吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (3): 821-827.doi: 10.13229/j.cnki.jdxbgxb20171060

• Orginal Article • Previous Articles     Next Articles

Simulation and optimal design of backhoe hydraulic excavator based on bionic teeth

LI Yin-wu1,2, WU Qing-wen1,2, CHANG Zhi-yong1,2, YANG Cheng2,3   

  1. 1.College of Biological and Agricultural Engineering,Jilin University,Changchun 130022,China;
    2.Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University,Changchun 130022,China;
    3.Vehicle Engineering Department,Dongfeng Nissan Passenger Vehicle Company,Guangzhou 510800,China
  • Received:2017-11-06 Online:2018-05-20 Published:2018-05-20

RICH HTML

3   

PDF (PC)

340

Abstract: Combined with the research results of bionic teeth, a three-dimensional virtual model of the working device of a certain type backhoe hydraulic excavator was built in Pro/E software. The kinematics and dynamics of the model were analyzed in ADAMS software. The parameters of the backhoe hydraulic excavator working device were obtained, such as the maximum excavation height, the maximum excavation depth, the maximum unloading height, the minimum turning radius, the maximum excavation force of the stick and the maximum digging force of the bucket. Optimization results of the parameters of the boom of the working device show that the angle between the arc outer line and center line was 65°, and the arc radius of the boom was 210 mm.

Key words: mine mechanical engineering, hydraulic pressure excavator, bionics, boom simulation and optimization

CLC Number: 

  • TU621
[1] Solazzi L, Scalmana R.New design concept for a lifting platform made of composite material[J]. Applied Composite Materials,2013,20(4):615-626.
[2] Solazzi L.Design of aluminium boom and arm for an excavator[J]. Journal of Terramechanics,2010,47(4): 201-207.
[3] 张业祥,赵刚,章翔,等. 液压挖掘机工作装置有限元分析[J]. 现代制造工程,2016(2):89-93,98.
Zhang Ye-xiang,Zhao Gang,Zhang Xiang,et al.Finite element analysis for the hydraulic excavator working device[J]. Modern Manufacturing Engineering,2016(2):89-93,98.
[4] 汪建华,胡晓莉,张华,等. 液压挖掘机动臂有限元分析方法研究[J]. 机械设计与制造,2013(12):170-173.
Wang Jian-hua,Hu Xiao-li,Zhang Hua, et al.Study of finite element analysis method of hydraulic excavator mobile arm[J]. Machinery Design & Manufacture,2013(12):170-173.
[5] Morales D O,Westerberg S,Lahera P X,et al.Increasing the level of automation in the forestry logging process with crane trajectory planning and control[J]. Journal of Field Robotics,2014,31(3):343-363.
[6] Zhang Bin,Wang Shuang,Liu Yu-ting,et al.Research on trajectory planning and autodig of hydraulic excavator[J]. Mathematical Problems in Engineering,2017(1):1-10.
[7] 管成,王飞,张登雨. 基于NURBS的挖掘机器人时间最优轨迹规划[J]. 吉林大学学报:工学版,2015,45(2): 540-546.
Guan Cheng,Wang Fei,Zhang Deng-yu.NURBS -based time-optimal trajectory planning on robotic excavators[J]. Journal of Jilin University(Engineering and Technology Edition),2015,45(2):540-546.
[8] Chen Jin,Qing Fei,Pang Xiao-ping.Mechanism optimal design of backhoe hydraulic excavator working device based on digging paths[J]. Journal of Mechanical Science and Technology,2014,28(1):213-222.
[9] Wang Chun-hua,Gao Yang,Zhang Ying-yin,et al.Dynamic characteristics of the backhoe excavator bucket based on Pro/E and ANSYS[J]. Advanced Materials Research,2013,619(4):30-33.
[10] Ding Hua-feng,Han Lei,Yang Wen-jian,et al.Kinematics and dynamics analyses of a new type face-shovel hydraulic excavator[J]. Journal of Mechanical Engineering Science,2017,231(5):909-924.
[11] Šalini? S,Boškovi? G,Nikoli? M.Dynamic modelling of hydraulic excavator motion using Kane's equations[J]. Automation in Construction,2014,44:56-62.
[12] Bennett N,Walawalkar A,Heck M,et al.Integration of digging forces in a multi-body-system model of an excavator[J]. Journal of Multi-body Dynamics,2016,230(2):159-177.
[13] 邓艳宁,李发宗,王相兵,等. 基于等效有限元方法的液压挖掘机工作装置动力学及特性研究[J]. 机械科学与技术,2016,35(1):73-79.
Deng Yan-ning,Li Fa-zong,Wang Xiang-bing,et al.Study on dynamics for working device of hydraulic excavator based on the equivalent finite element method[J]. Mechanical Science and Technology for Aerospace Engineering,2016,35(1):73-79.
[14] 张桂菊,肖才远,谭青,等. 基于虚拟样机技术挖掘机工作装置动力学分析及仿真[J]. 中南大学学报:自然科学版,2014,45(6):1827-1833.
Zhang Gui-ju,Xiao Cai-yuan,Tan Qing,et al.Dynamic analysis and simulation of excavator working device based on virtual prototype technology[J]. Journal of Central South University (Science and Technology),2014,45(6):1827-1833.
[15] 邱清盈,魏振凯,高宇,等. 挖掘机工作装置疲劳分析方法[J]. 吉林大学学报:工学版,2016,46(1):161-165.
Qiu Qing-ying,Wei Zhen-kai,Gao yu, et al. Fatigue analysis method of working devices of hydraulic excavator[J]. Journal of Jilin University (Engineering and Technology Edition),2016,46(1):161-165.
[16] 银光球,林述温,张宁. 单斗液压挖掘机反铲装置动力学模型的建立[J]. 中国工程机械学报,2014,12(3):189-193.
Yin Guang-qiu,Lin Shu-wen,Zhang Ning.Dynamical modeling for backhoe device of single-bucket hydraulic excavators[J]. Chinese Journal of Construction Machinery,2014,12(3):189-193.
[17] Guo Xing,Mao Yi-chao,Kang Kai.Dynamic simulation research on hydraulic system of backhoe dredger excavator[J]. Human Centered Computing,2015,8944:757-764.
[18] 杨成. 挖掘机工作装置的斗齿仿生及动臂优化研究[D]. 长春:吉林大学生物与农业工程学院,2013.
Yang Cheng.The bionic bucket teeth and optimization of boom of excavator working device[D]. Changchun: College of Biological and Agricultural Engineering, Jilin University,2013.
[19] 张琰,黄河,任露泉. 仿生挖掘机斗齿减阻试验[J]. 吉林大学学报:工学版,2012,42(增刊1):126-130.
Zhang Yan, Huang He, Ren Lu-quan.Drag reduction experiment of bionic excavator bucket teeth[J]. Journal of Jilin University (Engineering and Technology Edition),2012,42(Sup.1):126-130.
[1] XI Peng,CONG Qian,WANG Qing-bo,GUO Hua-xi. Wear test and anti-friction mechanism analysis of bionic stripe grinding roll [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1787-1792.
[2] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[3] QIAN Zhi-hui, ZHOU Liang, REN Lei, REN Lu-quan. Completely passive walking machine with bionic subtalar joint and matatarsal phalangeal joint [J]. 吉林大学学报(工学版), 2018, 48(1): 205-211.
[4] HUANG Han, LI Jian-qiao, CHEN Bai-chao, WU Bao-guang, ZOU Meng. Experiment of impact performance of space lander footpad [J]. 吉林大学学报(工学版), 2017, 47(4): 1194-1200.
[5] GE Chang-jiang, YE Hui, HU Xing-jun, YU Zheng-lei. Prediction and control of trailing edge noise on owl wings [J]. 吉林大学学报(工学版), 2016, 46(6): 1981-1986.
[6] LI Meng, SU Yi-nao, SUN You-hong, GAO Ke. High matrix bionic abnormal shape impregnated diamond bit [J]. 吉林大学学报(工学版), 2016, 46(5): 1540-1545.
[7] LIANG Yun-hong, REN Lu-quan. Preliminary study of habitat and its bionics [J]. 吉林大学学报(工学版), 2016, 46(5): 1746-1756.
[8] LIANG Yun-hong, REN Lu-quan. Preliminary study of bionics in human life [J]. 吉林大学学报(工学版), 2016, 46(4): 1373-1384.
[9] QIU Qing-ying, WEI Zhen-kai, GAO Yu, FENG Pei-en, YIN Peng-long. Fatigue analysis method of working devices of hydraulic excavator [J]. 吉林大学学报(工学版), 2016, 46(1): 159-165.
[10] QIAN Zhi-hui, MIAO Huai-bin, REN Lei, REN Lu-quan. Lower limb joint angles of German shepherd dog during foot-ground contact in different gait patterns [J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
[11] ZOU Meng, YU Yong-jun, ZHANG Rong-rong, WEI Can-gang, WANG Hui-xia. Simulation analysis of energy-absorption properties of thin-wall tube based on horn structure [J]. 吉林大学学报(工学版), 2015, 45(6): 1863-1868.
[12] YANG Zhuo-juan, WANG Qing-cheng, GAO Ying, MEN Yu-zhuo, YANG Xiao-dong. Effect of different solutions on the wettability of lotus leaves [J]. 吉林大学学报(工学版), 2015, 45(6): 1869-1873.
[13] TIAN Wei-jun, WANG Ji-yue1, LI Ming1, CHEN Si-yuan, LIU Fang-yuan, CONG Qian. Bionic design of the small blade of horizontal axis wind turbines [J]. 吉林大学学报(工学版), 2015, 45(5): 1495-1501.
[14] TIAN Gui-zhong, LIU Zhi-ling, ZHOU Hong-gen, SONG Jiang-chao, ZHU Tao. Quasi-static axial tensile mechanical characteristics of silkworm's anterior silk gland [J]. 吉林大学学报(工学版), 2015, 45(3): 872-877.
[15] ZENG Yi-cong,XU Hai-liang,LI Feng,WU Bo. Influence of drum-shape error on combined roller bearing torque of high pressure grinding rolls [J]. 吉林大学学报(工学版), 2015, 45(2): 466-472.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] Guo Kong-hui;Wang Shuang;Ding Hai-tao;Zhang Jian-wei . Elastic coupling characteristic of unsymmetrical rubber bushings of rear suspension[J]. 吉林大学学报(工学版), 2007, 37(06): 1225 -1228 .
[2] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[3] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[4] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[5] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[6] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[7] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[8] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[9] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[10] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd