吉林大学学报(工学版)

• • 上一篇    下一篇

载流矩形薄板在电磁场中的屈曲分析

王知人1,2,王平2,3,白象忠2,3   

  1. 1.燕山大学 理学院,河北 秦皇岛 066004; 2.中国科学院 非线性连续介质力学国家重点实验室(LNM),北京 100080; 3.燕山大学 建筑工程与力学学院,河北 秦皇岛 066004
  • 收稿日期:2006-05-23 修回日期:2006-08-12 出版日期:2007-05-01 发布日期:2007-05-01
  • 通讯作者: 王知人

Magneticelastisity bucklig analysis of thin currentcarrying plate

Wang Zhi-ren1,2,Wang Ping2,3,Bai Xiang-zhong2,3   

  1. 1.College of Sciences, Yanshan University, Qinhuangdao 066004, China; 2.The State Key Laboratory of Nonlinear Continuum Mechanical(LNM),Beijing 100080,China; 3.College of Civil Engineering and Mechanics,Yanshan University, Qinhuangdao 066004,China
  • Received:2006-05-23 Revised:2006-08-12 Online:2007-05-01 Published:2007-05-01
  • Contact: Wang Zhi-ren

摘要: 在载流薄板的磁弹性非线性运动方程、物理方程、洛仑兹力表达式及电动力学方程的基础上,导出了载流薄板磁弹性动力屈曲方程,并应用Galerkin原理把屈曲方程整理为Mathieu方程的标准形式,将载流矩形薄板在电磁场与机械荷载共同作用下的磁弹性屈曲问题归结为对Mathieu方程的求解问题。利用Mathieu方程系数λ和 η的本征值关系,得出了载流薄板磁弹性动力屈曲临界状态的判别方程。并对不同边界条件、不同材料的矩形薄板进行了具体计算,给出了薄板的磁弹性动力失稳临界状态与相关参量之间的关系曲线,并对计算结果及其变化规律进行了分析讨论。

关键词: 物理力学, 磁弹性, 屈曲, Mathieu方程, Galerkin原理, 薄板

Abstract: Based on the magneticelasticity nonlinear kinetic equations, physical equations, electrical kinetic equations and the expression of Lorentz forces, the magneticelasticity kinetic buckling equation of a currentcarrying plate applied mechanical load in a magnet field were derived. The equation was transformed into the standard Mathieu equation by using Galerkin method. Thus, the magneticelasticity kinetic problem was changed into a problem of solving the Mathieu equation. The criterion equation of the magneticelasticity kinetic problem was gotten by the eigenvalue relation of Mathieu equation's coefficient λ and η. The rectangular plates made of different materials were taken as calculating examples. The curves of the relations among the relative parameters are obtained when the plates are in the situation of critical buckling. The analysis and discussion of the calculating conclusion are given out.

Key words: physical mechanics, magneticelasticity, buckling, Mathieu equation, Galerkin method, thin plate

中图分类号: 

  • O441
[1] 孙秀荣, 董世民, 王宏博, 李伟成, 孙亮. 整体抽油杆柱在油管内空间屈曲的多段式仿真模型对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1124-1132.
[2] 李明阳, 马彪, 李和言, 杜秋, 于亮, 陈飞. 径向热应力对离合器摩擦对偶钢片变形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 83-88.
[3] 钱志辉, 苗怀彬, 任雷, 任露泉. 基于多种步态的德国牧羊犬下肢关节角[J]. 吉林大学学报(工学版), 2015, 45(6): 1857-1862.
[4] 闫光,韩小进,闫楚良,祝连庆. 含口盖复合材料圆柱壳轴压屈曲性能分析[J]. 吉林大学学报(工学版), 2015, 45(1): 187-192.
[5] 王素芬, 彭艳, 李志杰, 肖力子. 薄板坯连铸连轧工艺生产的低碳钢冷轧基板力学特性[J]. 吉林大学学报(工学版), 2012, 42(增刊1): 221-224.
[6] 闫光, 范舟, 李钟海, 程小全, 刘克格, 左春柽. 复合材料加口盖柱壳的设计与分析[J]. , 2012, (06): 1437-1441.
[7] 张建平, 戴咏夏, 颜志江, 纪冬梅, 王昊. 悬臂导电薄板磁弹性耦合作用下的磁阻尼分析[J]. 吉林大学学报(工学版), 2011, 41(02): 413-0418.
[8] 周平,郭威,申国哲,胡平. 薄板成形模拟中切边回弹算法[J]. 吉林大学学报(工学版), 2010, 40(04): 931-0936.
[9] 艾永明,杨炳成,黄平明. 索-拱体系横向屈曲临界荷载的实用计算[J]. 吉林大学学报(工学版), 2010, 40(01): 63-0066.
[10] 刘峰,王鑫伟 . 直井中钻柱非线性屈曲的DQ法分析[J]. 吉林大学学报(工学版), 2007, 37(01): 234-238.
[11] 王蔓,李泽成,白瑞祥 . 复合材料格栅加筋板的分层扩展特性[J]. 吉林大学学报(工学版), 2007, 37(01): 229-233.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!