吉林大学学报(工学版) ›› 2004, Vol. ›› Issue (1): 97-101.
Previous Articles Next Articles
LIANG Ji-cai, LI Yi, HUANG Liang-ju, FU Pei-fu, LIU Hua-min
CLC Number:
[1] KIM Hyunkee,YAGI Tetsuji,YAMANAKA Masahito.FE simulation as a must tool in cold/warm forging process and tool design[J].J Mater Proc Tech,2000,98:143-149. [2] 夏巨湛.闭式模锻[M].北京:机械工业出版社,1993. [3] 洪深泽.挤压工艺及模具设计[M].北京:机械工业出版社,1995. [4] 梁继才.轿车等速万向节星形套闭塞模锻关键技术研究[D].长春:吉林大学辊锻工艺研究所,2001. [5] 范鸣玉.最优的技术基础[M].北京:清华大学出版社,1982. [6] 朱伟成.汽车零件精密锻造技术[M].北京:北京理工大学出版社,1999. [7] 梁继才,付沛福,黄良驹,李义.闭塞横锻液压模架的研制[J].吉林工业大学自然科学学报,2001(2):17-21. [8] 梁继才,李义,黄良驹,付沛福.闭式模锻液压模架液压缸的优化设计研究[J].机构强度,2002(3):377-379. |
[1] | GUAN Qing-feng,ZHANG Fu-tao,PENG Tao,LYU Peng,LI Yao-jun,XU Liang,DING Zuo-jun. Hot deformation behavior of 9%Cr steel contained B and Co elements [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1799-1805. |
[2] | MAO Yu-ze, WANG Li-qin. Influence of squirrel-cage flexible support on the dynamic performance of ball bearing [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1508-1514. |
[3] | HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530. |
[4] | LIU Yao-hui, CHEN Qiao-xu, SONG Yu-lai, SHEN Yan-dong. Compressive behavior and mechanism of volcanic ash-SBS, rubber powder-SBS and SBS modified asphalt [J]. 吉林大学学报(工学版), 2017, 47(6): 1861-1867. |
[5] | LIU Yu, LI Peng-fei, ZHANG Yi-min. Analysis and prediction of micro milling deformation of copper thin-wall parts [J]. 吉林大学学报(工学版), 2017, 47(3): 844-849. |
[6] | LUN Feng-yan, FU Wen-zhi, LI Ming-zhe, YI Zhuo, WANG Xin-tong, CHEN Xue. Forming of flexible rolling of three-dimensional surface based on bended rolls [J]. 吉林大学学报(工学版), 2017, 47(3): 876-883. |
[7] | LANG Li-hui, WANG Yao, LI Kui, SUN Zhi-ying, ZHANG Quan-da. Factors influencing inverse bulging effect in sheet hydroforming [J]. 吉林大学学报(工学版), 2016, 46(5): 1567-1576. |
[8] | GU Zheng-wei, LYU Meng-meng, LI Xin, XU Hong. Influence factors of profile deformation in NC stretch bending [J]. 吉林大学学报(工学版), 2016, 46(4): 1190-1196. |
[9] | ZOU Meng, YU Yong-jun, ZHANG Rong-rong, WEI Can-gang, WANG Hui-xia. Simulation analysis of energy-absorption properties of thin-wall tube based on horn structure [J]. 吉林大学学报(工学版), 2015, 45(6): 1863-1868. |
[10] | YU Xiao-dong,FU Xu,LIU Dan,ZHOU Qi-hui,LI Huan-huan,WANG Zhi-qiang. Thermal deformation of annular recess multi-pad hydrostatic thrust bearing [J]. 吉林大学学报(工学版), 2015, 45(2): 460-465. |
[11] | ZHU Xiao-lin, YU Ming, GAO Qing, WANG You-tang. Pipe-soil gap induced by thermal deformation of ground heat exchange pipe [J]. 吉林大学学报(工学版), 2014, 44(4): 998-1003. |
[12] | YANG Zhao-jun,WANG Ji-li,LI Guo-fa,ZHANG Xin-ge. Reliability growth prediction based on fuzzy analytical hierarchy process for punching machines [J]. 吉林大学学报(工学版), 2014, 44(3): 686-691. |
[13] | LYU Meng-ya, HAN Yu-fang, TANG Yong. Correlation technology of suturing procedure in virtual surgery [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 16-20. |
[14] | QIAN Fang-ming, LIU Wei, HUANG Yan. Principle and application of inSAR two tracks differential method [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 92-95. |
[15] | LI Zhi-jie, PENG Yan, LIU Hong-min, WANG Su-fen, XIAO Li-zi. Flow stress of medium carbon steel under warm compression deformation [J]. 吉林大学学报(工学版), 2013, 43(05): 1320-1324. |
|