高速紫外光子探测器位置读出电路的实现

doi:10.13229/j.cnki.jdxbgxb201706042

吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (6): 1986-1990.doi: 10.13229/j.cnki.jdxbgxb201706042

高速紫外光子探测器位置读出电路的实现

尼启良¹, 向秋东^{1, 2}, 刘修富^{1, 2}, 梁景广^{1, 2}, 姜忠志^{1, 2}

1.中国科学院长春光学精密机械与物理研究所,长春 130033;
2.中国科学院大学,北京 100049

收稿日期:2016-08-19 出版日期:2017-11-20 发布日期:2017-11-20
作者简介:尼启良(1966-),男,研究员,博士.研究方向:软X射线-紫外波段空间应用光子计数成像探测器.E-mail:qiliangni@qq.com
基金资助:
国家自然科学基金项目(61675201,61475154); 吉林省科技发展计划重点科技攻关项目(20160204064GX)

High speed position readout circuit design for extreme ultraviolet photon-counting imaging detector

NI Qi-liang¹, XIANG Qiu-dong^{1, 2}, LIU Xiu-fu^{1, 2}, LIANG Jing-guang^{1, 2}, JIANG Zhong-zhi^{1, 2}

1.Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2. University of Chinese Academy of Sciences, Beijing 100049, China

Received:2016-08-19 Online:2017-11-20 Published:2017-11-20

摘要/Abstract

摘要： 为了提高现有楔条形阳极的光子计数成像探测器的整体计数率,根据探测器输出信号的特点,研制了一个基于高速模数转换(A/D)芯片和现场可编程门阵列(FPGA)的位置读出电路。该电路采用高速A/D芯片(65 MHz采样频率)对整型放大器输出的高斯型脉冲信号逐点数据采样后获取其峰值的方法来代替原有的前端模拟电路中昂贵的峰值保持模块及NI公司的多道数据采集卡,采集的数据通过FPGA进行处理并且通过USB传输到计算机中进行解码,最终还原出图像。试验结果表明:由该电路获得的探测器图像在分辨率基本保持不变的条件下,整体计数率可以提高近一倍。

关键词: 电子技术, 光子计数, 位置读出电路, 模数转换

Abstract: In order to raise the whole count rate of a wedge-strip anode's photon-counting imaging detector, according to the feature of the signal output from the detector, a position readout circuit was designed and developed. This circuit is based on high speed Analog-Digital (A/D) converters and a Field Programmable Gate Array (FPGA) chip. The circuit employs high speed A/D converters with 65 MHz sapling rate to transform the Gaussian pulse analog signal into digital series at every clock period and obtain the peak value of the pulse signal by a FPGA. It has the functions of peak hold module of voltage pulse and NI data collection card in the original circuit. The FPGS processes the received digital series according to certain rules and sends them to the computer by UBS data interface. The developed software can compute the coordinate position of every photon and display them on PC screen according to obtained 3-way data. The design of the circuit hardware and logic control is described in detail in this paper. Experiment results show that the designed circuit can get a 2D image with same position resolution and double count rate compared with the original circuit with peak hold and NI card.

Key words: electronic technique, photon-counting, position readout circuit, analog to digital conversion

中图分类号:

O436

尼启良, 向秋东, 刘修富, 梁景广, 姜忠志. 高速紫外光子探测器位置读出电路的实现[J]. 吉林大学学报(工学版), 2017, 47(6): 1986-1990.

NI Qi-liang, XIANG Qiu-dong, LIU Xiu-fu, LIANG Jing-guang, JIANG Zhong-zhi. High speed position readout circuit design for extreme ultraviolet photon-counting imaging detector[J]. 吉林大学学报(工学版), 2017, 47(6): 1986-1990.

参考文献

[1] 黄良. 基于FPGA的极紫外相机主控系统设计[D].北京:中国科学院大学研究生院,2010.
Huang Liang. Design of the main control system of EUV camera based on FPGA[D]. Beijing: Graduate School, University of Chinese Academy of Sciences,2010.
[2] 尼启良,何玲平,刘世界,等. 使用感应电荷位敏阳极的极紫外单光子计数成像系统[J]. 光学精密工程,2010,18(12):2543-2548.
Ni Qi-liang, He Ling-ping, Liu Shi-jie, et al.Extreme ultraviolet single photon-counting imaging system based on induced charge position-sensitive anode[J]. Optics and Precision Engineering,2010,18(12):2543-2548.
[3] 潘京生. 微通道板及其成像探测应用的研究[D].长春:长春理工大学材料科学与工程学院,2013.
Pan Jing-sheng. Study on microchannel plate and microchannel plate based imaging detection applications[D]. Changchun: School of Materials Science and Engineering,Changchun University of Science and Technology,2013.
[4] 张凯. 远紫外电荷分割阳极光子计数成像探测器位置读出电路研究[D]. 北京:中国科学院大学长春光学精密机械与物理研究所,2014.
Zhang Kai. Position readout circuit study of far ultraviolet photon counting imaging detector based on charge division anode[D]. Beijing: Changchun Institute of Optics, Fine Mechanics and Physics, University of Chinese Academy of Sciences,2014.
[5] 尼启良. 极紫外微通道板光子计数成像探测器性能研究[J]. 光学学报,2013,33(11):1104001.
Ni Qi-liang. Study on characteristic performance of an MCP-based photon-counting imaging detector[J]. Acta Optica Sinica,2013,33(11):1104001.
[6] 何玲平,尼启良,李敏,等. 楔条形阳极光子计数探测器成像性能检测[J]. 光学精密工程,2009,17(11):2699-2704.
He Ling-ping,Ni Qi-liang,Li Min,et al. Image performance of photon-counting imaging detector with wedge-and-strip a node[J]. Optics and Precision Engineering,2009,17(11):2699-2704.
[7] 尼启良,刘世界,陈波. 极紫外位置灵敏阳极光子计数成像探测器研究[J]. 中国光学与应用光学,2009,2(1):36-40.
Ni Qi-liang, Liu Shi-jie, Chen Bo. Investigation on extreme ultraviolet photon-counting imaging detector with position-sensitive anode[J]. Chinese Optics and Applied Optics Abstracts,2009,2(1):36-40.
[8] 张兴华,赵宝升,缪震华,等. 紫外单光子成像系统的研究[J].物理学报,2008,57(7):4238-4243.
Zhang Xing-hua, Zhao Bao-sheng, Miao Zhen-hua,et al.Study of ultraviolet single photon imaging system[J]. Acta Physica Sinica,2008,57(7):4238-4243.
[9] XILINX Spartan-3E FPGA family: complete data sheet[2016-04-10].[EB/OL]. http://www.xilinx.com.
[10] Complete 12-Bit, 65 MSPS ADC converter AD9226[EB/OL]. [2016-04-10]. http://www.analog.com.
[11] CY7C68013 EZ-USB FX2 TM usb microcontroller high-speed usb peripheral controller[EB/OL]. [2016-04-10]. http://www.cypress.com.

相关文章 15

[1]	陈鸣, 陈杰, 肖璟博. 一种应用于CMOS图像传感器的流水线模数转换器设计[J]. 吉林大学学报(工学版), 2018, 48(3): 968-976.
[2]	王言章, 秦佳男, 张雪, 陈晨. 用于SERF原子磁力仪的原子气室无磁加热系统[J]. 吉林大学学报(工学版), 2017, 47(2): 686-692.
[3]	蒲鑫, 田小建, 王春民, 张晶, 董磊, 尹晶. 基于光纤混沌替代电路的图像加密方案[J]. 吉林大学学报(工学版), 2014, 44(01): 270-275.
[4]	常玉春, 余昭杰, 李靖, 曹令今, 李强, 杜国同. 基于建立-向下偏转过程11-bit 1-MS/s逐次逼近型模数转换器的设计[J]. 吉林大学学报(工学版), 2013, 43(02): 480-484.
[5]	张文秀, 林君, 刘立超, 胡瑞华. 分布式电磁探测宽频数据采集系统设计与实现[J]. , 2012, (06): 1426-1431.
[6]	吴海超, 林君, 李哲, 张怀柱, 杨泓渊, 陈祖斌, 郑凡. 无缆存储式地震仪无线网络监控技术[J]. , 2012, 42(05): 1296-1301.
[7]	庞丽莉, 吕奇辰, 王世隆, 随阳轶, 林君. 基于平方根-卡尔曼滤波的无线网络仪器时钟同步算法[J]. , 2012, 42(05): 1291-1295.
[8]	殷崇勇, 尹首一, 魏少军. 可重构媒体处理器配置信息优化生成技术[J]. , 2012, 42(04): 1059-1065.
[9]	钟玉林, 温旭辉, 刘钧, 刘志宏. 国产450A-600V车用智能功率模块的研发[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 316-320.
[10]	王芳荣, 林晓珑, 王晓鹏, 张佳全, 张铁强, 冯毅. 粘胶长丝在线实时监测系统设计与处理算法[J]. 吉林大学学报(工学版), 2011, 41(增刊2): 288-291.
[11]	潘伟涛¹,谢元斌²,郝跃²,史江义². 基于启发式链搜索的频繁子电路提取算法[J]. 吉林大学学报(工学版), 2011, 41(6): 1748-1753.
[12]	秦政坤,贺飞,刘春玲,马春生. 离子刻蚀工艺对聚合物阵列波导光栅理论模拟的影响[J]. 吉林大学学报(工学版), 2011, 41(03): 791-794.
[13]	宋建辉, 袁峰, 丁振良, 廖百健. 基于非条件稳定时域有限差分法的传输线瞬态分析[J]. 吉林大学学报(工学版), 2010, 40(05): 1438-1441.
[14]	罗韬，姚素英，史再峰，陆尧 . 视频芯片中的OSD核的设计及FPGA的实现[J]. 吉林大学学报(工学版), 2008, 38(06): 1452-1457.
[15]	郁发新,，孙琳琳 . 基于太阳矢量的皮卫星姿态角测量误差分析[J]. 吉林大学学报(工学版), 2008, 38(04): 976-980.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

高速紫外光子探测器位置读出电路的实现

High speed position readout circuit design for extreme ultraviolet photon-counting imaging detector

RICH HTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0