吉林大学学报(工学版) ›› 2021, Vol. 51 ›› Issue (2): 747-753.doi: 10.13229/j.cnki.jdxbgxb20191009

• 通信与控制工程 • 上一篇    

一种多导体传输线串扰不确定性问题的计算方法

杨开宇1(),刘伟1,王天皓2(),于显利3,高印寒1,马喜来4   

  1. 1.吉林大学 汽车工程学院,长春 130022
    2.吉林大学 仪器科学与电气工程学院,长春 130026
    3.吉林大学 地球探测科学与技术学院,长春 130026
    4.中国第一汽车股份有限公司 商用车电子电气开发部,长春 130011
  • 收稿日期:2019-11-02 出版日期:2021-03-01 发布日期:2021-02-09
  • 通讯作者: 王天皓 E-mail:yangky@jlu.edu.cn;wangtianhao@jlu.edu.cn
  • 作者简介:杨开宇(1971-),男,副教授,博士.研究方向:汽车电子,电磁兼容及车辆测试技术.E-mail:yangky@jlu.edu.cn
  • 基金资助:
    国家重点研发计划项目(2017YFC0602000);国家自然科学基金项目(51707080);吉林省科技发展计划项目(20180101032JC)

A calculation method for uncertainty of crosstalk in multi⁃conductor transmission line

Kai-yu YANG1(),Wei LIU1,Tian-hao WANG2(),Xian-li YU3,Yin-han GAO1,Xi-lai MA4   

  1. 1.College of Automotive Engineering,Jilin University,Changchun 130022,China
    2.College of Instrument Science and Electrical Engineering,Jilin University,Changchun 130026,China
    3.College of Geo-Exploration Science and Technology,Jilin University,Changchun 130026,China
    4.Commerical Vehicle Institute Electronics Department,FAW Jiefang,Changchun 130011,China
  • Received:2019-11-02 Online:2021-03-01 Published:2021-02-09
  • Contact: Tian-hao WANG E-mail:yangky@jlu.edu.cn;wangtianhao@jlu.edu.cn

摘要:

针对实际问题中传输线对地高度、相对距离和端接阻抗等参数表现出不确定性时的情况,提出了一种多导体传输线串扰不确定性问题的计算方法。该方法首先通过建立参数不确定的多导体传输线模型,依据多导体传输线理论,考虑模型具有安全阈值,结合基于最可能失效点的随机响应面法完成对多导体传输线模型失效概率的计算。通过比较,该方法得到的模型失效概率与蒙特卡罗法的计算结果基本一致,但其计算效率得到了大幅提升,并且能方便地得到模型串扰的统计矩,从而实现对汽车等复杂系统中的线束或电路板微带线等传输线电磁兼容性能的高效准确预测。

关键词: 多导体传输线, 串扰, 随机响应面法, 汽车电子, 电磁兼容

Abstract:

Aiming at the problem that the parameters such as the height, relative distance and termination impedance of the transmission line show uncertainty in the practice, a calculation method for the uncertainty of crosstalk in multi-conductor transmission line is proposed. Firstly, the multi-conductor transmission line model with uncertain parameters is established. Then, according to the multi-conductor transmission line theory, considering that the model has a safety threshold, the random response surface method based on the most likely failure point is used to calculate the failure probability of the multi-conductor transmission line model. By comparison, the failure probability of the model obtained by this method is basically consistent with the calculation result of Monte Carlo method, but its calculation efficiency is greatly improved, and the statistical moment of model crosstalk can be conveniently obtained, so as to realize efficient and accurate prediction of electromagnetic compatibility performance of transmission lines, such as wire harness or circuit board microstrip line in complex systems, such as automobiles.

Key words: multi-conductor transmission line, crosstalk, random response surface method, vehicle electronics, electromagnetic compatibility

中图分类号: 

  • TM930.11

图1

三导体传输线单位长度等效电路"

图2

三导体传输线实际电路模型"

图3

MTL方程计算和CST软件仿真分别得到的固定参数电路模型近端串扰电压"

图4

MCS得到的近端串扰电压曲线"

图5

空间变换及MPP点几何特征"

图6

MPP-SRSM计算步骤"

表1

103~104?Hz频段不同可靠度方法对比"

项目FORMMPP-SRSMMCS
P=(Vmax>10.5 mV)0.01020.00830.0084
计算步骤(函数调用次数)172172+20100000

表2

105~106?Hz频段不同可靠度方法对比"

项目FORMMPP-SRSMMCS
P=(Vmax>103 mV)0.00410.00360.0036
计算步骤(函数调用次数)6969+20100000

图7

MPP-SRSM计算的局部统计矩:均值"

