›› 2012, Vol. ›› Issue (06): 1360-1365.

Previous Articles     Next Articles

Shift quality assessment and optimization of dual-clutch transmission

LIU Hong-bo1, LEI Yu-long1, ZHANG Jian-guo2, JIN Lun3, LI You-de1   

  1. 1. State Key Laboratory of Automobile Simulation and Control, Jilin University, Changchun 130022, China;
    2. Department of Mechanical Engineering, Armor Technique Institute of PLA, Changchun 130117, China;
    3. R&D Center, United Automotive Electronics System Co., Ltd., Shanghai 201206, China
  • Received:2011-09-29 Online:2012-11-01

PDF (PC)

461

Abstract: The shift quality assessment indexes of the dual-clutch transmission(DCT) were defined in detail from the aspect of control. A DCT vehicle model was built using MATLAB/Simulink tools. A shift quality assessment system was designed. Through the co-simulation of the vehicle model and the assessment system, the DCT shift quality control targets, namely the expected control range of each assessment index was defined, providing the reference and guidance for the shift control strategy and algorithm. Taking the highest level of shift quality assessment as the target function, using the multi-target optimization method of the genetic algorithm, the control strategy of the clutch switch timings during the torque phase and the inertia phase was optimized, and the optimal solution sets of the clutch engaging and disengaging speeds were optimized. Based on the co-simulation platform of DCT vehicle model and assessment system, the simulation results on shift quality before and after the optimization were abtained. The vehicle test results showed that both the proposed shift control strategy and control algorithm are correct, they can improve the shift quality of DCT.

Key words: vehicle engineering, dual-clutch transmission(DCT), shift quality assessment, genetic algorithm

CLC Number: 

  • U463.2
[1] Bernd M. Double clutch transmissions lessons learned and future potential[C]//SAE Paper,2005-01-1021.
[2] 秦大同,刘永刚,胡建军,等.双离合器式自动变速器两离合器起步控制与仿真[J].机械工程学报,2010(18):121-126. Qin Da-tong,Liu Yong-jian,Hu Jian-jun,et al.Control and simulation of launch with two clutches for dual clutch transmissions[J]. Journal of Mechanical Engineering,2010(18):121-126.
[3] Goetz M, Levelsley M C, Crolla D A. Integrated powertrain control of gearshifts on twin clutch transmissions[C]//SAE Paper,2004-01-1637.
[4] 王健,雷雨龙,郭孔辉,等.车辆换档质量概念的完善与评价[J].吉林大学学报:工学版,2007,37(5):1014-1018. Wang Jian, Lei Yu-long, Guo Kong-hui,et al. Concept improvement and assessment on vehicle gear shift quality[J]. Journal of Jilin University(Engineering and Technology Edition),2007,37(5):1014-1018.
[5] Wang Jian, Guo Kong-hui, Lei Yu-long, et al. Support vector machine theory based shift quality assessment for automated mechanical transmission[C]//SAE Paper, 2007-08-1558.
[6] Zhang Jian-guo,Lei Yu-long, Zong Chang-fu,et al. Shift quality evaluation system based on neural network for DCT vehicles[C]//Sixth International Conference on Natural Computation, Yantai, China, 2010:4267-4271.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] WU Wei-nan,CUI Nai-gang,GUO Ji-feng,ZHAO Yang-yang. Distributed integrated method for mission planning of heterogeneous unmanned aerial vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1827-1837.
[7] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[8] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[9] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[10] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[11] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[12] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[13] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[14] JIAO Yu-ling, ZHANG Peng, TIAN Guang-dong, XING Xiao-cui, ZOU Lian-hui. Slotting optimization of automated warehouse based on multi-population GA [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1398-1404.
[15] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd