红旗轿车装饰板左右支柱注射成型过程

吉林大学学报(工学版) ›› 2000, Vol. ›› Issue (2): 86-89.

红旗轿车装饰板左右支柱注射成型过程

孙志斌¹, 梁继才¹, 傅沛福¹, 张政勇², 李义¹

1. 吉林工业大学辊锻工艺研究所, 吉林长春130025;
2. 中国第一汽车集团公司内饰件厂, 吉林长春130052

收稿日期:1999-08-24 出版日期:2000-04-25

A Study on the Injection Molding of Trimming Board for Hong Qi Car

SUN Zhi-bin¹, LIANG Ji-cat¹, FU Pei-fu¹, ZHANG Zheng-yong², LI Yi¹

1. Institute of Roll-forging Technology, Jilin University of Technology, Changchun130025, China;
2. Automotive Plastics Plant of the First Automobile Group Compeny. Changchun130052, China

Received:1999-08-24 Online:2000-04-25

摘要/Abstract

摘要：

借用塑料模CAE分析软件C-MOLD分析了红旗轿车装饰板左右支柱在成型过程中和实际装车中所遇到的问题及其原因,并提出相应的解决办法。

关键词: 注射成型, 计算机辅助分析, C-MOLD, 红旗轿车装饰板左右支柱

Abstract:

With the increasingly extensive applications of plastics in automotive industry, we gradually know that the actual loading conditions are one of the main factors, which we should consider during processing plastic parts. This paper presents one example through the study on the injection molding of trimming board for Hong Qi car, and introduces some methods to solve this problem by use of CAE tools.

Key words: injection molding, CAE, C-MOLD, Hong Qi car'’s trimming board

中图分类号:

TG76

孙志斌, 梁继才, 傅沛福, 张政勇, 李义. 红旗轿车装饰板左右支柱注射成型过程[J]. 吉林大学学报(工学版), 2000, (2): 86-89.

SUN Zhi-bin, LIANG Ji-cat, FU Pei-fu, ZHANG Zheng-yong, LI Yi. A Study on the Injection Molding of Trimming Board for Hong Qi Car[J]. 吉林大学学报(工学版), 2000, (2): 86-89.

参考文献

[1] 蓝玫.高分子物理［M］.西安:西北工业大学出版社,1992.
[2] Advanced CAE Technology Inc. Filling & Post-Filling User guide［Z］. C-MOLD, Ithaca, New York, U.S.A.,1996.
[3] Advanced CAE Technology Inc. Shrinkage & Warpage User Guide［Z］. C-MOLD, Ithaca, New York, U.S.A.,1996.

相关文章 5

[1]	刘东雷, 申长雨, 刘春太, 辛勇, 孙玲. 工艺参数对高光注射成型制品翘曲的宏观影响 [J]. , 2012, (03): 665-671.
[2]	李义，柳承德，梁继才，祁伟，李加成 . 微孔发泡注射成型机理[J]. 吉林大学学报(工学版), 2009, 39(01): 72-77.
[3]	梁继才，周东辉，李义，祁伟，田虎，李婧 . 气辅注射成型制品气泡缺陷形成机理[J]. 吉林大学学报(工学版), 2006, 36(05): 727-0730.
[4]	陈立恒，梁继才，李义，隋忠祥，张景民，徐立晶. FM全新卡车内饰顶棚把手气辅注射成型的模拟分析[J]. 吉林大学学报(工学版), 2005, 35(01): 52-0055.
[5]	梁继才, 李义, 李笑明, 付沛福. 气体辅助注射制品滞留痕缺陷的形成及防治[J]. 吉林大学学报(工学版), 2002, (1): 83-86.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed