吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (4): 1200-1205.doi: 10.13229/j.cnki.jdxbgxb201504026

Previous Articles     Next Articles

Modification of solid solution Mg-Gd-Y-Nd alloy irradiated by high current pulsed electron beam

GUAN Qing-feng, LI Yan, HOU Xiu-li, YANG Sheng-zhi, WANG Xiao-tong   

  1. College of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China
  • Received:2014-02-27 Online:2015-07-01 Published:2015-07-01

RICH HTML

0   

PDF (PC)

190

Abstract: High-Current Pulsed Electron Beam (HCPEB) was employed for the surface irradiation of solid solution Mg-Gd-Y-Nd alloy. The microstructures of the specimens before and after the irradiation were characterized in detail using X-Ray Diffraction (XRD), Optimal Microscopy (OM) and Scanning Electron Microscopy (SEM). The microhardness and corrosion resistance of the irradiated samples were also examined. The experiment results indicate that the sample surface was remelted after HCPEB irradiation. The electrochemical corrosion resistance of the irradiated surfaces was improved obviously. Grain refinement on the surface, the formation of remelting layer and the solid solution strengthening effect of rare earth elements are believed to be the dominating reasons for the improvement of the hardness and corrosion resistance performance.

Key words: metallic materials, high-current pulsed electron beam (HCPEB), Mg-Gd-Y-Nd alloy, surface microstructure, microhardness, corrosion resistance

CLC Number: 

