吉林大学学报(工学版)

• • 上一篇    下一篇

开式二相热虹吸管的传热特性

苏俊林1, 卢军2, 王震坤1   

  1. 1.吉林大学 汽车工程学院, 长春 130022; 2.大连冰山空调设备有限公司, 辽宁 大连 116033
  • 收稿日期:2005-01-15 修回日期:2005-03-01 出版日期:2005-07-01 发布日期:2005-07-01
  • 通讯作者: 苏俊林

Heat Transfer Characteristics of Open Twophase Thermosyphon

SU Junlin1, LU Jun2, WANG Zhenkun1   

  1. 1.College of Automotive Engineering, Jilin University, Changchun 130022,China; 2.Dalian Ice Mountain Air Conditioning Equipment Co. Ltd., Dalian 116033, China
  • Received:2005-01-15 Revised:2005-03-01 Online:2005-07-01 Published:2005-07-01
  • Contact: SU Junlin

摘要: 为了研究开式二相热虹吸管的传热特性,对其内部流动进行了理论分析,推导出了影响其工作极限——阻流现象的判据。在实验基础上建立了考虑开式二相热虹吸管倾角、开孔数、孔径及热流密度等影响的当量传热系数的经验公式。对比实验表明:开式热管的当量传热系数为闭式热管的85%以上,总传热量为相同工况下闭式二相热虹吸管的90%以上,而成本只有其50%左右。

关键词: 热工学, 开式二相热虹吸管, 传热特性, 余热回收

Abstract: In order to study the heat transfer characteristics of the twophase thermosyphon,its internal flow was analysed theoretically, a criterion affecting its working limit was deduced. By studying the heat transfer characteristics through experiments, an experiential formula of the equivalent heat transfer coefficient was established including the influences of the inclination, the hole number, the hole diameter and the heat flux density. Contrast experiments showed that the equivalent heat transfer coefficient of the open thermosyphon is above 85% of that of the closed one, and its total heat transfer quantity is above 90% of that of the closed one under the same working condition, but its cost is only about 50% of that of the closed thermosyphon.

Key words: thermal engineering, open twophase thermosyphon, heat transfer characteristics, waste heat recovery

中图分类号: 

  • TK126
[1] 白鹏飞,汤勇,陆龙生,唐彪. 以水为工质的铜基微通道热沉的流态可视化与传热特性[J]. 吉林大学学报(工学版), 2010, 40(04): 959-0964.
[2] 陈立军,杨善让,王升龙,米利俊. 复合制冷循环电站空冷系统的热力学分析[J]. 吉林大学学报(工学版), 2009, 39(增刊2): 283-0286.
[3] 苏俊林,徐晓英,潘亮,朱长明 . 液化气锅炉富氧燃烧的数值模拟及实验研究[J]. 吉林大学学报(工学版), 2009, 39(03): 598-0603.
[4] 高青,李明,马纯强,江彦,于鸣 . 地下岩土蓄能过程控制模式[J]. 吉林大学学报(工学版), 2009, 39(03): 593-0597.
[5] 邵宝东;孙兆伟;王丽凤 . 热阻网络模型在微槽冷却热沉优化设计中的应用[J]. 吉林大学学报(工学版), 2007, 37(06): 1263-1267.
[6] 岂兴明,苏俊林,矫津毅3 . 小型平板热管的传热特性
[J]. 吉林大学学报(工学版), 2006, 36(05): 669-0672.
[7] 文键,厉彦忠,周爱民,张科. 板翅式换热器入口结构的改进[J]. 吉林大学学报(工学版), 2006, 36(02): 177-0182.
[8] 苏俊林 , 李博 , 矫振伟. 微小矩形多槽道平板热管的传热性能[J]. 吉林大学学报(工学版), 2005, 35(06): 592-0595.
[9] 黄海珍, 王震坤, 苏俊林, 刘效洲. 复合工质真空相变元件的传热特性[J]. 吉林大学学报(工学版), 2003, (3): 42-45.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!