吉林大学学报(工学版) ›› 2000, Vol. 30 ›› Issue (02): 6-9.

• paper • Previous Articles     Next Articles

Numerical Simulation Research of Automotive Flow-field and Trailing Vortices

FU Li-min, SHEN Jun, WANG Jing-yu   

  1. National Key Lab of Automobile Dynamic Simulation, Jinn University of Technology, Changchun130025, China
  • Received:1999-05-15 Online:2000-04-25 Published:2000-04-25

PDF (PC)

458

Abstract:

This paper does numerical simulation research of RED-FLAG CA774 and gets the structure of whole outer flow-field and trailing vortices. The authors successfully simulate the appearance of flow separation and towing vortices, and on the basis of numerical simulation, discuss flowing state of vertical and horizontal flow, wake vortices structure and the mechanism of flow separation, formation and development of trailing vortices. The results of numerical simulation, compared with test results, are verified correctly.

Key words: CFD, numerical simulation, structure of wake, trailing vortices

CLC Number: 

  • U461.1


[1] 傅立敏.汽车空气动力学［M］.北京:机械工业出版社,1998.

[2] Cogotti A. Car-wake imaging a seven-hole probe［A］, SAE 860214［C］,1986:145-148

[3] Addel A F. An investigation into the aerodynamics of the etemal flow around a bus (Daewoo Model)［A］. SAE 962173［C］,1996:73-76

[4] 傅立敏.降低国产轿车阻力的风洞试验研究［J］.空气动力学学报,1998,16(2):147-153.

[5] 傅立敏.轿车三维分离流动特性的研究［J］汽车工程,1998, 26(6), 338-342.
[1] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[2] GONG Ya-feng, WANG Bo, WEI Hai-bin, HE Zi-heng, HE Yu-long, SHEN Yang-fan. Surface subsidence law of double-line shield tunnel based on Peck formula [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1411-1417.
[3] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[4] SUN Zheng, HUANG Yu-qi, YU Xiao-li. Numerical simulation of flow and heat transfer in journal bearing lubrication [J]. 吉林大学学报(工学版), 2018, 48(3): 744-751.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[7] FU Wen-zhi, LIU Xiao-dong, WANG Hong-bo, YAN De-jun, LIU Xiao-li, LI Ming-zhe, DONG Yu-qi, ZENG Zhen-hua, LIU Gui-bin. Multi-point forming process of 1561 aluminum alloy surfaces [J]. 吉林大学学报(工学版), 2017, 47(6): 1822-1828.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] WANG Hong-chao, SHAN Xi-zhuang, YANG Zhi-gang. Numerical simulation of the influence of ground effect simulation on vehicle cooling system experiment in climate wind tunnel [J]. 吉林大学学报(工学版), 2017, 47(5): 1373-1378.
[10] WANG Guo-lin, SHEN Fei, ZHOU Hai-chao, YANG Jian. Evaluation of tyre pumping noise and design of low noise structure [J]. 吉林大学学报(工学版), 2017, 47(4): 1024-1031.
[11] PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators [J]. 吉林大学学报(工学版), 2017, 47(3): 804-810.
[12] KOU Shu-qing, SONG Wei-feng, SHI Zhou. Fracture splitting simulation and defect analysis of 36MnVS4 connecting rod [J]. 吉林大学学报(工学版), 2017, 47(3): 861-868.
[13] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[14] WAN Ying, ZHAO Wei-qiang, FENG Ran, LING Jin-peng, ZONG Chang-fu, ZHENG Hong-yu. Dynamic modeling and vehicle-liquid coupling characteristic analysis for tank trucks [J]. 吉林大学学报(工学版), 2017, 47(2): 353-364.
[15] ZHANG Peng, KOU Shu-qing, ZHAO Yong, LIN Bao-jun. Ananlsis of three rollers axial knurling process of assembled camshaft [J]. 吉林大学学报(工学版), 2016, 46(6): 1953-1960.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd