吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (6): 1953-1960.doi: 10.13229/j.cnki.jdxbgxb201606026

Previous Articles     Next Articles

Ananlsis of three rollers axial knurling process of assembled camshaft

ZHANG Peng, KOU Shu-qing, ZHAO Yong, LIN Bao-jun   

  1. Roll Forging Institute, Jilin University,Changchun 130022,China
  • Received:2015-09-08 Online:2016-11-20 Published:2016-11-20

PDF (PC)

232

Abstract: The three rollers axial knurling process of assembled camshaft is investigated by experiment and numerical simulation, including the distributions of stress and strain and their changes on the surface of the tube, the formation process of tooth profile of the tube, the effect of parameter of knurling tools on the tools' load, the assembly interference quantity, the press-fit and torsional strength. Results show that the tooth profile formed by three point knurling technology is complete and satisfactory, and the metal can flow sufficiently, and the stress does not exceed the material failure stress. The tooth height and addendum angle are important factors in determining the tool loading, assembly interference quantity, press-fit and torsional strength. The simulation and experimental results are in good agreement, which can provide a reliable reference for the selection of axial knurling process parameters.

Key words: mechanical manufacturing process and equipment, assembled camshaft, axial knurling, numerical simulation, press-fit, static torsional strength

CLC Number: 