  • TG113.2
[1] 陈振华, 严红革, 陈吉华. 镁合金[M]. 北京:化学工业出版社, 2004.
[2] 吕晓霞, 苏振国, 陆有, 等. 经激光表面熔凝处理的Mg-11Y-2.5Zn合金的显微组织和摩擦学性能[J]. 吉林大学学报:工学版,2010,40(5):1250-1255. Lv Xiao-xia, Su Zhen-guo, Lu You, et al. Microstructure and tribological properties of Mg-11Y-2.5Zn alloy modified by laser surface melting-solidification[J]. Journal of Jilin University (Engineering and Technology Edition), 2010, 40(5): 1250-1255.
[3] Guo Guang-wei, Tang Guang-ze, Ma Xin-xin, et al. Effect of high current pulsed electron beam irradiation on wear and corrosion resistance of Ti6Al4V[J]. Surface & Coatings Technology, 2013, 229:140-145.
[4] Hao Sheng-zhi, Gao Bo, Wu Ai-min, et al. Surface modification of steels and magnesium alloy by high current pulsed electron beam[J]. Nuclear Instruments & Methods in Physics Research Section B, 2005, 240(3): 646-652.
[5] Li Min-cai, Hao Sheng-zhi, Dong Chuang. Improved wear resistance of magnesium alloys AZ91 by high current pulsed electron beam treatment[J]. Transactions of the Indian Institute of Metal, 2009, 62(4-5): 485-487.
[6] Hehmann F, Sommer F, Predel B. Extension of solid solubility in magnesium by rapid Solidification[J]. Materials Science and Engineering A, 1990, 125(2): 249-265.
[7] Zhang K M, Yang D Z, Zou J X, et al. Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment[J]. Surface & Coatings Technology,2006,201(6): 3096-3102.
[8] 邹慧,关庆丰,张庆瑜. 利用强流脉冲电子束对45#钢进行表面改性[J]. 吉林大学学报:工学版, 2004, 34(1): 127-131. Zou Hui, Guan Qing-feng, Zhang Qing-yu. Surface modification of 45# steel by high- current pulsed electron beam[J]. Journal of Jilin University (Engineering and Technology Edition), 2004, 34(1):127-131.
[9] 秦颖, 王晓钢, 董闯,等. 强流脉冲电子束诱发温度场及表面熔坑的形成[J]. 物理学报, 2003,52(12): 3043-3048. Qin Ying, Wang Xiao-gang, Dong Chuang,et al. Temperature field and formation of crater on the surface induced by high current pulsed electron beam bombardment[J]. Acta Physica Sinica, 2003, 52(12):3043-3048.
[10] 关庆丰,邹阳,张在强,等. 强流脉冲电子束作用下纯铜的微观结构与性能[J]. 吉林大学学报:工学版, 2012, 43(4):965-969. Guan Qing-feng, Zou Yang, Zhang Zai-qiang, et al. Microstructures and corrosion property of pure copper under high-current pulsed electron beam irradiation[J]. Journal of Jilin University (Engineering and Technology Edition), 2012,43(4): 965-969.
[11] Baril G,Blanc C.Impedance spectroscopy in characterizing time-dependent corrosion of AZ91 and AM50 magnesium alloys characterization with respect to their microstructures[J].Jourmal of the Electrochemical Society,2001,148:489-496.
[12] Zou J X,Zhang K M,Hao S Z. Mechanisms of hardening,wear and corrosion improvement of 316L stainless steel by low energy high current pulsed electron beam surface treatment[J]. Thin Solid Films, 2010, 519(4):1404-1415.
[1] GUAN Qing-feng, DONG Shu-heng, ZHENG Huan-huan, LI Chen, ZHANG Cong-lin, LV-Peng. Cr surface alloying of 45# steel by high-current pulsed electron beam treatment [J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168.
[2] ZHAO Yu-guang, YANG Xue-hui, XU Xiao-feng, ZHANG Yang-yang, NING Yu-heng. Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy [J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[3] TANG Hua-guo, MA Xian-feng, ZHAO Wei, LIU Jian-wei, ZHAO Zhen-ye. Synthesis microstructure and thermal properties of high performance bulk Al [J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547.
[4] GUAN Qing-feng, ZHANG Yuan-wang, SUN Xiao, ZHANG Chao-ren, LYU Peng, ZHANG Cong-lin. Surface alloying of Al-W alloy by high current pulsed electron beam treatment [J]. 吉林大学学报(工学版), 2017, 47(4): 1171-1178.
[5] LIU Xiao-bo, ZHOU De-kun, ZHAO Yu-guang. Microstructure and mechanical property of Mg2Si/Al composites fabricated by semi-solid extrusion under different isothermal heat treatments [J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[6] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds [J]. 吉林大学学报(工学版), 2016, 46(2): 511-515.
[7] LI Chun-ling, FAN Ding, WANG Bin, YU Shu-rong. 5A06 aluminum alloy and galvanized steel butt welding-brazing by laser with preset filler powder [J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[8] ZHANG Jia-tao, ZHAO Yu-guang, TAN Juan. Effect of starting microstructure on refining potency of electro-pulsing on reverse austenite grain [J]. 吉林大学学报(工学版), 2016, 46(1): 193-198.
[9] MA Yun-hai, SHANG Wen-bo, FAN Xue-ying, GAO Zhi-hui, TONG Jin, YAN Zhi-feng, CHANG Zhi-yong. Preparation and degradation of porous β-tricalcium phosphate bioceramic for bone imitaion [J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374.
[10] GAO Song, LIANG Ji-cai, CHEN Guang-yi, WEI Zhi-yong, TENG Fei. Rapid adjusting of fundamental units in process of flexible 3D stretch-bending [J]. 吉林大学学报(工学版), 2014, 44(6): 1723-1728.
[11] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel [J]. 吉林大学学报(工学版), 2014, 44(4): 1037-1041.
[12] GUAN Qing-feng,JI Le,CAI Jie,YANG Sheng-zhi,LIU Shi-chao,ZHANG Zai-qiang,HOU Xiu-li. Surface microstructure and properties of 3Cr13 martensitic stainless steel after high current pulsed electron beam bombardment [J]. 吉林大学学报(工学版), 2014, 44(3): 712-717.
[13] LI Xin,WANG Gang,LU Guan-han,GU Zheng-wei,XU Hong. Weldability of 22MnB5 after hot stamping by TIG welding processes [J]. 吉林大学学报(工学版), 2014, 44(3): 708-711.
[14] CHANG Ying, LI Ye, YING Liang, LU Jin-dong, TANG Xing-hui, GUO Wei. Effect of oxidation behavior on heat transfer dynamics performance of hot stamping steel [J]. 吉林大学学报(工学版), 2013, 43(06): 1551-1557.
[15] WANG Yun, LIU Cai, MA Li-dong, WANG Yu-feng, HUANG Qing-xue. Analysis of interval between guides during two-roll straightening process [J]. 吉林大学学报(工学版), 2013, 43(03): 677-681.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd