中国人群距骨形态学指标的三维CT测量及其临床意义

doi:10.13481/j.1671-587x.20200118

吉林大学学报(医学版) ›› 2020, Vol. 46 ›› Issue (01): 102-107.doi: 10.13481/j.1671-587x.20200118

中国人群距骨形态学指标的三维CT测量及其临床意义

刘旸¹, 韩青¹, 尹唯凰², 吴乃超¹, 张奥博¹, 陈炳鹏¹, 王金成¹

1. 吉林大学第二医院关节外科, 吉林长春 130041;
2. 吉林大学口腔医院口腔颌面外科, 吉林长春 130021

收稿日期:2019-07-03 出版日期:2020-01-28 发布日期:2020-02-03
通讯作者: 王金成,教授,博士研究生导师(Tel:0431-81136747,E-mail:jinchengwang@hotmail.com);韩青,讲师(Tel:0431-81136747,E-mail:my.hanqing@163.com) E-mail:jinchengwang@hotmail.com;my.hanqing@163.com
作者简介:刘旸(1994-),男,吉林省长春市人,在读医学硕士,主要从事骨科距骨形态学方面的研究。
基金资助:
国家自然科学基金资助课题（81802174）；吉林省科技厅省级科技专项基金资助课题（20170204004GX，20180520115JH）；吉林省发改委科研项目资助课题（2018C010）

Measurement of morphological indexes of talus of Chinese population with three-dimensional CT and its significance

LIU Yang¹, HAN Qing¹, YIN Weihuang², WU Naichao¹, ZHANG Aobo¹, CHEN Bingpeng¹, WANG Jincheng¹

1. Department of Orthopedics, Second Hospital, Jilin University, Changchun 130041, China;
2. Department of Oral and Maxillofacial Surgery, Stomatology Hospital, Jilin University, Changchun 130021, China

Received:2019-07-03 Online:2020-01-28 Published:2020-02-03

摘要/Abstract

摘要： 目的：采用三维测量方法测量并分析中国人群距骨的形态学指标，提供精确的距骨形态学数据，为设计距骨假体提供参考。方法：参与本研究的志愿者包括男性40人和女性40人，排除4人，最终纳入76人，其中男性39人，女性37人。对距骨形态正常的所有受试者的踝关节进行CT扫描，CT数据经Mimics软件重建为三维模型。对受试者距骨长、宽、高和体积，内踝关节面长、宽和弧度，外踝关节面长、宽和高，滑车前、中和后宽在内的13项形态学指标进行测量，其中9项指标采用Mimics软件测量，4项指标采用Magics软件测量。结果：本组受试者所有测量指标均呈正态分布，左右侧距骨形态学指标比较差异均无统计学意义（P>0.05）。男性受试者距骨长、宽和高分别为（60.85±2.82）、（42.96±2.59）和（33.76±1.73）mm，女性受试者距骨长、宽和高分别为（54.41±2.49）、（39.76±1.78）和（29.72±1.20）mm。男性受试者大部分距骨测量指标均明显大于女性（P<0.05），但女性受试者内踝关节面弧度明显大于男性（P<0.05）。男性和女性受试者外踝关节面弧度和滑车后宽比较差异均无统计学意义（P>0.05）。结论：CT测量法测量距骨形态学指标更便捷，测量误差小，可重复性高，且左右侧距骨一致性高，在设计距骨假体时，健侧距骨的形态学参数可作为重要参考。