  • TG302
[1] 寇淑清,杨慎华,赵勇,等. 发动机装配式凸轮轴-极具竞争力的新技术[J]. 中国机械工程, 2004,15(6):474-477.
Kou Shu-qing, Yang Shen-hua, Zhao Yong, et al. Engine assembled camshafts-competitive technologies for camshaft manufacture[J]. China Mechanical Engineering,2004,15(6):474-477.
[2] Qiao J, Kou S Q, He D Y, et al. Torque strength and influencing factors analysis for assembled camshaft by knurling joining[J]. Materials Science Forum,2008(575-578):216-221.
[3] Meusburger P, Weissenhorn H,Geiger R. The Thyssen-Krupp Presta assembly process, the basis of the assembled camshaft[DB/OL].[2015-08-29]. https://www.docin.com/p-309507770.html.
[4] Chen Jia-ting, Yang Lian-fa. State-of-the-art of joining technologies for assembled camshaft[C]∥Advanced Materials Research, Switzerland, 2012:2118-2122.
[5] Zhang P, Kou S Q, Zhu H, et al. Analysis for transverse knurling process of the assembled camshaft[C]∥Applied Mechanics and Materials, Switzerland,2014:485-489.
[6] 刘志奇,宋建丽,李永堂,等. 渐开线花键冷滚压精密成形工艺分析及试验研究[J]. 机械工程学报,2011,47(14):32-38.
Liu Zhi-qi,Song Jian-li,Li Yong-tang, et al. Analysis and experimental study on the precision cold rolling process of involute spline[J]. Journal of Mechanical Engineering,2011,47(14):32-38.
[7] 机械设计手册编委会.中国机械设计手册[M]. 北京:机械工业出版社, 2004.
[8] Huang B M, Yang J R, Yen H W, et al. Secondary hardened bainite[J]. Materials Science and Technology,2014,30(9):1014-1023.
[9] Straffelini G, Benedetti M, Fontanari V. Damage evolution in sinter-hardening powder-metallurgy steels during tensile and fatigue loading[J]. Materials and Design,2014,61:101-108.
[10] Zhang P, Kou S, Lin B, et al. Optimization for radial knurling connection process of assembled camshaft using response surface method[J]. The International Journal of Advanced Manufacturing Technology, 2015,77(1-4):653-661.
[11] Blanchard P, Nigarura S, Trasorras J R L, et al. Assembled camshaft with sintered cam lobes: torsional fatigue strength and wear performance[C]∥SAE Technical Paper, 2000-01-0397.
[1] GUO Hao-tian,XU Tao,LIANG Xiao,YU Zheng-lei,LIU Huan,MA Long. Optimization on thermal surface with rib turbulator inspired by turbulence of alopias' gill in simplified gas turbine transition piece [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1793-1798.
[2] GONG Ya-feng, WANG Bo, WEI Hai-bin, HE Zi-heng, HE Yu-long, SHEN Yang-fan. Surface subsidence law of double-line shield tunnel based on Peck formula [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1411-1417.
[3] QIU Yan-kai, LI Bao-ren, YANG Gang, CAO Bo, LIU Zhen. Characteristics and mechanism reducing pressure ripple of hydraulic system with novel hydraulic muffler [J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[4] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[5] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[6] FU Wen-zhi, LIU Xiao-dong, WANG Hong-bo, YAN De-jun, LIU Xiao-li, LI Ming-zhe, DONG Yu-qi, ZENG Zhen-hua, LIU Gui-bin. Multi-point forming process of 1561 aluminum alloy surfaces [J]. 吉林大学学报(工学版), 2017, 47(6): 1822-1828.
[7] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[8] WANG Hong-chao, SHAN Xi-zhuang, YANG Zhi-gang. Numerical simulation of the influence of ground effect simulation on vehicle cooling system experiment in climate wind tunnel [J]. 吉林大学学报(工学版), 2017, 47(5): 1373-1378.
[9] WANG Guo-lin, SHEN Fei, ZHOU Hai-chao, YANG Jian. Evaluation of tyre pumping noise and design of low noise structure [J]. 吉林大学学报(工学版), 2017, 47(4): 1024-1031.
[10] PENG Wei, LI Guo-xiang, YAN Wei. Improvement in wall functions for engine radiators [J]. 吉林大学学报(工学版), 2017, 47(3): 804-810.
[11] KOU Shu-qing, SONG Wei-feng, SHI Zhou. Fracture splitting simulation and defect analysis of 36MnVS4 connecting rod [J]. 吉林大学学报(工学版), 2017, 47(3): 861-868.
[12] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[13] YUAN Zhe, XU Dong, LIU Chun-bao, LI Xue-song, LI Shi-chao. Strength analysis of hydraulic retarder blade based on the process of thermal-fluid structure interaction [J]. 吉林大学学报(工学版), 2016, 46(5): 1506-1512.
[14] CHENG Yan-yan, LI Ming-zhe, XING Jian. Effect of unit form on flexible stretch forming of multi-point die [J]. 吉林大学学报(工学版), 2016, 46(5): 1552-1557.
[15] YUAN Zhe, ZHOU Qian-qian, LIU Chun-bao, MA Wen-xing, XU Zhi-xuan. Blade design and aerodynamics of MW wind turbine based on BEM theory [J]. 吉林大学学报(工学版), 2016, 46(4): 1142-1148.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Guo-lin, FU Nai-ji, ZHANG Jian, PEI Zi-rong. Simulation of the radial tire curing process based on K-R kinetic model[J]. 吉林大学学报(工学版), 2013, 43(03): 659 -664 .
[2] CHI Xue-fen, WU Di, LIU Dan. IBP+MMBP/Geo/1/K vacation queuing system with threshold[J]. 吉林大学学报(工学版), 2013, 43(03): 781 -787 .
[3] LONG Xue-qin, GUAN Hong-zhi, QIN Huan-mei. Self-organization of hierarchies of urban roads based on efficiency and safety[J]. 吉林大学学报(工学版), 2013, 43(05): 1222 -1229 .
[4] ZONG Fang, ZHANG Yi-shan, WANG Zhan-zhong, LI Zhi-yao. Parking pricing analysis in urban central business district[J]. 吉林大学学报(工学版), 2013, 43(05): 1235 -1240 .
[5] ZHAO Wei, SUN Han-xu, JIA Qing-xuan, ZHANG Yan-heng, YU Tao. Mechanical analysis and optimal design of a new spherical mobile robot with two moving modes[J]. 吉林大学学报(工学版), 2013, 43(05): 1386 -1394 .
[6] WANG Sheng-man. Stretch bend forming defects of stainless steel profiles of metro vehicles[J]. 吉林大学学报(工学版), 2013, 43(06): 1546 -1550 .
[7] LU Chuan-guo, FENG Xin-xi, KONG Yun-bo, ZHANG Di. Data association for multi-passive-sensor system based on Kullback-Leibler divergence[J]. 吉林大学学报(工学版), 2013, 43(06): 1696 -1701 .
[8] KUI Hai-lin,WANG Hai-zhou,NI Wei-xin,CHEN Yun-feng,LI Jun. Flow characteristics in diesel helical intake port bionic with non-smooth surface[J]. 吉林大学学报(工学版), 2014, 44(3): 668 -674 .
[9] SUN Da-xu, LAN Feng-chong, HE Xing-fu, CHEN Ji-qing. Self-adaptive composite ABS of dual-motor four-wheel drive electric vehicle[J]. 吉林大学学报(工学版), 2016, 46(5): 1405 -1413 .
[10] LI Hui, WANG Yan-jiang, LIU Bao-di, LIU Wei-feng, WANG Xiao-meng. Extraction algorithm of salient object by fast dictionary learning and feature rarity[J]. 吉林大学学报(工学版), 2016, 46(5): 1710 -1717 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd