吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (01): 84-0088.

• 论文 • 上一篇    下一篇

CoAlW合金时效过程中γ′相析出的相场模拟

高一鹏,丁洪,金学军   

  1. 上海交通大学 材料科学与工程学院|上海 200240
  • 收稿日期:2009-09-28 出版日期:2011-01-01 发布日期:2011-01-01
  • 通讯作者: 金学军(1969-),男,教授,博士生导师.研究方向:材料固态相变理论与组织性能调控,新型形状记忆材料的设计与开发.E-mail:jin@sjtu.edu.cn E-mail:jin@sjtu.edu.cn
  • 作者简介:高一鹏(1984-),男,硕士研究生.研究方向:固态相变的相场模拟.E-mail:yipenggao@gmail.com
  • 基金资助:

    国家自然科学基金项目(50571064)

γ′ |precipitation during ageing of a CoAlW alloy by phase field simulation

GAO Yi-peng, DING Hong,JIN Xue-jun   

  1. School of Material Science and Engineering, Shanghai Jiaotong University, Shanghai 200240,China
  • Received:2009-09-28 Online:2011-01-01 Published:2011-01-01

摘要:

运用相场方法模拟了CoAlW合金时效过程中,L12有序结构的γ′相从共格无序面心立方母相γ中析出的过程。基于静态浓度波的形式描述结构的有序度,构造了关于浓度和有序度的自由能曲面。将晶格的错配应变和L12结构的4种反相纳入模型中,并考虑两相弹性模量差别对组织演化的影响。通过二维计算机模拟,得到与实验相符的组织形态,证实了CoAlW合金中γ/γ′沉淀强化机制。

关键词: 金属材料, CoAlW合金, 相场模拟, γ/γ′析出强化, 显微组织演化

Abstract:

The precipitation of the L12 ordered intermetallic phase γ′ from the co-lattice non-ordered face-center cubic parent phase γ during the ageing process of the CoAlW alloys was simulated using the phase field simulation technique. The chemical free energy surfaces of the concentration and the ordered degree were constructed based on the description of the structure ordered degree by the form of static concentration wave. The strain of crystal lattice caused by mispairing and 4 antiphases of the L12 structure were introduced into the model, and the effect of the difference of the modules of elasticity of 2 phases on the microstructure evolution was taken into account. The microstructure in accordance with the experiment was obtained by a 2-dimensional computer simulation, proving the γ/γ′-type precipitation hardening mechanism in the CoAlW alloys.

Key words: metallic materials, CoAlW alloy, phase field simulation,  , γ/γ′-type precipitation hardening, microstructure evolution

中图分类号: 

  • TG111.5
[1] 关庆丰,张福涛,彭韬,吕鹏,李姚君,许亮,丁佐军. 含硼、钴9%Cr耐热钢的热变形行为[J]. 吉林大学学报(工学版), 2018, 48(6): 1799-1805.
[2] 关庆丰, 董书恒, 郑欢欢, 李晨, 张从林, 吕鹏. 强流脉冲电子束作用下45#钢表面Cr合金化[J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168.
[3] 赵宇光, 杨雪慧, 徐晓峰, 张阳阳, 宁玉恒. Al-10Sr变质剂状态、变质温度及变质时间对ZL114A合金组织的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[4] 汤华国, 马贤锋, 赵伟, 刘建伟, 赵振业. 高性能金属铝的制备、微观结构及其热稳定性[J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547.
[5] 关庆丰, 张远望, 孙潇, 张超仁, 吕鹏, 张从林. 强流脉冲电子束作用下铝钨合金的表面合金化[J]. 吉林大学学报(工学版), 2017, 47(4): 1171-1178.
[6] 杨晓红, 杭文先, 秦绍刚, 刘勇兵, 刘利萍. H13钢激光熔覆钴基复合涂层的组织及耐磨性[J]. 吉林大学学报(工学版), 2017, 47(3): 891-899.
[7] 关庆丰, 黄尉, 李怀福, 龚晓花, 张从林, 吕鹏. 强流脉冲电子束诱发的Cu-C扩散合金化[J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973.
[8] 张学广, 刘纯国, 郑愿, 江仲海, 李湘吉. 基于延性损伤和剪切损伤的铝合金成形极限预测[J]. 吉林大学学报(工学版), 2016, 46(5): 1558-1566.
[9] 刘晓波, 周德坤, 赵宇光. 不同等温热处理条件下半固态挤压Mg2Si/Al复合材料的组织和性能[J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[10] 李春玲, 樊丁, 王斌, 余淑荣. 5A06铝合金/镀锌钢预置涂粉对接激光熔钎焊组织与性能[J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[11] 张家陶, 赵宇光, 谭娟. 初始组织对电脉冲处理逆变奥氏体晶粒细化效果的影响[J]. 吉林大学学报(工学版), 2016, 46(1): 193-198.
[12] 张志强, 贾晓飞, 袁秋菊. 基于Yoshida-Uemori模型的TRIP800高强钢回弹分析[J]. 吉林大学学报(工学版), 2015, 45(6): 1852-1856.
[13] 张志强, 贾晓飞, 赵勇, 李湘吉. 高强度硼钢淬火界面热交换系数的实验与模拟[J]. 吉林大学学报(工学版), 2015, 45(4): 1195-1199.
[14] 关庆丰, 李艳, 侯秀丽, 杨盛志, 王晓彤. 固溶态Mg-Gd-Y-Nd合金强流脉冲电子束表面改性[J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205.
[15] 马云海, 尚文博, 范雪莹, 高知辉, 佟金, 闫志峰, 常志勇. 仿骨β相磷酸三钙多孔生物陶瓷制备及降解[J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!