991, 138(11):3288-3295.
[13] Principe E L, Shaw B A, Davis G D. Role of oxide/metal interface in corrosion resistance: Al-W and AlMo systems[J]. Corrosion-Houston Tx-, 2003, 59(4):295-313.
[1] GUAN Qing-feng,ZHANG Fu-tao,PENG Tao,LYU Peng,LI Yao-jun,XU Liang,DING Zuo-jun. Hot deformation behavior of 9%Cr steel contained B and Co elements [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1799-1805.
[2] GUAN Qing-feng, DONG Shu-heng, ZHENG Huan-huan, LI Chen, ZHANG Cong-lin, LV-Peng. Cr surface alloying of 45# steel by high-current pulsed electron beam treatment [J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168.
[3] ZHAO Yu-guang, YANG Xue-hui, XU Xiao-feng, ZHANG Yang-yang, NING Yu-heng. Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy [J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[4] TANG Hua-guo, MA Xian-feng, ZHAO Wei, LIU Jian-wei, ZHAO Zhen-ye. Synthesis microstructure and thermal properties of high performance bulk Al [J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547.
[5] YANG Xiao-hong, HANG Wen-xian, QIN Shao-gang, LIU Yong-bing, LIU Li-ping. Microstructure and wear properties of Co-based composite coatings on H13 steel surface by laser cladding [J]. 吉林大学学报(工学版), 2017, 47(3): 891-899.
[6] GUAN Qing-feng, HUANG Wei, LI Huai-fu, GONG Xiao-hua, ZHANG Cong-lin, LYU Peng. Diffusion alloying of Cu-C induced by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973.
[7] ZHANG Xue-guang, LIU Chun-guo, ZHENG Yuan, JIANG Zhong-hai, LI Xiang-ji. Forming limit prediction of aluminum alloy based on ductile damage and shear damage [J]. 吉林大学学报(工学版), 2016, 46(5): 1558-1566.
[8] LIU Xiao-bo, ZHOU De-kun, ZHAO Yu-guang. Microstructure and mechanical property of Mg2Si/Al composites fabricated by semi-solid extrusion under different isothermal heat treatments [J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[9] HU Ping, ZHANG Jin-nyu, SHEN Guo-zhe, LIN Fa-cai, LIU Li-zhong. Influence of stress state on the hardness distribution of S-rail in tailored die quenching process [J]. 吉林大学学报(工学版), 2016, 46(2): 500-504.
[10] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds [J]. 吉林大学学报(工学版), 2016, 46(2): 511-515.
[11] LI Chun-ling, FAN Ding, WANG Bin, YU Shu-rong. 5A06 aluminum alloy and galvanized steel butt welding-brazing by laser with preset filler powder [J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[12] ZHANG Jia-tao, ZHAO Yu-guang, TAN Juan. Effect of starting microstructure on refining potency of electro-pulsing on reverse austenite grain [J]. 吉林大学学报(工学版), 2016, 46(1): 193-198.
[13] GUAN Qing-feng, LI Yan, HOU Xiu-li, YANG Sheng-zhi, WANG Xiao-tong. Modification of solid solution Mg-Gd-Y-Nd alloy irradiated by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205.
[14] MA Yun-hai, SHANG Wen-bo, FAN Xue-ying, GAO Zhi-hui, TONG Jin, YAN Zhi-feng, CHANG Zhi-yong. Preparation and degradation of porous β-tricalcium phosphate bioceramic for bone imitaion [J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374.
[15] DUAN Xing-wang,LIU Jian-sheng. Plasticity at elevated temperature and fracture character of 316LN steel [J]. 吉林大学学报(工学版), 2015, 45(2): 494-500.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd