吉林大学学报(工学版) ›› 2000, Vol. 30 ›› Issue (02): 1-5.

• paper •     Next Articles

Computer Actualization of the Section Geometry Contour of Pneumatic Tire

WANG Qing-nian, ZHAO Zi-liang, LI You-de, LI Jie, CHU Liang   

  1. College of Automobile Engineering, Jilin University of Technology, Changchun130025, China
  • Received:1999-10-30 Online:2000-04-25 Published:2000-04-25

PDF (PC)

365

Abstract:

The basic formulae of tire equilibrium inside contour and the parameters of tire outside contour ascertained by means of calculation and selection are applied to realize the computer creating of the tire geometry contour by computer program in this paper. The calculation results of this program are accurate.reliable and good visualization comparied with real tire contour, which can be applied to automatically generate the geometry contour of various tire and supply convenience for the research of the tire temperature filed afterwards. At the same time, Key words calculation is also done to analyze the relation between tire structural parameters (namely tire outside diameter.section width etc.) and the section contour of a tire, which provides the references to design tire.

Key words: tire, section geometry contour, computer generating, structural parameters

CLC Number: 

  • U461.5


[1] 叶可舒.高速公路的发展为轮胎敲响了警钟-轮胎的高速性能急需提高［J］ 轮胎工业,1991(9):25-30.

[2] 王家青.从高速公路交通事故谈加强汽车维护工作［J］. 汽车维修,1997 (4):43-47.

[3] 赵子亮.高速滚动汽车轮胎温度场的研究［D］ 长春:吉林工业大学汽车工程学院,1998.

[4] 李杰,王庆年,赵子亮.国产货车轮胎高速滚动时脱层与爆裂机理的分析及预防研究报告［R］. 长春:吉林工业大学汽车工程学院,1998.

[5] 张士齐.轮胎力学与热学［M］. 北京:化学工业出版社,1988.

[6] 郑正仁、黄崇期.汽车轮胎制造与测试［M］. 北京:化学工业出版社,1987.

[7] 轮胎结构学习班.轮胎结构设计程序与计算方法(草案)［J］.橡胶工业,1974(4):4-7.

[8] 王华. Visual C++6.0 编程实例与技巧［M］. 北京:机械工业出版社,1999
[1] HE Ji-lin, CHEN Yi-long, WU Kang, ZHAO Yu-ming, WANG Zhi-jie, CHEN Zhi-wei. Energy flow analysis of crane hoisting system and experiment of potential energy recovery system [J]. 吉林大学学报(工学版), 2018, 48(4): 1106-1113.
[2] TIAN Yan-tao, ZHANG Yu, WANG Xiao-yu, CHEN Hua. Estimation of side-slip angle of electric vehicle based on square-root unscented Kalman filter algorithm [J]. 吉林大学学报(工学版), 2018, 48(3): 845-852.
[3] HE Xiang-kun, JI Xue-wu, YANG Kai-ming, WU Jian, LIU Ya-hui. Tire slip control based on integrated-electro-hydraulic braking system [J]. 吉林大学学报(工学版), 2018, 48(2): 364-372.
[4] LI Jia-qi, NI Ji-min, GAO Xu-nan, SHI Xiu-yong, XU Xiao-chuan. Analysis of lubrication performance of floating ring bearing considering radial temperature gradient [J]. 吉林大学学报(工学版), 2017, 47(6): 1782-1790.
[5] WANG Guo-lin, SHEN Fei, ZHOU Hai-chao, YANG Jian. Evaluation of tyre pumping noise and design of low noise structure [J]. 吉林大学学报(工学版), 2017, 47(4): 1024-1031.
[6] WANG Guo-lin, SUN Yan-tian, LIANG Chen, YANG Jian, ZHOU Hai-chao. Contour design of radial tire based on full stress theory [J]. 吉林大学学报(工学版), 2017, 47(2): 365-372.
[7] ZHANG Jia-xu, LI Jing. Parameter identification for UniTire model based on hybrid optimization method [J]. 吉林大学学报(工学版), 2017, 47(1): 15-20.
[8] ZHANG Yi-hua, XU Hong-guo, LIU Hong-fei. Transient rollover state of tractor and double trailer combination based on Trucksim [J]. 吉林大学学报(工学版), 2016, 46(4): 1065-1069.
[9] YANG Yi-yang, XU Nan, GUO Kong-hui, CHEN Ping. Application of hydroplaning mechanism in high-speed steel trip tire test rig [J]. 吉林大学学报(工学版), 2016, 46(1): 1-7.
[10] MA Biao, ZHAO Jia-xin, LI He-yan, NING Ke-yan, HE Chun-ping. Effect of clutches' structural parameters on thermalelastic instability [J]. 吉林大学学报(工学版), 2014, 44(4): 933-938.
[11] ZHENG Hong-yu, CHEN Guo-ying, SUN Lin-lin, KONG Fan-sen, HE Lei, ZONG Chang-fu. Tire-road friction coefficient estimation based on steer-by-wire system [J]. 吉林大学学报(工学版), 2014, 44(2): 292-295.
[12] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems [J]. 吉林大学学报(工学版), 2013, 43(03): 607-612.
[13] WANG Guo-lin, FU Nai-ji, ZHANG Jian, PEI Zi-rong. Simulation of the radial tire curing process based on K-R kinetic model [J]. 吉林大学学报(工学版), 2013, 43(03): 659-664.
[14] MA Bin, XU Hong-guo, LIU Hong-fei. Effects of road surface fractal and rubber characteristics on tire sliding friction factor [J]. 吉林大学学报(工学版), 2013, 43(02): 317-322.
[15] LIU Tao, GUO Kong-hui. Driver model used in vehicle tire blow-out simulation [J]. , 2012, 42(05): 1077-1082.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd