Journal of Jilin University(Engineering and Technology Edition) ›› 2018, Vol. 48 ›› Issue (5): 1426-1435.doi: 10.13229/j.cnki.jdxbgxb20171065

Previous Articles     Next Articles

Finite element analysis of hysteretic behavior of square steel tube confined steel reinforced concrete column steel frame ring beam joint

DAI Yan1,2, NIE Shao-feng1, ZHOU Tian-hua1   

  1. 1.School of Civil Engineering, Chang'an University, Xi'an 710061,China;
    2.Xi'an Traffic Construction Quality Supervision Station, Xi'an 710065, China
  • Received:2018-03-05 Online:2018-09-20 Published:2018-12-11

Abstract: Two kinds of different shapes of steel square tube confined steel reinforced concrete column steel frame ring beam joint were designed. ABAQUS finite element software was used to establish the numerical analysis model of the node. The hysteretic behavior, stress distribution and failure mode of the joints were analyzed. The influences of the outer diameter thickness ratio of steel tube, steel form, joint height, concrete strength and axial compression ratio on the seismic performance of the nodes were also investigated. The results show that the hysteresis curves of this kind of node are full and the energy dissipation is good, the steel distribution and failure mode are in accordance with the requirement of "strong column, weak beam and stronger joint" in seismic design. This study provides theoretical support for the design and research of this kind of nodes.

Key words: structure engineering, steel tube confined steel reinforced concrete columns, hysteretic behavior, ring beam, skeleton curve, stress distribution

CLC Number: 

  • TU398
[1] 周绪红,刘界鹏,张素梅.方钢管约束型钢混凝土短柱抗震性能试验研究[J].建筑结构学报,2010,31(7):49-55.
Zhou Xu-hong, Liu Jie-peng, Zhang Su-mei.Experimental study on seismic behavior of square steel tube confined steel reinforced concrete short columns[J].Journal of Architectural Structure,2010,31(7):49-55.
[2] 刘界鹏,张小冬,张素梅.圆钢管约束钢骨高强混凝土短柱轴压力学性能[J].建筑结构学报,2009,30(增刊2):242-248.
Liu Jie-peng, Zhang Xiao-dong, Zhang Su-mei.Axial compression behavior of circular steel tube confined steel reinforced high strength concrete short columns[J].Journal of Architectural Structure,2009,30(Sup.2):242-248.
[3] Zhou Xu-hong,Liu Jie-peng.Seismic behavior and strength of tubed steel reinforced-concrete short columns[J].Journal of Constructional Steel Research,2010,66(1):28-36.
[4] 陈庆军,蔡健,杨平,等.节点区柱钢管不全贯通式钢管混凝土柱-梁节点抗震性能[J].土木工程学报,2009,42(12):33-42.
Chen Qing-jun, Cai Jian, Yang Ping, et al.Seismic behavior of concrete filled steel tubular column-beam joints with discontinuous column tubes[J].China Civil Engineering Journal,2009,42(12):33-42.
[5] 陈庆军,蔡健,徐刚,等.节点区柱钢管不连通式钢管混凝土柱-梁节点轴压承载力[J].工程力学,2008,25(9):170-175.
Chen Qing-jun, Cai Jian, Xu Gang, et al.The axial compression bearing capacity of the concrete filled steel tubular column-beam joint with column tube discontinuous in joint zone[J].Engineering Mechanics, 2008,25(9):170-175.
[6] Nie J G,Bai Y,Cai C S.New connection system for confined concrete columns and beams. Ⅰ:experimental study[J]. Journal of Structural Engineering,2008,134(12):1787-1799.
[7] Bai Y,Nie J G,Cai C S.New connection system for confined concrete columns and beams. Ⅱ:theoretical modeling[J].Journal of Structural Engineering,2008,134(12):1800-1809.
[8] 张玉芬,王育平,赵均海.复式钢管混凝土外钢管不连通环梁节点抗震性能试验研究[J].土木工程学报,2012,45(6):90-100.
Zhang Yu-fen, Wang Yu-ping, Zhao Jun-hai.Experimental study on the seismic behavior of ring beam joint with discontinuous outer tube outside composite CFST column[J].China Civil Engineering Journal,2012,45(6):90-100.
[9] Zhang Y F,Zhao J H, Cai C S.Seismic behavior of ring beam joints between concrete-filled twin steel tubes columns and reinforced concrete beams[J].Engineering Structures,2012,39:1-10.
[10] 周绪红,刘界鹏.钢管约束混凝土柱的性能与设计[M].北京:科学技术出版社,2010.
[11] 甘丹. 钢管约束混凝土短柱的静力性能与抗震性能研究[D].兰州:兰州大学土木工程与力学学院,2012.
Gan Dan.Study on static and seismic behavior of steel tube confined concrete short columns[D].Lanzhou: College of Civil Engineering and Mechanics, Lanzhou University, 2012.
[12] GB50010—2010.混凝土结构设计规范[S].
[13] GB50017—2017.钢结构设计规范[S].
[14] Baltay P, Gjelsvik A.Coefficient of friction for steel on concrete at high normal stress[J]. Journal of Materials in Civil Engineering,1990,2(1):46-49.
[15] JGJ/T101—2015.建筑抗震试验规程[S].
[16] 唐九如. 钢筋混凝土框架节点抗震[M].南京:东南大学出版社,1989.
[17] GB50011—2010.建筑抗震设计规范[S].
[1] YIN Zi-hong, ZHU Bo, SHAO Guo-xia, KONG De-hui, JIANG Liang-wei. Response of railway track and subgrade under the effect overweight goods [J]. 吉林大学学报(工学版), 2017, 47(5): 1446-1452.
[2] WANG Shao-jie, XU Zhao-dong, LI Shu, WANG Kai-yang, Dyke Shirley J. Differential settlement identification of pier for continuous beam based on strain monitoring [J]. 吉林大学学报(工学版), 2016, 46(4): 1090-1096.
[3] LAN Feng-chong, LI Zhong-chao, ZHOU Yun-jiao, CHEN Ji-qing. Stress distribution and strength prediction of aluminum-magnesium alloy adhesive-bonded single-lap joints [J]. 吉林大学学报(工学版), 2015, 45(3): 726-732.
[4] ZHANG Lin, ZHAO Hong-wei, YANG Yi-han, MA Zhi-chao, HUANG Hu, MA Zhi-chao. Molecular dynamics simulation of nanoindentation of single-layer graphene sheet [J]. 吉林大学学报(工学版), 2013, 43(06): 1558-1565.
[5] LI Cheng, ZHU Hong-hong, TIE Ying, HE Long. Stress distribution and load sharing in single-lap bonded/bolted joints [J]. 吉林大学学报(工学版), 2013, 43(04): 933-938.
[6] Li Cheng, Liu Zhi-hua, Zhang Ping . Analysis on stress and displacement of a composite flywheel composed of twolayer rotor with pre-displacement [J]. 吉林大学学报(工学版), 2007, 37(04): 828-832.
[7] Wang Tie-cheng, Li Xin-hua,Wang Tian-zhu,Kang Gu-yi . Hysteretic behavior of frame with specially shaped columns subjected to cyclic loading [J]. 吉林大学学报(工学版), 2007, 37(01): 224-228.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] HE Lei,ZONG Chang-fu,TIAN Cheng-wei,WU Ren-jun,Zhang Tai-wu. DC motor fault diagnosis and fault tolerance control method for steer-by-wire car[J]. 吉林大学学报(工学版), 2011, 41(03): 608 -612 .
[2] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[3] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[4] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[5] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[6] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[7] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[8] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[9] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[10] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .