环境温度变化对机床基础热变形的影响规律

吉林大学学报(工学版) ›› 2002, Vol. ›› Issue (1): 33-36.

环境温度变化对机床基础热变形的影响规律

闫占辉¹, 于骏一¹, 曹毅²

1. 吉林大学机械科学与工.程学院, 吉林, 长春, 130025;
2. 吉林省机电研究设计院, 吉林, 长春, 130012

收稿日期:2001-05-24 出版日期:2002-01-25
基金资助:
国家科技部科技攻关资助项目(85240801)

Effects of Environmental Temperature Value on Deformation of Machine Tool Foundation

YAN Zhan-hui¹, YU Jun-yi¹, CAO Yi²

1. College of Mechanical Science & Engineering, Jilin University, Changchun 130025, China;
2. Jilin Academy of Machinery & Electricity Devices, Changchun 130012, China

Received:2001-05-24 Online:2002-01-25

摘要/Abstract

摘要： 在周期性热传导和弹性地基梁的基础上,分析了环境温度变化对机床基础热变形的影响规律。结果表明,随着基础深度的增加,基础温度分布为呈负指数规律递减的简谐波,且变形主要集中在距基础两端距离为π/(2β)以内。为此,本文提出双层基础这一新结构,使上层基础处于非主要变形区,且使其自重变形能够自动补偿环境温度变化引起的热变形,从而提高了机床的加工精度及其稳定性。

关键词: 环境温度, 机床基础, 热变形

Abstract: This article analyzes effects of environmental temperature on deformation of machine tool foundations on the basis of periodic heat conduction and elastic beam.It shows that foundation temperature decreases with the increase of depth in terms of negative exponent and cosine wave,and its deformation occurs when the distance is π/2β less than that foundation ends.Therefore,a new double self governed foundation is presented to make upper foundation locate on non-deformation region and its gravitational deformation compensate heat deformation automatically.As a result,machining precision of machine tools and stability can be improved greatly.

Key words: environmental temperature, machine foundation, deformation

中图分类号:

TG502.14

闫占辉, 于骏一, 曹毅. 环境温度变化对机床基础热变形的影响规律[J]. 吉林大学学报(工学版), 2002, (1): 33-36.

YAN Zhan-hui, YU Jun-yi, CAO Yi. Effects of Environmental Temperature Value on Deformation of Machine Tool Foundation[J]. 吉林大学学报(工学版), 2002, (1): 33-36.

参考文献

[1] Bryan J B. International status of thermal error research［J］. Annals of CIRP, 1990, 39(2) :645～656.
[2] [日]西川兼康,藤田恭申.传热学［M］北京:兵器工业出版社,1988.
[3] 龙驭球.弹性地基梁的计算［M］北京:高等教育出版社,1981.
[4] 盖脱伍德B.E.热应力［M］北京:科学出版社,1964.

相关文章 6

[1]	关庆丰,张福涛,彭韬,吕鹏,李姚君,许亮,丁佐军. 含硼、钴9%Cr耐热钢的热变形行为[J]. 吉林大学学报(工学版), 2018, 48(6): 1799-1805.
[2]	于晓东，付旭，刘丹，周启慧，李欢欢，王志强. 环形腔多油垫静压推力轴承热变形[J]. 吉林大学学报(工学版), 2015, 45(2): 460-465.
[3]	朱晓林^{1, 2}, 于鸣³, 高青^{1, 2}, 王有镗^{1, 2}. 地下换热管热变形引起的管-土间隙[J]. 吉林大学学报(工学版), 2014, 44(4): 998-1003.
[4]	宫长明,王舒,刘家郡，邓宝清，高青，刘巽俊 . 环境温度对点燃式甲醇发动机冷起动性能的影响[J]. 吉林大学学报(工学版), 2009, 39(01): 27-33.
[5]	关磊, 汪家道, 陈大融. 微小型发动机柱塞温度场和热变形的三维有限元数值模拟[J]. 吉林大学学报(工学版), 2003, (4): 34-38.
[6]	闫占辉, 于骏一. 机床热变形的研究现状[J]. 吉林大学学报(工学版), 2001, (3): 95-97.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed