吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (1): 166-173.doi: 10.13229/j.cnki.jdxbgxb20161051

• Orginal Article • Previous Articles     Next Articles

Effect of multi-injectionpiezo injector on particulate emission in gasoline direct injection engine

WEI Hai-qiao, PEI Zi-gang, FENG Deng-quan, PAN Jia-ying, PAN Ming-zhang   

  1. State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China
  • Received:2016-09-22 Online:2018-02-26 Published:2018-02-26

RICH HTML

0   

PDF (PC)

294

Abstract: To study the influence of spray strategies on particulate emission, the effect of multi-injection with piezo injector on particulate emission in Gasoline Direct Injection (GDI) engine was studied using Engine Exhaust Particle Size Spectrometer (EEPSS). Experimental results show that, with single injection there are one peak of nucleation mode and two peaks of accumulation mode in particle size distribution. In contrast, with multi-injection, there are two peaks of nucleation mode and one peak of accumulation mode in particle size distribution. Compared with double injection, in triple injection, PN of accumulation mode decreases a lot, and two peaks of nucleation mode increase a bit. Compared with single injection, the total particle number can decrease a lot with appropriate double injection and triple injection, and PN of two modes is also lower. At the same time, double injection can make a big decrease in nucleation mode, while tripe injection results in a big decrease in accumulation mode. Also multi-injection reduces NOx emission.

Key words: power machinery and engineering, piezoelectric injector, multi-injection, gasoline direct injection engine, particulate exhaust, size distribution

CLC Number: 

  • TK417
[1] 王建昕,王志. 高效清洁车用汽油机燃烧的研究进展[J].汽车安全与节能学报,2010,1(3):167-178.
Wang Jian-xin, Wang Zhi.Research progress of high efficient and clean combustion of automative gasoline engine[J].Automotive Safety and Energy, 2010,1(3):167-178.
[2] Königstein A,HocR C,Frensch M,et al.Comparison of advanced turbocharging technologies under steady-state and transient conditions[C]∥SAE Paper,2006-05-0364.
[3] Spicher U, Reissing J, Kech J,et al.Gasoline direct injection (GDI) engines-development potentialities[C]∥SAE Paper,1999-01-2938.
[4] 裴毅强,张建业,秦静,等. 增压直喷汽油机起动怠速及混合气浓度对微粒排放的影响[J]. 天津大学学报:自然科学与工程技术版, 2014, 10(1):892-897.
Pei Yi-qiang, Zhang Jian-ye, Qin Jing,et al.Effect of starting idling condition and mixture concentration of a turbocharged GDI engine on particle emission[J].Journal of Tianjin University(Science and Technology) , 2014, 10(1): 892-897.
[5] Myung C,Park S.Exhaust nanoparticle emissions from internal combustion engines:a review[J]. International Journal of Automotive Technology, 2012, 13(1): 9-22.
[6] Braisher M, Stone R Price P.Particle number emissions from a range of European vehicles[C]∥SAE Paper,2010-01-0786.
[7] 黄雅卿,王志,王建昕.喷油时刻对缸内直喷汽油机颗粒物排放的影响[J].内燃机学报, 2014, 5(1): 420-425.
Huang Ya-qing, Wang Zhi, Wang Jian-xin.Effects of injection timing on particulate emission in gasoline direct injection engine[J].Transactions of CSICE, 2014,5(1): 420-425.
[8] Sabathil D, Koenigstein A, Schaffner P,et al.The influence of DISI engine operating parameters on particle number emissions[C]∥SAE Paper,2011-01-0143.
[9] Whitaker P, Kapus P, Ogris M,et al.Measures to reduce particulate emissions from gasoline DI engines[J]. SAE International Journal of Engines,2011, 4(1): 1498-1512.
[10] Bonandrini G, Di Gioia R, Papaleo D,et al. Numerical study on multiple injection strategies in DISI engines for particulate emission control[C]∥SAE Paper,2012-01-0400.
[11] 黄伟,张玉银,许敏,等.采用两次喷油策略降低直喷增压汽油机爆震和碳烟排放及改善冷起动特性的研究[J].内燃机工程, 2014, 35(2): 48-53.
Huang Wei, Zhang Yu-yin, Xu Min,et al.Improvement of knocking, smoke and HC emissions in cold starting by two stage injection for turbocharged GDI engine[J]. Chinese Internal Combustion Engine Engineering, 2014, 35(2): 48-53.
[12] Schwarz C, Schünemann E, Durst B,at al. Potentials of the spray-guided BMW DI combustion system[C]∥SAE Paper,2006-01-1265.
[13] Martin D, Pischke P,Kneer R.Investigation of the influence of multiple gasoline direct injections on macroscopic spray quantities at different boundary conditions by means of visualization techniques[J]. International Journal of Engine Research,2010, 11(6): 439-454.
[14] Skogsberg M, Dahlander P,Denbratt I.Spray shape and atomization quality of an outward-opening piezo gasoline DI injector[C]∥SAE Paper,2007-01-1409.
[15] Su J, Xu M, Yin P,et al.Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine[C]∥SAE Paper,2014-01-2845.
[16] 潘锁柱, 宋崇林, 裴毅强,等. 点火定时对缸内直喷汽油机燃烧及颗粒物排放的影响[J]. 农业机械学报, 2013, 44(7): 23-27.
Pan Suo-zhu, Song Chong-lin, Pei Yi-qiang, et al.Effects of spark-ignition timing on GDI engine combustion and particle emissions[J].Transactions of the Chinese Society for Agricultural Machinery,2013, 44(7): 23-27.
[1] JIANG Tao,LIN Xue-dong,LI De-gang,YANG Miao,TANG Xue-lin. Effect of control parameters on heat release rate with ANN method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1747-1754.
[2] LIN Xue-dong, JIANG Tao, XU Tao, LI De-gang, GUO Liang. Control strategy of high pressure pump in starting condition of high pressure common rail diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1436-1443.
[3] LI Zhi-jun, WANG Hao, HE Li, CAO Li-juan, ZHANG Yu-chi, ZHAO Xin-shun. Soot distribution features and its influence factors in catalytic diesel particulate filte [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1466-1474.
[4] QIN Jing, XU He, PEI Yi-qiang, ZUO Zi-nong, LU Li-li. Influence of initial temperature and initial pressure on premixed laminar burning characteristics of methane-dissociated methanol flames [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1475-1482.
[5] ZHONG Bing, HONG Wei, JIN Zhao-hui, SU Yan, XIE Fang-xi, ZHANG Fu-wei. Movement characteristics of hydraulic variable valve train with early intake valve closing [J]. 吉林大学学报(工学版), 2018, 48(3): 727-734.
[6] MENG Yu-bo, LI Pi-mao, ZHANG You-tong, WANG Zhi-ming. Inhibition of pressure fluctuation and multi-injection fuel mass deviation in high pressure common rail system [J]. 吉林大学学报(工学版), 2018, 48(3): 760-766.
[7] LI Long, ZHANG You-tong, ZUO Zheng-xing. Application of variable-load control in cylinder pressure control of free-piston engine generator [J]. 吉林大学学报(工学版), 2018, 48(2): 473-479.
[8] TIAN Jing, LIU Zhong-chang, LIU Jin-shan, DONG Chun-xiao, ZHONG Ming, DU Wen-chang. Performance optimization of diesel engine based on response surface methodology of multi-boundary combustion conditions [J]. 吉林大学学报(工学版), 2018, 48(1): 159-165.
[9] LI Zhi-jun, HE Li, JIANG Rui, SHEN Bo-xi, KONG Xiang-jin, LIU Shi-yu. Evaluation of influence of ash distribution on diesel particulate filter pressure drop [J]. 吉林大学学报(工学版), 2017, 47(6): 1760-1766.
[10] YU Liu, LIU Zhong-chang, LIU Jiang-wei, DU Hong-fei, XU Yun. Gasoline direct injection engine spray droplet characteristics [J]. 吉林大学学报(工学版), 2017, 47(5): 1482-1488.
[11] LIU Zhong-chang, TENG Peng-kun, TIAN Jing, XU Yun, QI Sheng-lin, YU Kai-bo. Regulation characteristics of bypass valve of two stage turbocharged diesel engine [J]. 吉林大学学报(工学版), 2017, 47(3): 796-803.
[12] SUN Wen-xu, HONG Wei, XIE Fang-xi, SU Yan, JIANG Bei-ping, LI Xiang-yu. Effects of idle speed and throttle opening on engine shutdown characteristics and realization of direct start mode [J]. 吉林大学学报(工学版), 2017, 47(2): 483-489.
[13] LI Zhi-jun, WANG Nan, ZHANG Li-qiang, HUANG Qun-jin, WEI Suo-ku, ZHANG Yan-ke. Numerical simulation for flow and pressure drop characteristics in asymmetrical channels of diesel particulate filter [J]. 吉林大学学报(工学版), 2016, 46(6): 1892-1899.
[14] SUN Wen-xu, HONG Wei, HUANG En-li, XIE Fang-xi, SU Yan, JIANG Bei-ping. Effect of initial piston position on direct-start mode of gasoline engine without starter [J]. 吉林大学学报(工学版), 2016, 46(5): 1471-1477.
[15] LI Xiao-ping, HONG Wei, XIE Fang-xi, LI Xiang-yu, YANG Wen-hai, DAI Zhi-yao. NOx emission reduction of a lean-burn methanol engine by retarding ignition timing, exhaust gas recirculation and leaner air/fuel mixture [J]. 吉林大学学报(工学版), 2016, 46(5): 1478-1483.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd