吉林大学学报(工学版)

• • 上一篇    下一篇

虚拟仪器在汽车尾流测量中的应用

傅立敏,胡兴军   

  1. 吉林大学 汽车工程学院, 长春 130022
  • 收稿日期:2005-07-28 修回日期:2005-12-15 出版日期:2006-09-01 发布日期:2006-09-01
  • 通讯作者: 傅立敏

Application of virtual instrument in wake measurement of road vehicle

Fu Li-min, Hu Xing-jun   

  1. College of Automotive Engineering, Jilin University, Changchun 130022, China
  • Received:2005-07-28 Revised:2005-12-15 Online:2006-09-01 Published:2006-09-01
  • Contact: Fu Li-min

摘要: 仪器功能单一固定、开发周期长、价格昂贵且不易维护升级的弊端,引入虚拟仪器的概念,用NI公司的LabVIEW软件,通过可视化编程,为汽车风洞开发了尾流速度测量虚拟仪器系统,弥补了尾流测试设备在开发、维护以及升级等方面的不足。使用该系统进行某国产轿车尾流速度测量试验,所得结果与先前进行的试验研究和数值计算结果均保持一致,证明了虚拟仪器的有效性。

关键词: 汽车空气动力学, 虚拟仪器, 热线, 尾流测量

Abstract: In order to measure the velocity distribution in the wake of a driving vehicle to clarify the wake structure, considering the shortcomings of the traditional test instruments including their function singularity, tedious development, high price, and difficult maintenance and update, the concept of virtual instrument was introduced, and a virtual instrument system was developed based on hotwire anemometer to measure the wake velocity distribution of the road vehicles in the automotive wind tunnel by means of visual programming through LabVIEW software, a product of National Instrument Company, USA. With this system, being without the deficiencies of the traditional instruments in the aspects of development, maintenance and update, experiments were made to gain the wake velocity distribution behind a certain car made in China, and the results are in accordance with those of the numerical simulation and the former experimental research, validating the virtual instrument system.

Key words: vehicle aerodynamics, virtual instrument, hot wire, wake measurement

中图分类号: 

  • U461.1
[1] 王靖宇, 于旭涛, 胡兴军, 郭鹏, 辛俐, 郭峰, 张扬辉. 汽车外后视镜流致振特性及其流动机理[J]. 吉林大学学报(工学版), 2017, 47(6): 1669-1676.
[2] 高印寒, 唐荣江, 梁杰, 樊宽刚, 张澧桐, 钱堃. 基于径向基函数神经网络的车内噪声品质评价系统[J]. , 2012, (06): 1378-1383.
[3] 马丽, 张舟云, 贡俊. 基于RBF神经网络和虚拟仪器的车用电测功系统数据处理[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 311-315.
[4] 随阳轶, 林君, 张晓拓,王世隆. 数据流可视化语言的运行模型[J]. 吉林大学学报(工学版), 2009, 39(06): 1635-1640.
[5] 韩峰,吴文福,张亚秋,朱航 . 基于虚拟仪器的粮食干燥机自动控制系统[J]. 吉林大学学报(工学版), 2009, 39(03): 643-0647.
[6] 周求湛,张苑,孙玉晶,张贺彬,谢宁 . 基于独立分量分析的光电耦合器件
可靠性时域筛选方法
[J]. 吉林大学学报(工学版), 2008, 38(05): 1242-1247.
[7] 胡兴军;张英朝;李胜;林有志;王加雪;杨永柏 . 基于微分雷诺应力湍流模型的车辆气动特性的数值模拟[J]. 吉林大学学报(工学版), 2008, 38(03): 504-0507.
[8] 王靖宇,胡兴军,田华,张英朝,吴长鹏 . 导流罩对轻型厢式货车气动特性影响的数值模拟[J]. 吉林大学学报(工学版), 2008, 38(01): 12-016.
[9] 贺宝琴,吴允柱,傅立敏 . 汽车外形对智能车辆队列行驶气动特性的影响[J]. 吉林大学学报(工学版), 2008, 38(01): 7-011.
[10] 杨永柏;王靖宇;胡兴军 . 皮卡车外流场的数值模拟[J]. 吉林大学学报(工学版), 2007, 37(06): 1236-1241.
[11] 随阳轶,林君,范永开 . 面向虚拟仪器的DFVPL:LabScene的自动连线[J]. 吉林大学学报(工学版), 2007, 37(05): 1203-1208.
[12] 吴允柱,贺宝琴,傅立敏 . 车速对超车车辆瞬态气动特性的影响[J]. 吉林大学学报(工学版), 2007, 37(05): 1009-1013.
[13] 范永开,林君,孙天泽,随阳轶 . 基于需求驱动的虚拟仪器软件自动生成构架[J]. 吉林大学学报(工学版), 2007, 37(03): 606-0610.
[14] 金振华;高大威;卢青春;阎东林 . 燃料电池汽车车载信息监控系统[J]. 吉林大学学报(工学版), 2006, 36(06): 876-0880.
[15] 傅立敏;吴允柱;贺宝琴 . 队列行驶车辆的空气动力特性[J]. 吉林大学学报(工学版), 2006, 36(06): 871-0875.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!