1 Antonini G, Orlandi A, Pignari S A. Review of clayton R. Paul studies on multiconductor transmission lines[J]. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(4): 639-647.
2 Paul C R. Literal solutions for time-domain crosstalk on lossless transmission lines[J]. IEEE Transactions on Electromagnetic Compatibility, 1992, 34(4): 433-444.
3 Mora N, Rachidi F, Pelissou P, et al. Numerical simulation of the overall transfer impedance of shielded spacecraft harness cable assemblies[J]. IEEE Transactions on Electromagnetic Compatibility, 2015, 57(4): 894-902.
4 Lee J, Lee S, Nam S. A crosstalk reduction technique for microstrip MTL using mode velocity equalization[J]. IEEE Transactions on Electromagnetic Compatibility, 2011, 53(2): 366-371.
5 Kechicheb M, Clavel E, Mekideche M R. The MTL method and concept of shading to model automotive wiring having wide and multiple ground planes[C]∥International Conference on Electromagnetics in Advanced Applications,Torino, Italy, 2013:6-15.
6 Zhang J, Xu W, Gao C, et al. Analysis of inter-turn insulation of high voltage electrical machine by using multi-conductor transmission line model[J]. IEEE Transactions on Magnetics, 2013, 49(5): 1905-1908.
7 Huangfu Y P, Rienzo L D, Wang S H. Frequency-dependent multi-conductor transmission line model for shielded power cables considering geometrical dissymmetry[J]. IEEE Transactions on Magnetics, 2017, 54(3): 1-4.
8 Bellan D, Pignari S A, Spadacini G. Characterisation of crosstalk in terms of mean value and standard deviation (multiconductor transmission lines)[J].IEEE Proceedings-Science, Measurement and Technology, 2003, 150(6): 289-295.
9 Gordon C, Roselle K M. Estimating crosstalk in multiconductor transmission lines[J]. IEEE Transactions on Components Packaging & Manufacturing Technology Part B, 2002, 19(2): 273-277.
10 Larbi M, Besnier P, Pecqueux B. Probability of extreme interference levels computed from reliability approaches: Application to transmission lines with uncertain parameters[C]∥International Symposium on Electromagnetic Compatibility, Gothenburg, Sweden, 2014: 648-655.
11 Larbi M, Besnier P, Pecqueux B. Probability of EMC failure and sensitivity analysis with regard to uncertain variables by reliability methods[J]. IEEE Transactions on Electromagnetic Compatibility, 2015, 57(2): 274-282.
12 李永明, 杨娜, 郑亚利, 等. 汽车不均匀线束串扰特性预测的改进方法[J]. 重庆大学学报, 2012, 35(6): 48-52.
Li Yong-ming, Yang Na, Zheng Ya-li, et al.Prediction of crosstalk characterisation in cables bundles[J]. Journal of Chongqing University, 2012, 35(6):48-52.
13 王天皓, 王忠福, 王雨蒙, 等. 基于混沌多项式展开法的线束串扰统计模型[J]. 吉林大学学报: 工学版, 2017, 47(5): 1568-1576.
Wang Tian-hao, Wang Zhong-fu, Wang Yu-meng, et al. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion[J]. Journal of Jilin University (Engineering and Technology Edition), 2017, 47(5): 1568-1576.
14 高印寒, 樊宽刚, 杨开宇, 等. 时域有限差分法在汽车EMC分析中的应用[J]. 吉林大学学报: 工学版, 2009, 39(): 210-214.
Gao Yin-han, Fan Kuan-gang, Yang Kai-yu, et al. Application of finite-difference time-domain in analysis of EMC in automotive[J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(Sup.1): 210-214.
15 Clayton R. Paul. 电磁兼容导论[M]. 闻映红, 译. 北京: 人民邮电出版社, 2007.
16 Rüdiger R, Flessler B. Structural reliability under combined random load sequences[J]. Computers & Structures, 1978, 9(5): 489-494.
17 Mckay M D, Beckman R J, Conover W J. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. Technometrics, 1979, 21(2): 239-245.
[1] 王天皓, 王忠福, 王雨蒙, 杨开宇, 高印寒, 马喜来. 基于混沌多项式展开法的线束串扰统计模型[J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[2] 王天皓, 高印寒, 高乐, 安占扬, 马喜来, 杨开宇. 基于Implicit Wendroff差分格式的汽车线束导线串扰时域瞬态响应分析[J]. 吉林大学学报(工学版), 2017, 47(2): 392-399.
[3] 王世刚, 霍昊达, 王博, 吕源治, 武伟, 张航. 自由立体显示系统中的图像串扰度检测[J]. 吉林大学学报(工学版), 2015, 45(5): 1631-1635.
[4] 高印寒, 安占扬, 王举贤, 王天皓, 刘长英, 张俊东. 等效线束法在汽车线束时域辐射敏感度分析中的应用[J]. 吉林大学学报(工学版), 2015, 45(3): 946-952.
[5] 周逢道,董威,包志强,薛开昶,胡越,孙彩堂. 基于开关电源的三相电磁干扰滤波器[J]. 吉林大学学报(工学版), 2015, 45(1): 216-221.
[6] 高印寒, 王天皓, 杨开宇, 张俊东, 樊宽刚, 朱宇. 汽车线束的动态串扰特性预测[J]. 吉林大学学报(工学版), 2014, 44(5): 1258-1263.
[7] 田丽媛,王庆年,王鹏宇. 双电机混合动力系统FlexRay网络开发[J]. 吉林大学学报(工学版), 2014, 44(3): 585-591.
[8] 李清蓉, 夏军. 立体显示器中的非对称式串扰[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 326-329.
[9] 吕国皎, 王琼华. 全分辨率的低串扰时分复用狭缝光栅3D显示[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 295-298.
[10] 高印寒, 王瑞宝, 马玉刚, 王莹莹, 杨开宇. 汽车线束导线间寄生电容及串扰的解析预测模型[J]. 吉林大学学报(工学版), 2011, 41(增刊1): 144-149.
[11] 安静1,2,武俊峰1,2,吴一辉1. 姿控飞轮电控系统电磁兼容设计[J]. 吉林大学学报(工学版), 2011, 41(4): 998-1003.
[12] 吴定超,高印寒,樊宽刚,王珂. 基于蓝牙技术的汽车手机准备系统电磁辐射抑制[J]. 吉林大学学报(工学版), 2009, 39(06): 1554-158.
[13] 秦政坤,马春生,李德禄,张海明,张大明,刘式墉 . 波导的弯曲对阵列波导光栅传输特性的影响[J]. 吉林大学学报(工学版), 2007, 37(02): 448-0452.
[14] 高印寒,马喜来,陈如娜. 基于模糊推理的汽车电磁兼容预测技术[J]. 吉林大学学报(工学版), 2006, 36(03): 399-0403.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!