J4

• 基础研究 • 上一篇    下一篇

牙科ZrO2(3Y)/Al2O3纳米复合陶瓷材料的研制及其力学性能

宋文植1,刘晓秋2,孙宏晨2*,尹万忠3   

  1. 1. 吉林大学中日联谊医院口腔科,吉林 长春130031;2.吉林大学口腔医院病理学教研室,吉林 长春130041;3. 吉林大学第一医院耳鼻咽喉-头颈外科,吉林 长春130021
  • 收稿日期:2005-01-13 修回日期:1900-01-01 出版日期:2005-11-28 发布日期:2005-11-28
  • 通讯作者: 孙宏晨

Research and preparation of ZrO2(3Y)/Al2O3 nano-ceramiccomposite and its mechanical properties for dental application

SONG Wen-zhi1,LIU Xiao-qiu2,SUN Hong-chen2*,YIN Wan-zhong3   

  1. 1. Department of Stomatology,China-Japan Union Hospital,Jilin University,Changchun 130031,China;2. Department of Pathology,Stomatology Hospital,Jilin University, Changchun 130041,China;3. Department of Otorhinolaryngology and Head-Neck Surgery, First Hospital, Jilin University,Changchun 130021,China
  • Received:2005-01-13 Revised:1900-01-01 Online:2005-11-28 Published:2005-11-28
  • Contact: SUN Hong-chen

摘要: 目的:研制新型口腔修复用纳米复合全瓷材料并探讨其力学性能。方法:将纳米ZrO2(3Y)粉体以不同体积百分比加入微米级Al2O3粉体中,测试不同纳米 粉含量对试样力学性能的影响。结果:添加10%(V/V)ZrO2(3Y)粉体时试样力学性能最佳,其弯曲强度和断裂韧性分别为(424.43±30.30)MPa和(4.31±0.30)MPa m1/2。 结论:添加10%(V/V)ZrO2(3Y)纳米粉的纳米复合陶瓷, 其力学性能可以满足口腔修复需要,添加过量纳米粉反而使试样力学性能降低。

关键词: 氧化锆, 氧化铝, 纳米粉

Abstract: Objective To study the new kind of nano-ceramic composite for prosthodontics and its mechanical property. Methods The different volume fractions of Zirconia nano-powder were added into micrometer Alumina powder and the mechanical properties of the samples were tested. Results The sample with 10%(V/V)ZrO2(3Y) nano powder had the best mechanical properties,the flexural strength and fructure toughness were (424.43±30.30)MPa and(4.31±0.30)MPa m1/2,respectively. Conclusion The mechanical property of nano-ceramic composite with 10%(V/V)ZrO2(3Y) nano powder could fit the demand of prothodontics,excessive content of nano-powder decrease the samples′ properties on the contrary.

Key words: Zirconia, Alumina, nano-powder

中图分类号: 

  • R783.1