纳米切削单晶铜的准连续介质法模拟

吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (02): 352-357.

纳米切削单晶铜的准连续介质法模拟

赵宏伟, 郭文朝, 张霖, 王晓军

吉林大学机械科学与工程学院, 长春 130022

收稿日期:2012-01-11 出版日期:2013-03-01 发布日期:2013-03-01
作者简介:赵宏伟(1976-),男,教授,博士生导师.研究方向:原位力学测试技术与仪器,智能/仿生/精密机械,超精密加工.E-mail:hwzhao@jlu.edu.cn
基金资助:
"863"国家高技术研究发展计划项目(2012AA041206);国家自然科学基金项目(50905073,51275198,51105163);科技部国际合作专项项目(2010DFA72000);吉林省科技发展计划重点项目(20110307).

Quasicontinuum simulation of nanometric cutting of single crystal copper

ZHAO Hong-wei, GUO Wen-chao, ZHANG Lin, WANG Xiao-jun

College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China

Received:2012-01-11 Online:2013-03-01 Published:2013-03-01

摘要/Abstract

摘要： 采用准连续介质多尺度方法模拟了单晶铜的纳米切削过程。分别采用原子位置图和应力分布图对纳米切削过程中局部变形进行描述,得出了模型的切削力-切削距离的响应曲线。从微观角度分析了单晶铜纳米切削过程中材料变形、材料去除机理及内部损伤情况。根据模拟结果,对切削过程中位错形核、演化过程、湮灭消失、切屑及加工表面的形成过程进行了深入的分析。从位错演化的角度解释了切削力与应变能曲线的峰谷变化。提出了纳米切削过程中材料受到刀具的挤压作用而导致位错形核。得出了在纳米切削过程中塑性材料的去除是基于位错运动演化的结论。

关键词: 应用力学, 单晶铜, 纳米切削, 准连续介质法, 切削力, 应变能, 位错演化

Abstract: The nanometric cutting process of the single crystal copper was simulated by the quasi-continuum multi-scale method. The diagrams of atomic positions and stress distributions were used to describe the local deformation in the nanometric cutting process to get the response curve of the cutting force versus cutting distance in the process. The atomic details of material deformation, material removal and internal damage in the process were analyzed microscopically. According to the simulation results, the dislocation nucleation, the evolution process, the vanishment of dislocations, the formations of cutting chips and newly generated surfaces were analyzed deeply in atomic level. The fluctuations of cutting force and strain energy were explained by evolution of dislocation movement. It was concluded that the compression in cutting zone ahead of cutting edge in the nanometric cutting process led to dislocation nucleation, and the removal of plastic material in the process resulted from the evolution of dislocations.

Key words: applied mechanics, single crystal copper, nanometric cutting, quasi-continuum method, cutting force, strain energy, dislocation evolution

中图分类号:

TG501.1

赵宏伟, 郭文朝, 张霖, 王晓军. 纳米切削单晶铜的准连续介质法模拟[J]. 吉林大学学报(工学版), 2013, 43(02): 352-357.

ZHAO Hong-wei, GUO Wen-chao, ZHANG Lin, WANG Xiao-jun. Quasicontinuum simulation of nanometric cutting of single crystal copper[J]. 吉林大学学报(工学版), 2013, 43(02): 352-357.

参考文献

[1] 孙西芝, 陈时锦, 程凯. 基于多尺度仿真方法的单晶铝纳米切削过程研究[J]. 南京理工大学学报:自然科学版, 2008, 32(2): 144-148. Sun Xi-zhi,Chen Shi-jin,Cheng Kai.Multiscale simulation of nanometric cutting of single crystal aluminum[J].Journal of Nanjing University of Science and Technology(Natural Science),2008,32(2):144-148.

[2] Yan J, Strenkowski J. A finite element analysis of orthogonal rubber cutting[J]. Journal of Materials Processing Technology, 2006, 174(1-3):102-108.

[3] Mamalis A G, Horvath M, Branis A S, et al. Finite element simulation of chip formation in orthogonal metal cutting[J]. Journal of Materials Processing Technology, 2001,110(1):19-27.

[4] Simoneau A, Ng E, Elbestawi M A. Chip formation during microscale cutting of a medium carbon steel[J]. International Journal of Machine Tools and Manufacture, 2006,46(5):467-481.

[5] Shi G, Deng X, Shet C. A finite element study of the effect of friction in orthogonal metal cutting[J]. Finite Elements in Analysis and Design,2002,38(9):863-883.

[6] Maekawa K, Itoh A. Friction and tool wear in nano-scale machining—a molecular dynamics approach[J]. Wear, 1995,188(1-2):115-122.

[7] Lin Z C, Huang J C, The influence of different cutting speeds on the cutting force and strain-stress behaviors of single crystal copper during nano-scale orthogonal cutting[J]. Journal of Materials Processing Technology, 2008,201(1-3):477-482.

[8] Komanduri R, Chandrasekaran N, Raff L M. MD simulation of nanometric cutting of single crystal aluminum-effect of crystal orientation and direction of cutting[J]. Wear, 2000,242(1-2): 60-88.

[9] Abraham F F, Gao H J. How fast can crack propagate. Phys Rev Let, 2000, 84(14): 3113.

[10] Tadmor E B, Ortiz M, Phillip S R. Quasicontinuum analysis of defects in solids[J]. Philosophical Magazine A, 1996,73(6):1529-1563.

[11] Heino P, Hakkinen H, Kaski K. Molecular dynamics study of mechanical properties of copper[J]. Europhysics Letters, 1998, 41(3): 273-278.

[12] Prudhomme S, Bauman P T, Oden J T. Error control for molecular statics problems[J]. International Journal for Multiscale Computational Engineering, 2006, 4(5-6): 647-662.

[13] Zhao H W, Zhang L, Zhang P, et al. Influence of geometry in nanometric cutting single-crystal copper via MD simulation[J]. Advanced Materials Research, 2012, 421: 123-128.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed