吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 202-206.

• 论文 • 上一篇    下一篇

钛表面处理对增强钛/瓷结合强度的影响

段珍珍1, 罗梦2, 朱松2, 邱小明1   

  1. 1. 吉林大学 材料科学与工程学院, 长春130022;
    2. 吉林大学 口腔医学院, 长春130041
  • 收稿日期:2012-04-01 出版日期:2012-09-01 发布日期:2012-09-01
  • 通讯作者: 朱松(1965-),男,教授,博士.研究方向:生物医用与仿生材料.E-mail:zhusong1965@163.com E-mail:zhusong1965@163.com
  • 作者简介:段珍珍(1982-),女,博士研究生.研究方向:先进材料的连接.E-mail:duanzhen20062009@163.com
  • 基金资助:

    吉林省科技发展计划项目(20050511).

Effect of titanium surface treatment on improving the bonding strength of Ti/porcelain

DUAN Zhen-zhen1, LUO Meng2, ZHU Song2, QIU Xiao-ming1   

  1. 1. College of Materials Science and Engineering, Jilin University, Changchun 130022, China;
    2. College of Stomatology, Jilin University, Changchun 130041
  • Received:2012-04-01 Online:2012-09-01 Published:2012-09-01

摘要: 为了提高钛/瓷结合强度,通过不同方法对钛表面进行处理,研究了钛表面处理后钛/瓷界面组织及结合强度。试验结果表明,烤瓷前进行钛表面喷砂处理,对增强钛/瓷结合强度的影响并不显著,但对抑制钛/瓷界面裂纹的扩展起到积极作用;钛表面预氧化处理能够在钛表面形成一层均匀的氧化膜,使参与界面反应的TiO2增多,反应层增厚,但预氧化温度对钛/瓷结合强度有重要影响;钛表面磁控溅射Zr中间层能够抑制钛表面生成过厚氧化层,而中间层厚度对钛/瓷结合强度也有较大影响。

关键词: 材料表面与界面, 钛, 表面处理, 陶瓷, 结合强度

Abstract: In order to improve the bonding strength of Ti/porcelain, the microstructure and bonding strength were studied after different methods of Ti surface treatment was applied. Experimental results show that sandblasting on Ti surface prior to sintering did not have a significant impact on improving the bonding strength, but it could restrain the propagation of cracks at Ti/porcelain interface. The pre-oxidation treatment of Ti could form a uniform film of oxide on surface, so the content of TiO2 which was participate in the interfacial reaction was increased, and resulted in the thickening of reaction layer. The temperature of pre-oxidation had a great effect on the bonding strength of Ti/porcelain. Magnetron sputtering Zr middle layer on Ti surface could decrease the thickness of oxide layer effectively, and the thickness of Zr middle layer had a great influence on bonding strength of Ti/porcelain.

Key words: surface and interface of materials, titanium, surface treatment, porcelain, bonding strength

中图分类号: 

  • TG425.2
[1] Guo L, Liu X, He Z, et al. Effect of fluoride corrosion on the bonding strength of Ti-porcelain[J]. Materials Letters, 2008, 62(14): 2200-2202.

[2] ⅰNan , Acar A, Halkaci S. Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium[J]. Journal of Biomedical Materials Research, 2006, 78B (2): 393-400.

[3] Taira Y, Matsumura H, Yoshida K, et al. Influence of surface oxidation of titanium on adhesion[J]. Journal of Dentistry, 1998, 26(1): 69-73.

[4] Chung K H, Duh J G, Shin D, et al. Characteristics and porcelain bond strength of (Ti, Al)N coating on dental alloys[J]. Journal of Biomedical Materials Research, 2002, 63(5): 516-521.

[5] ISO 9693. Metal-ceramic dental restorative systems[S]. Geneva: International Organization for Standardization, 1999: 10-14.
[1] 郑孝义, 孙大千, 李欣, 都桂刚, 辛伟达, 任振安. NbAl3强化Al-Nb熔覆层的组织与性能[J]. 吉林大学学报(工学版), 2018, 48(5): 1531-1536.
[2] 金敬福, 李杨, 陈廷坤, 丛茜, 齐迎春. 涂层弹性模量对结冰附着强度的影响[J]. 吉林大学学报(工学版), 2017, 47(5): 1548-1553.
[3] 杨悦, 周磊磊. 微弧氧化对铝合金搅拌摩擦焊缝耐蚀性能的影响[J]. 吉林大学学报(工学版), 2016, 46(2): 511-515.
[4] 周志国, 卢江跃. 弯曲振动下压电陶瓷复合圆盘的可靠性分析[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 138-142.
[5] 曹敏, 陈廷坤, 丛茜, 金敬福. 表面形态对结冰附着强度的影响[J]. 吉林大学学报(工学版), 2013, 43(05): 1314-1319.
[6] 李国发, 张栋林, 龚金龙, 王利斌. ZrO2陶瓷激光加热辅助切削加工技术[J]. , 2012, (06): 1409-1414.
[7] 戴晟, 左敦稳, 黎向锋, 程虎, 方志刚, 王珉, 缪宏. 2738模具钢表面激光熔覆Ni基WC复合涂层的摩擦磨损性能[J]. , 2012, 42(04): 924-929.
[8] 白志范, 李桂中, 王超. S355J2W+N钢焊接接头显微组织与力学性能[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 202-204.
[9] 杨悦, 庄宇, 由晓军. AZ91D镁合金表面激光熔覆Al-Ti-C涂层的显微组织和性能[J]. 吉林大学学报(工学版), 2010, 40(06): 1567-1571.
[10] 王红颖,崔承云,周杰. 工具钢表面激光熔覆Co基合金涂层的组织及性能[J]. 吉林大学学报(工学版), 2010, 40(04): 1000-1004.
[11] 段珍珍,孙大千,朱松,殷世强,邱小明 . 工艺参数对钛/瓷界面组织及性能的影响[J]. 吉林大学学报(工学版), 2009, 39(01): 66-71.
[12] 闫世伟,杨志刚,阚君武,程光明,曾平 . 压电陶瓷能量转换系统[J]. 吉林大学学报(工学版), 2008, 38(02): 344-0348.
[13] 李雪松,江中浩,连建设,李光玉 . 分散方式对Ni-Si3N4纳米复合电镀层显微组织和性能的影响[J]. 吉林大学学报(工学版), 2007, 37(06): 1317-1322.
[14] 刘杰,邱小明,孙大谦,朱松,袁世东 . Ni-Cr合金烤瓷材料界面组织结构和力学性能[J]. 吉林大学学报(工学版), 2007, 37(05): 1083-1087.
[15] 李月英,刘勇兵,陈华 . 凸轮材料的表面强化及其摩擦学特性
[J]. 吉林大学学报(工学版), 2007, 37(05): 1064-1068.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!