吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 202-206.

Previous Articles     Next Articles

Effect of titanium surface treatment on improving the bonding strength of Ti/porcelain

DUAN Zhen-zhen1, LUO Meng2, ZHU Song2, QIU Xiao-ming1   

  1. 1. College of Materials Science and Engineering, Jilin University, Changchun 130022, China;
    2. College of Stomatology, Jilin University, Changchun 130041
  • Received:2012-04-01 Online:2012-09-01 Published:2012-09-01

PDF (PC)

313

Abstract: In order to improve the bonding strength of Ti/porcelain, the microstructure and bonding strength were studied after different methods of Ti surface treatment was applied. Experimental results show that sandblasting on Ti surface prior to sintering did not have a significant impact on improving the bonding strength, but it could restrain the propagation of cracks at Ti/porcelain interface. The pre-oxidation treatment of Ti could form a uniform film of oxide on surface, so the content of TiO2 which was participate in the interfacial reaction was increased, and resulted in the thickening of reaction layer. The temperature of pre-oxidation had a great effect on the bonding strength of Ti/porcelain. Magnetron sputtering Zr middle layer on Ti surface could decrease the thickness of oxide layer effectively, and the thickness of Zr middle layer had a great influence on bonding strength of Ti/porcelain.

Key words: surface and interface of materials, titanium, surface treatment, porcelain, bonding strength

CLC Number: 

  • TG425.2
[1] Guo L, Liu X, He Z, et al. Effect of fluoride corrosion on the bonding strength of Ti-porcelain[J]. Materials Letters, 2008, 62(14): 2200-2202.

[2] ⅰNan , Acar A, Halkaci S. Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium[J]. Journal of Biomedical Materials Research, 2006, 78B (2): 393-400.

[3] Taira Y, Matsumura H, Yoshida K, et al. Influence of surface oxidation of titanium on adhesion[J]. Journal of Dentistry, 1998, 26(1): 69-73.

[4] Chung K H, Duh J G, Shin D, et al. Characteristics and porcelain bond strength of (Ti, Al)N coating on dental alloys[J]. Journal of Biomedical Materials Research, 2002, 63(5): 516-521.

[5] ISO 9693. Metal-ceramic dental restorative systems[S]. Geneva: International Organization for Standardization, 1999: 10-14.
[1] ZHENG Xiao-yi, SUN Da-qian, LI Xin, DU Gui-gang, XIN Wei-da, REN Zhen-an. Microstructure and properties of cladded Al-Nb layers reinforced by NbAl3 [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1531-1536.
[2] CAO Min, CHEN Ting-kun, CONG Qian, JIN Jing-fu. Influence of PMMA surface morphology on ice adhesion strength [J]. 吉林大学学报(工学版), 2013, 43(05): 1314-1319.
[3] BAI Zhi-fan, LI Gui-zhong, WANG Chao. Microstructure and mechanical property of the welded joints of S355J2W+N steel [J]. 吉林大学学报(工学版), 2011, 41(增刊2): 202-204.
[4] WANG Hong-ying,CUI Cheng-yun,ZHOU Jie. Microstructure and properties of cobalt-based alloy coating on tool steel surface prepared by laser cladding [J]. 吉林大学学报(工学版), 2010, 40(04): 1000-1004.
[5] LI Xin,REN Zhen-an,SUN Da-qian,GU Zheng-wei. TiN layers prepared by nitrogen arc melting technique on Ti-6Al-4V substrate [J]. 吉林大学学报(工学版), 2010, 40(04): 995-0999.
[6] DUAN Zhen-zhen1，SUN Da-qian1，ZHU Song2，YIN Shi-qiang1，QIU Xiao-ming1 . Effects of technology parameters on microstructure and mechanical properties at the interface between porcelain and titanium [J]. 吉林大学学报(工学版), 2009, 39(01): 66-71.
[7] Zhang Guo-xiang，Zhang Kun, Luo Geng-xing, Chen Guang-nan，Li Huai-xue . Laser buckling method to measure interfacial toughness of chromium-plating coating [J]. 吉林大学学报(工学版), 2008, 38(01): 57-60.
[8] Li Yue-ying，Liu Yong-bing，Chen Hua . Surface hardening and tribological properties of a cam materials [J]. 吉林大学学报(工学版), 2007, 37(05): 1064-1068.
[9] Liu Jie, Qiu Xiao-ming, Sun Da-qian, Zhu Song, Yuan Shi-dong . Interface microstructure and mechanical properties
of Ni-Cr alloy porcelain materials [J]. 吉林大学学报(工学版), 2007, 37(05): 1083-1087.
[10] Cui Xue-jun，Cheng Ping，Zhang Hai-tao，Jin Wei-qun，Wang Hong-yan . Finite element simulation of a test model for interface bonding
strength between coating and substrate
 [J]. 吉林大学学报(工学版), 2007, 37(02): 357-0361.
[11] Zhang Hui-ping, Jiang Zhong-hao, Liu Xian-li, Lian Jian-she, Hou Xu-feng, Li Guang-yu . Electroless plating nanocrystalline Cu film on glass substrate [J]. 吉林大学学报(工学版), 2007, 37(01): 11-16.
[12] Dong Wen,Wang Hai-dong,Li Guang-yu,Tan Jian-jun . Surface microstructure of Cr film by Nd:YAG pulsed laser oxidation [J]. 吉林大学学报(工学版), 2007, 37(01): 17-21.
[13] Wang Shusen， Cheng Yongchun，Liu Hanbing ，Li Chunliang. Accurate method for measuring bonding strength of interface between carbon fiber and concrete [J]. 吉林大学学报(工学版), 2006, 36(增刊1): 53-0055.
[14] Li Guang-yu;Niu Li-yuan;Jiang Zhong-hao;Sun Li-ping;Lian Jian-she . Influence of current density on microstructure of nanocrystalline Zinc Nickel alloy deposition [J]. 吉林大学学报(工学版), 2006, 36(06): 835-0840.
[15] Tan Fu-xing;Li Ming-zhe;Qian Zhi-rui;Yuan Yuan.

Numerical simulation on process of multipoint forming for titanium alloy cranial prosthesis

[J]. 吉林大学学报(工学版), 2006, 36(06): 851-0855.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd