吉林大学学报(工学版) ›› 2002, Vol. ›› Issue (1): 12-16.
高青
GAO Qing
摘要: 利用光纤传感器对内燃机缸内燃烧进行了探测,并与以往常规压力传感器的测量结果进行了比较,探索了将光纤传感技术应用于燃烧测量的可行性。利用光强信号可实现同步探测燃烧过程的燃烧时刻、爆震燃烧、循环稳定性、火焰传播及成分分析等多项燃烧特征。图像光纤传感器是未来普及与实现燃烧深层次研究的有效手段。燃烧可视化对燃烧过程测量具有重要意义。
中图分类号:
[1] Remboski D J, .Jr. Pice S L, Martin J K. An optical sensor for spark-ignition engine combustion analysis and control[A]. SAE890159[C], 1989. [2] Nutton D, Pinnock R A. Closed lcop ignition and fueling control using optical combustion sensors[A]. SAE 900486[C]1990. [3] Salat O P, Cheng A S, Cheng W K, et al. Flame shape determination using an optical-fiber spark plug and a head gasker conization probe [A]. ASE941987 [C], 1994. [4] 周剑光,盛凯夫,陆冬生,等.用燃烧过程中自由基的发光强度检测汽油机气缸内的瞬时空燃比[J]内燃机工程,1995,16(3):56~61. |
[1] | 杨帅, 冯志炜, 赵治国, 周毅. 不同米勒循环方式对柴油机工作过程影响的一维模拟分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1444-1454. |
[2] | 唐志刚, 张力, 尚会超, 吕晓惠, 陈曦, 郑仁蔚. 电热塞点火微型内燃机燃烧特性及残余废气对其的影响[J]. 吉林大学学报(工学版), 2017, 47(3): 811-818. |
[3] | 梁金广,于秀敏,高跃,王云开,许楠,于洪洋 . 起动电压对电控柴油机起动性能的影响 [J]. 吉林大学学报(工学版), 2009, 39(02): 315-0320. |
[4] | 梁金广,于秀敏,高跃,于洪洋,李雅群,于晓璐 . 起动结束标志转速、供油量和环境温度 对电控柴油机起动性能的影响[J]. 吉林大学学报(工学版), 2007, 37(05): 1023-1027. |
[5] | 聂建军,杜发荣,高峰 . 存在热漏的内燃机与斯特林联合循环的有限时间的热力学研究[J]. 吉林大学学报(工学版), 2007, 37(03): 518-0523. |
[6] | 程鹏,刘忠长,郭英男,刘金山,谭满志,宫宝利,刘巽俊 . 测量多缸内燃机单缸充气量的流速-压力波方法[J]. 吉林大学学报(工学版), 2007, 37(01): 69-73. |
[7] | 刘金山,郭英男,谭满志,黄为钧,杨立平,高原. 乙醇燃料内燃机均质压燃的工作区域[J]. 吉林大学学报(工学版), 2006, 36(03): 327-0330. |
[8] | 孙剑涛, 刘忠长, 许允, 朱昌吉, 刘巽俊. YC4112ZLQ增压中冷柴油机排气再循环冷却器的设计计算[J]. 吉林大学学报(工学版), 2004, (4): 564-568. |
[9] | 袁兆成, 丁万龙, 方华, 高峥. 排气消声器的边界元仿真设计方法[J]. 吉林大学学报(工学版), 2004, (3): 357-361. |
[10] | 谭满志, 郭英男, 刘金山, 洪伟, 高海润, 吕庆胜. 增压中冷压燃式发动机燃用柴油醇的十三工况排放特性[J]. 吉林大学学报(工学版), 2004, (3): 352-356. |
[11] | 杨晓萍, 洪伟, 赵梅. 天然气发动机自适应控制软件抗干扰设计[J]. 吉林大学学报(工学版), 2004, (3): 348-351. |
[12] | 于秀敏, 李学民, 张建锐, 高跃. 柴油机分配泵电控系统的标定[J]. 吉林大学学报(工学版), 2004, (3): 342-347. |
[13] | 刘忠长, 朱昌吉, 张振东. 车用柴油机排气再循环控制系统[J]. 吉林大学学报(工学版), 2004, (3): 337-341. |
[14] | 吴志军, 李军, 孙济美. 内燃机缸内三维流场测量装置的设计[J]. 吉林大学学报(工学版), 2000, (2): 83-85. |
[15] | 许思传, 张建华, 孙济美. 涡流比对直喷式柴油机缸内湍流流动规律的影响[J]. 吉林大学学报(工学版), 2000, 30(01): 11-15. |
|