Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (5): 1575-1582.doi: 10.13229/j.cnki.jdxbgxb20200544

Previous Articles    

Starting control of P2.5 plug⁃in hybrid configuration dual⁃clutch based on driver's intention recognition

Yong LUO1,2,3(),Yong-heng WEI2,Huan HUANG2,Ren-jie XIAO2,Lin REN2,Huan-yu CUI3   

  1. 1.State Key Laboratory of Vehicle NVH and Safety Control，China Automotive Engineering Research Institute Co. ，Ltd. ，Chongqing 401122，China
    2.Key Laboratory of Advanced Manufacturing Technology for Automobile Parts，Chongqing University of Technology，Chongqing 400054，China
    3.Department of Technology，Chongqing Tsingshan Industrial Co. ，Ltd. ，Chongqing 402761，China
  • Received:2020-07-19 Online:2021-09-01 Published:2021-09-16

RICH HTML

 5   

PDF (PC)

191

Abstract:

During the starting process of single clutch， the temperature rise of clutch plate is obvious and the sliding friction power is uneven， which seriously affects the service life of DCT. Based on the configuration of P2.5 plug-in hybrid electric vehicle equipped with DCT， combined with the starting dynamics analysis and considering the driver's starting intention， a starting strategy based on multi-layer fuzzy control is proposed. The driver's starting intention is identified according to the accelerator pedal opening and its change rate， and the clutch combination oil pressure is deduced according to the starting intention to control the transmission torque， at the same time， the clutch separation threshold is judged according to the driver's starting intention. The results show that： compared with single clutch starting， the starting time can be shortened by 12.6% and the impact degree can be reduced by 14.0% while effectively balancing the sliding work of the two clutches.

Key words: vehicle engineering, P2.5 plug-in hybrid configuration, wet dual clutch transmission, multilayer fuzzy controller, driver's starting intention recognition

CLC Number: 

  • TH13

Fig.1

Structure of P2.5 plug-in hybrid system based on DCT"

Fig.2

Clutch oil pressure/torque transmission diagram"

Fig.3

Simplified DCT system dynamics model based on P2.5 configuration"

Fig.4

Control logic diagram of dual clutch joint starting process"

Fig.5

Simulation of driver starting intention verification"

Fig.6

Simulation results of starting process with 15% accelerator pedal opening"

Fig.7

Simulation results of starting process with 15% accelerator pedal opening"

1 DeCarolis J, Daly H, Dodds P, et al. Formalizing best practice for energy system optimization modelling[J]. Applied Energy, 2017, 194: 184-198.
2 杨文斌, 何东伟. Position 2(P2)构型混合动力文献综述[J]. 科技视界, 2018, 255(33): 87-88.
Yang Wen-bin, He Dong-wei. Literature review of Position2(P2) configuration hybrid power[J]. Science & Technology Vision, 2018, 255(33): 87-88.
3 王琪, 赵治国, 陈海军, 等. DCT混合动力汽车构型分析[J]. 汽车技术, 2013, 10(5): 29-33.
Wang Qi, Zhao Zhi-guo, Chen Hai-jun, et al. Configuration analysis of hybrid electric vehicle equipped with dual clutch transmission[J]. Automobile Technology, 2013, 10(5): 29-33.
4 Hong J, Wang Z, Zhang T, et al. Research on integration simulation and balance control of a novel load isolated pure electric driving system[J]. Energy, 2019, 189: 116220.
5 Kulkarni M, Shim T, Zhang Y. Shift dynamics and control of dual-clutch transmissions[J]. Mechanism and Machine Theory, 2007, 42(2): 168-182.
6 Goetz M, Levesley M C, Crolla D A. Dynamics and control of gearshifts on twin-clutch transmissions[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005, 219(8): 951-963.
7 Bao R, Avila V, Baxter J. Effect of 48 V mild hybrid system layout on powertrain system efficiency and its potential of fuel economy improvement[C]∥SAE Technical Paper, 2017-01-1175.
8 Xu X, Liang Y, Jordan M, et al. Optimized control of engine start assisted by the disconnect clutch in a P2 hybrid automatic transmissions[J]. Mechanical Systems and Signal Processing, 2019, 124: 313-329.
9 Yang C, Song J, Li L, et al. Economical launching and accelerating control strategy for a single-shaft parallel hybrid electric bus[J]. Mechanical Systems and Signal Processing, 2016, 76: 649-664.
10 Tao G, Wu M, Meng F. Online performance evaluation of a heavy-duty automatic transmission launching process[J]. Mechatronics, 2016, 38: 143-150.
11 王伟, 王庆年, 田涌君, 等. 基于模糊控制功率分流式混合动力客车控制策略[J]. 吉林大学学报: 工学版, 2017, 47(2): 337-343.
Wang Wei, Wang Qing-nian, Tian Yong-jun,et al. Control strategy of power-split hybrid electric bus based on fuzzy control[J]. Journal of Jilin University(Engineering and Technology Edition), 2017, 47(2): 337-343.
12 Zhang J, Guo J, Gui L. Study on launch control strategies of dual clutch transmission[C]∥2012 IEEE International Conference on Mechatronics and Automation, Chengdu, China, 2012: 1142-1147.
13 Zhao Z G, Jiang J L, Yu Z P, et al. Starting sliding mode variable structure that coordinates the control and real-time optimization of dry dual clutch transmissions[J]. International Journal of Automotive Technology, 2013, 14(6): 875-888.
14 Wu X G, Wang X D, Yu T W, et al. Control of electromagnetic clutch during vehicles start[C]∥2008 IEEE Vehicle Power and Propulsion Conference, Harbin, China, 2008, 1-5.
15 Zhao Z, Li X, He L, et al. Estimation of torques transmitted by twin-clutch of dry dual-clutch transmission during vehicle's launching process[J]. IEEE Transactions on Vehicular Technology, 2016, 66(6): 4727-4741.
16 秦大同, 杨官龙, 胡明辉, 等. 基于驾驶意图的插电式混合动力汽车能量管理策略[J]. 吉林大学学报: 工学版, 2015, 45(6): 1743-1750.
Qin Da-tong, Yang Guan-long, Hu Ming-hui, et al. Energy management strategy of plug-in hybrid electric vehicle based on driving intention[J]. Journal of Jilin University(Engineering and Technology Edition), 2015, 45(6): 1743-1750.
17 Zhao Z G, Chen H J, Zhen Z X, et al. Optimal torque coordinating control of the launching with twin clutches simultaneously involved for dry dual-clutch transmission[J]. Vehicle System Dynamics, 2014, 52(6): 776-801.
18 Shi G, Liu Y, Han X, et al. Control strategy of vehicle automatic transmissions matching with start-stop system[J]. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(12): 91-98.
19 You Y, Sun D, Qin D. Research on vehicle starting control based on reflux power condition[J]. Mechanism and Machine Theory, 2019, 134: 289-307.
20 宋世欣, 张元侠, 刘科, 等. 双离合器自动变速器控制品质评价指标分析[J]. 汽车工程, 2015(8): 925-930, 958.
Song Shi-xin, Zhang Yuan-xia, Liu Ke, et al. An analysis on the evaluation metrics of control quality for vehicle with dual clutch transmission[J]. Automotive Engineering, 2015(8): 925-930, 958.
[1] Xin CHEN,Gui-shen YU,Biao ZHANG,Kai-xuan PAN,Li-fei YANG. Equivalent modeling of tensile-shear behavior for friction stir spot welding joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(4): 1190-1197.
[2] Jian YANG,Qi XIA,Hai-chao ZHOU,Guo-lin WANG. Noise reduction mechanism of truck radial tire based on modified carcass string contour design [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(4): 1198-1203.
[3] Jiang-qi LONG,Jin-tao XIANG,Ping YU,Jun-cheng WANG. Linear disturbance observer suitable for sliding mode control of nonlinear active suspension [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(4): 1230-1240.
[4] Feng-chong LAN,Ji-wen LI,Ji-qing CHEN. DG-SLAM algorithm for dynamic scene compound deep learning and parallel computing [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(4): 1437-1446.
[5] Bo WANG,Yang-yang HE,Bing-bing NIE,Shu-cai XU,Jin-huan ZHANG. Abdominal injury of vehicle occupant in underbody blast events [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 792-798.
[6] Wei-min ZHUANG,Peng-yue WANG,Rui-juan GAO,Dong-xuan XIE. Effect of hot forming on static mechanical properties of AA5754 aluminum alloy [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 847-854.
[7] Qiang SONG,Dan-ting SUN,Wei ZHANG. Shift nonlinear modeling and control of automated mechanical transmission in pure electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 810-819.
[8] Da-feng SONG,Li-li YANG,Xiao-hua ZENG,Xing-qi WANG,Wei-zhi LIANG,Nan-nan YANG. Battery life optimization of hybrid electric vehicle based on driving cycle construction [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 781-791.
[9] Jia-xu ZHANG,Xin-zhi WANG,Jian ZHAO,Zheng-tang SHI. Path planning and discrete sliding mode tracking control for high⁃speed lane changing collision avoidance of vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 1081-1090.
[10] Ren HE,Xiao-cong ZHAO,Yi-bin YANG,Jian-qiang WANG. Man⁃machine shared driving model using risk⁃response mechanism of human driver [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 799-809.
[11] Wei-da WANG,Yan-jie WU,Jia-lei SHI,Liang LI. Electronic hydraulic brake power system control strategy based on driver intention recognition [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 406-413.
[12] Guo-ying CHEN,Jun YAO,Peng WANG,Qi-kun XIA. Stability control strategy for rear in⁃wheel motor drive vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 397-405.
[13] Shou-tao LI,Rui WANG,Jing-chun XU,De-jun WANG,Yan-tao TIAN,Ding-li YU. A vehicle collision avoidance control method based on model predictive composite control [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 738-746.
[14] Lu XIONG,Yan-chao WEI,Le-tian GAO. Inertial measurement unit/wheel speed sensor integrated zero-speed detection [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 134-138.
[15] Fang-wu MA,Hong-yu LIANG,Qiang WANG,Yong-feng PU. In-plane dynamic crushing of dual-material structure with negative Poisson′s ratio [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 114-121.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd