吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (5): 1388-1394.doi: 10.13229/j.cnki.jdxbgxb201505002

Previous Articles     Next Articles

Master cylinder dynamic model for brake pedal feeling and its key factors

MENG De-jian1, 2, 3, ZHANG Li-jun1, 2, FANG Ming-xia4, YU Zhuo-ping1, 2   

  1. 1.School of Automotive Engineering,Tongji University,Shanghai 201804,China;
    2.Collaborative Innovation Center for Intelligent New Energy Vehicle,Tongji University,Shanghai 201804,China;
    3.Mechanics Post-doctoral Research Station,Tongji University,Shanghai 200092,China;
    4.School of Aerospace Engineering and Applied Mechanics,Tongji University,Shanghai 200092,China
  • Received:2013-12-15 Online:2015-09-01 Published:2015-09-01

RICH HTML

0   

PDF (PC)

568

Abstract: A brake master cylinder dynamic model for brake pedal feeling is proposed, in which the return spring preload, system friction forces, valve port clearance and changes in the brake fluid bulk modulus are considered. Experiments on the characteristics of the brake master cylinder are carried out under the condition of different pushrod speed, and then the key parameters of model are identified. By analysis and comparison, it is found that the test results and the simulation results have a good consistency. Further, the key factors of the brake master cylinder for brake pedal feel are analyzed, and results show that the piston diameter, spring preload and stiffness, and the brake fluid gas content significantly influence the brake pedal feel and master cylinder performance.

Key words: vehicle engineering, brake master cylinder, hydraulic brake system, brake pedal feel, bulk modulus

CLC Number: 

  • U463.5
[1] Khan Y, Kulkarni P, Youceftoumi K. Modeling, experimentation and simulation of a brake apply system[J]. Journal of Dynamic Systems Measurement and Control, 1994, 116(1): 111-122.
[2] Gerdes J C, Hedrick J K. Brake system modeling for simulation and control[J]. Journal of Dynamic Systems Measurement and Control, 1999, 121(3): 496-503.
[3] 詹军. 基于ACC的制动系统模型研究[J]. 中国机械工程, 2005,16(5): 76-78. Zhan Jun. Research on model of brake system based on ACC system[J]. China Mechanical Engineering, 2005,16(5): 76-78.
[4] Fisher D K. Brake system component dynamic performance measurement and analysis[C]∥International Automobile Safety Conference,Detroit, Michigan, 1970.
[5] Yamada T, Sawada M. Development and implementation of simulation tool for vehicle brake system[C]∥SAE 2001 World Congress, Detroit, Michigan, 2001.
[6] 刘晓. 基于特性的制动系统动态建模与分析[D]. 长春:吉林大学汽车工程学院,2012. Liu Xiao. Dynamic modeling and analysis of the braking system based on its characteristics[D]. Changchun: College of Automotive Engineering, Jilin University, 2012.
[7] Fortina A, Velardocchia M, Sorniotti A. Braking system components modelling[C]∥21st Annual Brake Colloquium & Exhibition, Hollywood, Florida, 2003.
[8] 贺平. 基于Modelica的液压制动系统多领域建模与仿真[D]. 武汉:华中科技大学机械科学与工程学院,2011. He Ping. The multi-domain modeling and simulation of hydraulic brake system based on modelica[D]. Wuhan: School of Mechanical Science and Engineering, Huazhong University of Science & Technology, 2011.
[9] Day A, Ho H, Hussain K, et al. Brake system simulation to predict brake pedal feel in a passenger car[C]∥SAE 2009 Brake Colloquium and Exhibition, Tampa, Florida, 2009.
[10] 方泳龙,胥向欣,刘玺. 制动主缸与踏板行程专家系统知识库的建立[J]. 江苏大学学报:自然科学版, 2007,28(6): 477-481. Fang Yong-long, Xu Xiang-xin, Liu Xi. Expert system knowledge base construction of brakemaster cylinder stroke and brake pedal stroke[J]. Journal of Jiangsu University (Natural Science Edition), 2007,28(6): 477-481.
[11] 王兴东,胡于进,李成刚,等. 气液混合型制动系的执行机构建模试验和仿真[J]. 汽车工程, 2002,24(6): 516-519. Wang Xing-dong, Hu Yu-jin, Li Cheng-gang, et al. Modeling, experiment and simulation of a pneumatic-hydraulic brake system[J]. Automotive Engineering, 2002,24(6): 516-519.
[12] 朱冬. 液压系统低压管路瞬态过程研究[D]. 哈尔滨:哈尔滨工业大学机电工程学院,2006. Zhu Dong. The research of fluid transients in low pressure hydraulic pipeline[D]. Harbin: Mechatronic Engineering, Harbin Institute of Technology, 2006.
[13] 冯斌,龚国芳,杨华勇. 液压油弹性模量提高方法与试验[J].农业机械学报,2010,41(3):219-222. Feng Bin, Gong Guo-fang, Yang Hua-yong. Method and experiment for increasing effective fluid bulk modulus in hydraulic systems[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010,41(3):219-222.
[14] Goto Y, Yasuda A, Ishida S. Brake Master cylinder for secure brake feel and improved system failure performance[C]∥21st Annual Brake Colloquium & Exhibition, Hollywood, Florida, 2003.
[15] Rajesh A T, Badal B, Pol S. Co-relating subjective and objective brake performance: a case study[C]∥24th Annual Brake Colloquium and Exhibition, Grapevine, Texas, 2006.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel[J]. 吉林大学学报(工学版), 2018, 48(3): 828 -834 .
[2] QU Da-yi,YANG Jing-ru,BING Qi-chun,WANG Wu-lin,ZHOU Jing-chun. Arterial traffic offset optimization based on queue characteristics at adjacent intersections[J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1685 -1693 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd