吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (6): 1669-1676.doi: 10.13229/j.cnki.jdxbgxb201706001

• Orginal Article •     Next Articles

Fluid-induced vibration and flow mechanism of automotive external rearview mirror

WANG Jing-yu1, YU Xu-tao2, HU Xing-jun1, GUO Peng2, XIN Li2, GUO Feng2, ZHANG Yang-hui2   

  1. 1.State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,China;
    2.College of Automotive Engineering,Jilin University,Changchun 130022,China
  • Received:2016-08-04 Online:2017-11-20 Published:2017-11-20

RICH HTML

1   

PDF (PC)

350

Abstract: Based on fluid-solid interaction method, simulation analysis of the flow around the external rearview mirror was carried out to investigate the mechanism of fluid-induced vibration, and the main vibration forms were described. First, the rigid external rearview mirror model was investigated to get the drag coefficient Cd, and lift coefficient Cl, which provide a comparison basis for the study of fluid-induced vibration and verify the feasibility of the simulation program. Then, the flow around the external rearview mirror was simulated by numerical method to investigate the vibration characteristics of the mirror under different velocities. The changes of the drag and lift coefficients, vibration amplitude, frequency of vortex shedding and other parameters with the velocity were obtained. Results show that strong vibration of the mirror occurs when the vertex shedding frequency is approach to the structural natural frequency of the external rearview mirror, and the vibration strength is far greater than the impact strength of the wind.

Key words: vehicle engineering, rearview mirror, fluid-solid interaction, vehicle aerodynamics, vortex-induced vibration, finite element method

CLC Number: 

  • U461.1
[1] Horinouchi N, Kato Y, Kondoh T, et al. Development of estimation technique for flow induced vibration on external rearview mirror[C]∥SAE Technical Paper, 2003-01-2815.
[2] 兰靛靛,张军,黄建,等. 基于实验模态分析的外后视镜结构动态修改[J]. 噪声与振动控制, 2008, 28(5): 120-121.
Lan Dian-dian, Zhang Jun, Huang Jian, et al. Dynamic improvement of exterior rear-view mirror structure based on experimental modal analysis[J]. Noise and Vibration Control, 2008,28(5):120-121.
[3] 李启良,杨志刚,陈枫. 汽车后视镜流场的试验和数值研究[J]. 同济大学学报:自然科学版,2011,39(7):43-46.
Li Qi-liang, Yang Zhi-gang, Chen Feng. Experimental and numerical investigations of flow field of automotive rear view mirror[J]. Journal of Tongji University(Natural Science),2011,39(7):43-46.
[4] 杨博,胡兴军,张英超. 汽车后视镜区域非定常流场与气动噪声研究[J]. 机械工程学报,2010,46(22):151-155.
Yang Bo, Hu Xing-jun, Zhang Ying-chao. Study on unsteady flow field and aerodynamic noise of the automobile rear view mirror region[J]. Journal of Mechanical Engineering,2010,46(22):151-155.
[5] Homsi E, Narain M. Vibration control of body-mounted plastic mirror design[C]∥SAE Technical Paper, 982312.
[6] Xiong C C, Chen H Y, Fan Z. Wind-induced vibration of the rear-view mirrors of car at high speed[C]∥Applied Mechanics and Materials, Xiamen,China,2014:63-67.
[7] Watkins S. On the causes of image blurring in external rear view mirrors[C]∥SAE Technical Paper, 2004-01-1309.
[8] 胡世良,鲁传敬,何友声. 平板流固耦合振动的数值分析[J]. 上海交通大学学报,2013,47(10):1487-1493,1502.
Hu Shi-liang, Lu Chuan-jing, He You-sheng. Numerical analysis of fluid-structure interaction vibration for plate[J]. Journal of Shanghai Jiaotong University,2013,47(10):1487-1493,1502.
[9] Yang Y, Gu M, Chen S Q, et al. New inflow boundary conditions for modeling the neutral equilibrium atmospheric boundary layer in computational wind engineering[J]. Journal of Wind Engineering and Industrial Aerodynamics,2009,97(2):88-95.
[10] 高宏范.基于ABAQUS的后视镜振动性能分析研究及试验设计[D]. 镇江:江苏大学汽车与交通工程学院,2012.
Gao Hong-fan. Vibration performance analysis and experiment design of rear-view mirror based on ABAQUS[D]. Zhenjiang:School of Automotive and Traffic Engineering,Jiangsu University,2012.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] BI Qiu-shi,WANG Guo-qiang,HUANG Ting-ting,MAO Rui,LU Yan-peng. Tooth strength analysis of mineral sizer by coupling discrete element method and finite element method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1770-1776.
[7] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[8] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[9] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[10] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[11] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[12] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[13] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[14] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[15] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd