吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 207-211.
白志范1, 李桂中1, 王超1, 王良2, 张志敏2
BAI Zhi-fan1, LI Gui-zhong1, WANG Chao1, WANG Liang2, ZHANG Zhi-min2
摘要: 采用混合气体保护焊焊接方法对进口S355J2W钢和国产09CuPCrNi-A钢两种耐候钢通过焊接机器人单面焊双面成型的方式进行自动焊接实验,通过拉伸、硬度和金相检验试验方法对得到的焊接接头显微组织和力学性能进行了分析研究。结果表明,两种钢材焊接接头抗拉强度均优于母材,具有良好的力学强度,能够满足国产化技术要求。两种钢的焊接接头焊缝组织类似,S355J2W钢焊缝主要为粗大板条状和块状铁素体加先共析铁素体,含少量珠光体和粒状贝氏体;09CuPCrNi-A钢焊缝主要为条状和针状铁素体加先共析铁素体,含少量珠光体和粒状贝氏体。
中图分类号:
[1] 刘丽宏,齐慧滨,卢燕平,等. 耐大气腐蚀钢的研究概况[J].腐蚀科学与防护技术,2003,15(2):86-89. LIU Li-hong,QI Hui-bin,LU Yan-ping, et al. A review on weathering steel research[J]. Corrosion Science and Technology Protection,2003,15(2):86-89.[2] 臧传宝.热变形工艺对S355钢板相变行为的影响[J].物理测试,2005,23(3):38-40. Zang Chuan-bao. Effects of hot rolling technology on phase transformation points of steel plate s355[J]. Physics Examination and Testing, 2005, 23(3):38-40.[3] 董天真,孔德强,信海喜.欧标S355系列高强结构钢板的研制与开发[J].天津冶金,2009(4):8-12. Dong Tian-zhen, Kong De-qiang, Xin Hai-xi. Research and development of european standard s355 series high strength structure plate[J]. Tianjin Metallurgy,2009(4):8-12.[4] 许鸿吉,金光,宋冰,等.S355钢焊接接头的组织与力学性能[J].理化检验-物理分册,2008,44(11):600-603. Xu Hong-ji,Jin Guang,Song Bing, et al. Microstructures and mechanical properties of the welded joints of s355 steel[J]. Ptca(Part: A Phys.T Est.),2008,44(11):600-603. |
[1] | 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810. |
[2] | 庄蔚敏, 赵文增, 解东旋, 李兵. 超高强钢/铝合金热铆连接接头性能[J]. 吉林大学学报(工学版), 2018, 48(4): 1016-1022. |
[3] | 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
[4] | 赵宇光, 杨雪慧, 徐晓峰, 张阳阳, 宁玉恒. Al-10Sr变质剂状态、变质温度及变质时间对ZL114A合金组织的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 212-220. |
[5] | 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833. |
[6] | 刘晓波, 周德坤, 赵宇光. 不同等温热处理条件下半固态挤压Mg2Si/Al复合材料的组织和性能[J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582. |
[7] | 李春玲, 樊丁, 王斌, 余淑荣. 5A06铝合金/镀锌钢预置涂粉对接激光熔钎焊组织与性能[J]. 吉林大学学报(工学版), 2016, 46(2): 516-521. |
[8] | 邓成江,何晓聪,邢保英,王玉奇,曾凯,丁燕芳. 铝与铜异质板材自冲铆搭接接头的力学性能[J]. 吉林大学学报(工学版), 2015, 45(2): 473-480. |
[9] | 李欣,王刚,陆冠含,谷诤巍,徐虹. 22MnB5热成形钢板钨极氩弧焊接性能[J]. 吉林大学学报(工学版), 2014, 44(3): 708-711. |
[10] | 刘玉艳, 储顺礼, 李男男, 包幸福, 高尚, 沙莉, 胡敏, 蒋引珊. 不同质量比N,O-CMC/n-β-TCP复合材料在模拟体液中的降解性能[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 552-556. |
[11] | 张霖, 赵宏伟, 杨倚寒, 马智超, 黄虎, 马志超. 单层石墨烯薄膜材料纳米压痕过程的分子动力学解析[J]. 吉林大学学报(工学版), 2013, 43(06): 1558-1565. |
[12] | 王素芬, 彭艳, 李志杰, 肖力子. 薄板坯连铸连轧工艺生产的低碳钢冷轧基板力学特性[J]. 吉林大学学报(工学版), 2012, 42(增刊1): 221-224. |
[13] | 谷诤巍, 于思彬, 韩立军, 孟佳, 徐虹. 超高强度钢与低合金钢的激光搭接焊性能[J]. 吉林大学学报(工学版), 2012, 42(02): 349-353. |
[14] | 白志范, 李桂中, 王超. S355J2W+N钢焊接接头显微组织与力学性能[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 202-204. |
[15] | 姜日花1,白爽1,戴跃2 ,赵梅生3. 瘢痕疙瘩的生物力学特性[J]. 吉林大学学报(工学版), 2011, 41(6): 1675-1677. |
|