关键词: 距骨测量, 三维CT, 距骨置换, 假体

Abstract: Objective: To measure and anlyze the morphological indexes of talus of the Chinese population with three-dimensional measurement method and to provide the accurate data of morphological parameters of talus, and to pvovide basis for designing the talar prostheses. Methods: Forty male and 40 female volunteers applied for this study and 4 of them were excluded. At last, 76 volunteers of 39 males and 37 females were included. The ankle joints of 76 subjects were scanned by CT and the CT images were reconstructed to three-dimensional model with Mimics software.A total of 13 indexes were measured including talar length, breadth, height, and volume, length, breadth, and radian of medial and lateral malleolus articular surfaces, anterior, middle, and posterior breadth of trochlea; among 13 indexes, 9 indexes were measured through Mimics software,and the other 4 indexes were measured through Magics software. Results: All the indexes of the subjects were normally distributed. There were no significant differences in the morphological indexes between left and right talus in either males or females (P>0.05). The talar length, breadth, and height in the males were (60.85±2.82), (42.96±2.59), and (33.76±1.73) mm, respectively, and in the females they were (54.41±2.49), (39.76±1.78), and (29.72±1.20) mm, respectively. Most of the indexes were larger in the males than the females (P<0.05), whereas radian of medial malleolus articular surface was larger in the females than the males (P<0.05).The radian of lateral malleolus articular surface and the posterior breadth of trochlea of the males and the females had no significant differences (P>0.05). Conclusion: CT measurement method to measure the morphological indexes of talus is more convenient and fast,its measurement error is small,and its erpeatability is high.Left and right sides of talus show strong degree of symmetry, thus the morphological indexes of the contralateral talus can be adopted as a reference for designing talus prosthesis.

Key words: talar measurement, three-dimensional CT, talar arthroplasty, prosthesis

中图分类号:

R323.72

刘旸, 韩青, 尹唯凰, 吴乃超, 张奥博, 陈炳鹏, 王金成. 中国人群距骨形态学指标的三维CT测量及其临床意义[J]. 吉林大学学报(医学版), 2020, 46(01): 102-107.

LIU Yang, HAN Qing, YIN Weihuang, WU Naichao, ZHANG Aobo, CHEN Bingpeng, WANG Jincheng. Measurement of morphological indexes of talus of Chinese population with three-dimensional CT and its significance[J]. Journal of Jilin University(Medicine Edition), 2020, 46(01): 102-107.

参考文献

[1] BYKOV Y. Fractures of the talus[J]. Clin Podiatr Med Surg, 2014, 31(4):509-521.
[2] TANIGUCHI A, TAKAKURA Y, TANAKA Y, et al. An alumina ceramic total talar prosthesis for osteonecrosis of the talus[J]. J Bone Joint Surg Am, 2015, 97(16):1348-1353.
[3] 陆进, 张雨桐, 夏凤云, 等. 距骨的解剖学测量及其临床意义[J]. 四川解剖学杂志, 2019, 27(3):5-7.
[4] ISLAM K, DOBBE A, DUKE K, et al. Three-dimensional geometric analysis of the talus for designing talar prosthetics[J]. Proc Inst Mech Eng H, 2014, 228(4):371-378.
[5] TANIGUCHI A, TAKAKURA Y, SUGIMOTO K, et al. The use of a ceramic talar body prosthesis in patients with aseptic necrosis of the talus[J]. J Bone Joint Surg Br, 2012, 94(11):1529-1533.
[6] HARNROONGROJ T, VANADURONGWAN V. The talar body prosthesis[J]. J Bone Joint Surg Am, 1997, 79(9):1313-1322.
[7] HARNROONGROJ T, HARNROONGROJ T. The talar body prosthesis:results at ten to thirty-six years of follow-up[J]. J Bone Joint Surg Am, 2014, 96(14):1211-1218.
[8] KNUSSMANN R, SPERWIEN A. Relations between anthropometric characteristics and androgen hormone levels in healthy young men[J]. Ann Hum Biol, 1988, 15(2):131-142.
[9] ZHAO D H, HUANG D C, ZHANG G H, et al. Gender variation in the shape of superior talar dome:A cadaver measurement based on Chinese population[J]. Biomed Res Int, 2018, 2018:6087871.
[10] KARAKAS H M, HARMA A, ALICIOGLU B. The subpubic angle in sex determination:anthropometric measurements and analyses on Anatolian Caucasians using multidetector computed tomography datasets[J]. J Forensic Leg Med, 2013, 20(8):1004-1009.
[11] HE J Q, MA X L, ZHANG X, et al. Three-dimensional computer-assisted modeling of talus morphology in Chinese patients[J]. Orthop Surg, 2016, 8(3):383-392.
[12] LI J T, ZHANG H, YIN P, et al. A new measurement technique of the characteristics of nutrient artery canals in tibias using Materialise's interactive medical image control system software[J]. Biomed Res Int, 2015, 2015:171672.
[13] 孙晓亮, 官建中, 吴敏, 等. 3D打印技术在成人距骨骨折手术中的临床应用[J]. 安徽医药, 2019, 23(6):1163-1166.
[14] SAKAUE K. Sex assessment from the talus and calcaneus of Japanese[J]. Bull Natl Mus Nat Sci,2011,D(37):35-48.
[15] PECKMANN T R, ORR K, MEEK S, et al. Sex determination from the talus in a contemporary Greek population using discriminant function analysis[J]. J Forensic Leg Med, 2015, 33:14-19.
[16] MATSUKAWA K, YATO Y, NEMOTO O, et al. Morphometric measurement of cortical bone trajectory for lumbar pedicle screw insertion using computed tomography[J]. J Spinal Disord Tech, 2013, 26(6):E248-E253.
[17] TOMASZEWSKA I M, FRACZEK P, GOMULSKA M, et al. Sex determination based on the analysis of a contemporary Polish population's palatine bones:A computed tomography study of 1200 patients[J]. Folia Morphol (Warsz), 2014, 73(4):462-468.
[18] ENGELKE K, LIBANATI C, FUERST T, et al. Advanced CT based in vivo methods for the assessment of bone density, structure, and strength[J]. Curr Osteoporos Rep, 2013, 11(3):246-255.
[19] 时飞跃,柏正璐,秦航,等.西门子CT模拟机图像均匀性的长期稳定性分析[J].中国医学物理学杂志,2018,35(9):1035-1038.
[20] 徐翔燕.基于解剖学参数的踝关节假体的设计及力学仿真[D].上海:上海交通大学,2015.
[21] ISLAM K, DOBBE A, KOMEILI A, et al. Symmetry analysis of talus bone:A geometric morphometric approach[J]. Bone Joint Res, 2014, 3(5):139-145.
[22] 马立广, 曹彦荣, 徐玖瑾, 等. 中国102个人群的身高与地理环境相关性研究[J]. 人类学学报, 2008, 27(3):223-231.
[23] KUO C C, LU H L, LEARDINI A, et al. Three-dimensional computer graphics-based ankle morphometry with computerized tomography for total ankle replacement design and positioning[J]. Clin Anat, 2014, 27(4):659-668.

中国人群距骨形态学指标的三维CT测量及其临床意义

Measurement of morphological indexes of talus of Chinese population with three-dimensional CT and its significance

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

Metrics

本文评价

推荐阅读 10

[1]	白芃, 于镇滔, 孙嘉良, 程凯亮, 韩莹莹, 李幼琼. 采用CT三维图像测量国人颞下颌关节假体固定区域形态学参数及其临床意义[J]. 吉林大学学报(医学版), 2017, 43(05): 985-989.
[2]	李忱, 邹运, 王晓楠, 赵洪宇, 韩青, 王金成. 3D打印技术在复杂肿瘤膝关节股骨假体周围骨折翻修术中的应用[J]. 吉林大学学报(医学版), 2016, 42(05): 980-984.
[3]	孙庆，刘鹏，李英普，左建林，秦彦国，高忠礼. X线评估对人工髋置换股骨假体选择及功能评价的意义(附71例报告)[J]. J4, 2008, 34(4): 694-697.
[4]	王鹏，路来金，宣昭鹏，张志新，刘灿. 个体化掌指关节假体三维建模及其髓内柄的计算机辅助设计[J]. J4, 2008, 34(1): 147-149.
[5]	谷长跃,张国鑫,杨树忠,高志学. 全髋关节置换与双动人工股骨头置换术后远期疗效比较[J]. J4, 2005, 31(6): 937-939.
[6]	左建林，杨勇，高忠礼. 全髋关节置换的生物力学及相关问题[J]. J4, 2005, 31(3): 483-485.