吉林大学学报(工学版) ›› 2003, Vol. ›› Issue (3): 9-13.
Previous Articles Next Articles
CUI Zhan-rong, LI Jian-qiao, LI Yin-wu, REN Lu-quan
CLC Number:
[1] 李龙成.推土铲铲壁设计参数的研究[J].农业机械学报,1979,10(4):85-96. [2] 任露泉,陈德兴,陈秉聪.土壤粘附概述[J].农业工程学报,1990,6(1):85-96. [3] 尚涛,王昕,李建桥.开发减粘降阻仿生钻具的可行性[J].吉林大学学报(工学版),2002,32(3):101-104. [4] 李因武,李建桥,韩志武,等.履带式推土机杆件及分析系统[A].第五届全国计算机应用联合学术会议论文集[C],1999(2):193-196. |
[1] | YUAN Zhe, XU Dong, LIU Chun-bao, LI Xue-song, LI Shi-chao. Strength analysis of hydraulic retarder blade based on the process of thermal-fluid structure interaction [J]. 吉林大学学报(工学版), 2016, 46(5): 1506-1512. |
[2] | YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148. |
[3] | TIAN Wei-jun, WANG Ji-yue1, LI Ming1, CHEN Si-yuan, LIU Fang-yuan, CONG Qian. Bionic design of the small blade of horizontal axis wind turbines [J]. 吉林大学学报(工学版), 2015, 45(5): 1495-1501. |
[4] | GU Tian-qi, ZHANG Lei, JI Shi-jun, TAN Xiao-dan, HU Ming. Curve fitting method for closed discrete points [J]. 吉林大学学报(工学版), 2015, 45(2): 437-441. |
[5] | TAN Yue, MA Wen-xing, LIU Chun-bao. Precision control on blades forming of stamping welded hydrodynamic torque converter [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 530-534. |
[6] | LIU Shu-cheng, WEI Wei, YAN Qing-dong, ZHOU Qia. Simulation method of idling characteristic of hydrodynamic torque converter stator wheel [J]. 吉林大学学报(工学版), 2013, 43(01): 22-27. |
[7] | WANG Zeng-hui, HUANG Dong-yan, LI Zhuo-shi, JIA Hong-lei, WAN Bao-cheng. Universal the blade the broken stubble power consumption influence of the working parameters of the rotary tiller broken stubble [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 122-125. |
[8] | LIAO Geng-hua, HU Qin-chao, YANG Ying, HAN Zhi-wu, REN Lu-quan, LIU Qing-ping. Bionic design and experimental research on blade of small axial fan based on characteristics of wings of typical birds [J]. , 2012, 42(05): 1163-1167. |
[9] | LIAO Geng-hua, LIU Qing-ping, CHEN Kun, YANG Ying, HAN Zhi-wu, REN Lu-quan. Parameterized modeling of bionic blade of axial fan based on CATIA [J]. 吉林大学学报(工学版), 2012, 42(02): 403-406. |
[10] | JIANG Mai, CAI Cheng-tao, DENG Chao, ZHU Qi-dan. Design and implement of helicopter blade pyramid angle measurement based on panoramic vision technology [J]. 吉林大学学报(工学版), 2012, 42(01): 193-198. |
[11] | ZHAO Yang, ZHAO Ji, ZHANG Lei, JI Li-Zhe. Robotic blade grinding based on reverse engineering [J]. 吉林大学学报(工学版), 2009, 39(05): 1176-1180. |
[12] | Li Jian-qiao;Wen Li-ge;Zhang Xiu-zhi;Tan Li . Parameterized design method for blade to chop stubble based on UG [J]. 吉林大学学报(工学版), 2008, 38(03): 595-0598. |
[13] | Li Qing-hua,Tan Qing-chang,Pei Yong-chen,Wu Li . Finite element analysis of lateral vibration of high-speed rotating disk cutter slice blade [J]. 吉林大学学报(工学版), 2007, 37(04): 814-818. |
[14] | Wang Jian, Ge An-lin,Lei Yu-long,Tian Hua . Three-dimensional design for hydraulic torque converter blades and its performance analysis [J]. 吉林大学学报(工学版), 2007, 37(01): 43-47. |
[15] | DENG Shiqiao, REN Luquan, HAN Zhiwu. Formation of capillary negative air pressure on interface of soil-moldboard and its function [J]. 吉林大学学报(工学版), 2004, (3): 517-520. |
|