吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (增刊1): 543-546.

Previous Articles     Next Articles

Numerical simulation on contact problem of ring model with bionic concave morphology

DONG Li-chun1, HAN Zhi-wu2, ZHANG Lei1, NIU Shi-chao2, MA Rong-feng2, REN Lu-quan2   

  1. 1. College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China;
    2. Key Laboratory of Bionic Engineering, Jilin University, Ministry of Education, Changchun 130022, China
  • Received:2012-04-20 Published:2013-06-01

PDF (PC)

604

Abstract:

The modeling of ring model was designed by ANSYS, contact problem of gear pair was made to contact problem of ring model. According to finite element analysis method of contact problems in ANSYS and optimal design technology of bionic surface morphology, nine bionic concave surface micro-morphology have been designed on contact area of the ring model, three-dimensional finite element numerical simulation of nine bionic micro-morphology and smooth one was completed, comparative analysis of contact stress were completed by the stress nephogram of contact stress. It shows that the peak of smooth model is higher than bionic micro-morphology on contact stress on contact area, but the average contact stress of bionic concave surface micro-morphology ring model are lower smooth model.

Key words: ANSYS, bionic, concave morphology, contact stress

CLC Number: 

  • TH161

[1] Mao K. Gear tooth contact analysis and its application in the reduction of fatigue wear[J]. Wear, 2007,262:1281-1288.

[2] Fakher Chaari , Tahar Fakhfakh, Mohamed Haddar. Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness[J]. European Journal of Mechanics A/Solids, 2009,28:461-468.

[3] Chaari F, Fakhfakh T, Hbaieb R, et al. Influence of manu-facturing errors on the dynamical behaviour of planetary gear[J]. Int. J. Adv. Man.Tec. 2006,27:738-746.

[4] Chaari F, Baccar W, Haddar M. Effect of spalling or tooth breakage ongearmesh stiffness and dynamic response of a one-stage spur gear transmis-sion[J]. Eur. J. Mech. A/Solids, 2008,27(4):691-705.

[5] 王哲,胡迎锋. 齿轮建模与接触应力分析[J]. 湖北工业大学学报,2006, 21(3): 56-59. Wang Zhe, Hu Ying-feng. Gears modeling and contact stress analysis[J]. Journal of Hubei University of Technology, 2006,21(3):56-59.

[6] 杨华生.齿轮接触有限元分析[J].计算力学学报,2003, 20(2):189-194. Yang Hua-sheng. Finite element analysis of gear contact[J]. Chinese Journal of Computational Mechanics, 2003, 20(2):189-194.

[7] 董立春,韩志武,吕尤,等. 凹坑型仿生形态环块样件耐磨性能试验研究[J]. 吉林大学学报:工学版,2011, 41(6), 1659-1663. Dong Li-chun,Han Zhi-wu,Lü You,et al. Experimental investigation on anti-wear properties of ring model with bionic concave morphology[J]. Journal of Jilin University(Engineering and Technology Edition), 2011, 41(6), 1659-1663.

[8] 韩志武,吕尤,董立春,等.仿生表面形态齿轮的模态分析[J].吉林大学学报:工学版,2010, 40(6): 1604-1608. Han Zhi-wu,Lü You,Dong Li-chun,et al. Modal analysis of gear with bionic surface morphology[J]. Journal of Jilin University(Engineering and Technology Edition), 2010, 40(6): 1604-1608.
[1] XI Peng,CONG Qian,WANG Qing-bo,GUO Hua-xi. Wear test and anti-friction mechanism analysis of bionic stripe grinding roll [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1787-1792.
[2] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[3] TIAN Wei-jun, WANG Ji-yue, LI Ming, ZHANG Xing-wang, ZHANG Yong, CONG Qian. Observation of locomotion of water strider towards water strider robot [J]. 吉林大学学报(工学版), 2018, 48(3): 812-820.
[4] LI Yin-wu, WU Qing-wen, CHANG Zhi-yong, YANG Cheng. Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth [J]. 吉林大学学报(工学版), 2018, 48(3): 821-827.
[5] QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[6] TAN Li-dong, LIU Dan, LI Wen-jun. Design of bionic compound eye array for traffic accident scene panorama based on fly compound eye [J]. 吉林大学学报(工学版), 2017, 47(6): 1738-1744.
[7] TIAN Li-mei, WANG Yang-jun, LI Zi-yuan, SHANG Yan-geng. Development of drag-reduction test system of bionic functional surfaces with internal flow [J]. 吉林大学学报(工学版), 2017, 47(4): 1179-1184.
[8] CHEN Dong-hui, LIU Wei, LYU Jian-hua, CHANG Zhi-yong, WU Ting, MU Hai-feng. Bionic design of corn stubble collector based on surface structure of Patinopecten yessoensis [J]. 吉林大学学报(工学版), 2017, 47(4): 1185-1193.
[9] HUANG Han, LI Jian-qiao, CHEN Bai-chao, WU Bao-guang, ZOU Meng. Experiment of impact performance of space lander footpad [J]. 吉林大学学报(工学版), 2017, 47(4): 1194-1200.
[10] WANG Ying, LI Jian-qiao, ZHANG Guang-quan, HUANG Han, ZOU Meng. Mechanical characteristics of bionic walking foot in different media [J]. 吉林大学学报(工学版), 2017, 47(2): 546-551.
[11] GE Chang-jiang, YE Hui, HU Xing-jun, YU Zheng-lei. Prediction and control of trailing edge noise on owl wings [J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[12] LI Meng, SU Yi-nao, SUN You-hong, GAO Ke. High matrix bionic abnormal shape impregnated diamond bit [J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[13] LIANG Yun-hong, REN Lu-quan. Preliminary study of habitat and its bionics [J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[14] LIANG Yun-hong, REN Lu-quan. Preliminary study of bionics in human life [J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
[15] QIAN Zhi-hui, MIAO Huai-bin, REN Lei, REN Lu-quan. Lower limb joint angles of German shepherd dog during foot-ground contact in different gait patterns [J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd