吉林大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (1): 193-198.doi: 10.13229/j.cnki.jdxbgxb201601029

Previous Articles     Next Articles

Effect of starting microstructure on refining potency of electro-pulsing on reverse austenite grain

ZHANG Jia-tao, ZHAO Yu-guang, TAN Juan   

  1. College of Materials Science and Engineering, Jilin University, Changchun 130022, China
  • Received:2014-07-24 Online:2016-01-30 Published:2016-01-30

RICH HTML

0   

PDF (PC)

172

Abstract: The influence of starting microstructure on the austenite grain refining potency in Electro-Pulsing (EP) was investigated by microstructure observation and hardness testing. Results indicate that the mechanism of austenite formation from the starting tempered martensite during Electro-Pulsing Treatment (EPT) is occurred by the α + Fe3C → γ diffusional transformation, and austenite grains are ultra-refined (dγ < 5 μm). This verifies the analysis that the austenite nucleation rate can be increased by EPT. However, the reverse transformation from martensite during EPT occurs by the α'→ γ displacive transformation process. The prior austenite grain boundaries of the starting martensite are not changed during the reverse transformation, leading to the formation of coarse grained Displacive Reverse Austenite (DRA). Martensite transformed from DRA after quenching is strengthened. As the peak temperature is increased during EPT, the recrystallization of DRA is occurred. The nucleation recrystallization is started at the boundaries of DRA, where the high angle microstructure is only reversed after displacive reverse transformation. The mean size of the austenite grains is 11 μm after recrystallization.

Key words: metallic materials, reverse transformation, electropulsing treatment, grain refinement

CLC Number: 

  • TG161
[1] Cui H, Zong Y, Cang D, et al. Improving the solidification structure of commercially pure aluminium with electropulse acting on liquid metal[J]. Journal of University of Science and Technology Beijing, 2007, 14(4): 317-320.
[2] Zhou Y Z, Zeng Y, He G H, et al. The healing of quenched crack in 1045 steel under electropulsing[J]. Journal of Materials Research, 2001, 16(1): 17-19.
[3] Zhao Y G, Liang Y H, Zhou W, et al. Effect of a Current pulse on the thermal fatigue behavior of cast hot work die steel[J]. ISIJ International, 2005, 45(3): 410-412.
[4] Zhou Y, Xiao S, Guo J. Recrystallized microstructure in cold worked brass produced by electropulsing treatment[J]. Materials Letters, 2004, 58(12): 1948-1951.
[5] Zhou Y Z, Zhang W, Wang B Q, et al. Ultrafine-grained microstructure in a Cu-Zn alloy produced by electropulsing treatment[J]. Journal of Materials Research, 2003, 18(8): 1991-1997.
[6] Song H, Wang Z. Grain refinement by means of phase transformation and recrystallization induced by electropulsing[J]. Transactions of Nonferrous Metals Society of China, 2011,21(Sup.2): 353-357.
[7] Zhou Y Z, Guo J D, Zhang W, et al. Influence of electropulsing on nucleation during phase transformation[J]. Journal of Materials Research, 2002, 17(12): 3012-3014.
[8] Zhou Y Z, Zhang W, Wang B Q, et al. Grain refinement and formation of ultrafine-grained microstructure in a low-carbon steel under electropulsing[J]. Journal of Materials Research, 2002, 17(8): 2105-2111.
[9] Zhao Y, Ma B, Guo H, et al. Electropulsing strengthened 2 GPa boron steel with good ductility[J]. Materials and Design, 2013, 43: 195-199.
[10] Kasatkin O, Vinokur B, Pilyushenko V. Calculation models for determining the critical points of steel[J]. Metal Science and Heat Treatment, 1984, 26(1): 27-31.
[11] Apple C A, Krauss G. The effect of heating rate on the martensite to austenite transformation in Fe-Ni-C alloys[J]. Acta Metallurgica, 1972, 20(7): 849-856.
[12] Nakada N, Tsuchiyama T, Takaki S, et al. Transition from diffusive to displacive austenite reversion in low-alloy steel[J]. ISIJ International, 2013, 53(12): 2275-2277.
[13] Nakada N, Fukagawa R, Tsuchiyama T, et al. Inheritance of dislocations and crystallographic texture during martensitic reversion into austenite[J]. ISIJ International, 2013, 53(7): 1286-1288.
[14] Doherty R, Hughes D, Humphreys F, et al. Current issues in recrystallization: a review[J]. Materials Science and Engineering: A, 1997, 238(2): 219-274.
[15] Jiang Y, Tang G, Shek C, et al. Mechanism of electropulsing induced recrystallization in a cold-rolled Mg-9Al-1Zn alloy[J]. Journal of Alloys and Compounds, 2012,536: 94-105.
[1] ZHAO Yu-guang, YANG Xue-hui, XU Xiao-feng, ZHANG Yang-yang, NING Yu-heng. Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy [J]. 吉林大学学报(工学版), 2018, 48(1): 212-220.
[2] TANG Hua-guo, MA Xian-feng, ZHAO Wei, LIU Jian-wei, ZHAO Zhen-ye. Synthesis microstructure and thermal properties of high performance bulk Al [J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547.
[3] LIU Xiao-bo, ZHOU De-kun, ZHAO Yu-guang. Microstructure and mechanical property of Mg2Si/Al composites fabricated by semi-solid extrusion under different isothermal heat treatments [J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582.
[4] LI Chun-ling, FAN Ding, WANG Bin, YU Shu-rong. 5A06 aluminum alloy and galvanized steel butt welding-brazing by laser with preset filler powder [J]. 吉林大学学报(工学版), 2016, 46(2): 516-521.
[5] MA Yun-hai, SHANG Wen-bo, FAN Xue-ying, GAO Zhi-hui, TONG Jin, YAN Zhi-feng, CHANG Zhi-yong. Preparation and degradation of porous β-tricalcium phosphate bioceramic for bone imitaion [J]. 吉林大学学报(工学版), 2015, 45(4): 1367-1374.
[6] GUAN Qing-feng, LI Yan, HOU Xiu-li, YANG Sheng-zhi, WANG Xiao-tong. Modification of solid solution Mg-Gd-Y-Nd alloy irradiated by high current pulsed electron beam [J]. 吉林大学学报(工学版), 2015, 45(4): 1200-1205.
[7] GAO Song, LIANG Ji-cai, CHEN Guang-yi, WEI Zhi-yong, TENG Fei. Rapid adjusting of fundamental units in process of flexible 3D stretch-bending [J]. 吉林大学学报(工学版), 2014, 44(6): 1723-1728.
[8] HUANG Jian-kang, HE Cui-cui, SHI Yu, FAN Ding. Thermodynamic analysis of Al-Fe intermetallic compounds formed by dissimilar joining of aluminum and galvanized steel [J]. 吉林大学学报(工学版), 2014, 44(4): 1037-1041.
[9] GUAN Qing-feng,JI Le,CAI Jie,YANG Sheng-zhi,LIU Shi-chao,ZHANG Zai-qiang,HOU Xiu-li. Surface microstructure and properties of 3Cr13 martensitic stainless steel after high current pulsed electron beam bombardment [J]. 吉林大学学报(工学版), 2014, 44(3): 712-717.
[10] LI Xin,WANG Gang,LU Guan-han,GU Zheng-wei,XU Hong. Weldability of 22MnB5 after hot stamping by TIG welding processes [J]. 吉林大学学报(工学版), 2014, 44(3): 708-711.
[11] CHANG Ying, LI Ye, YING Liang, LU Jin-dong, TANG Xing-hui, GUO Wei. Effect of oxidation behavior on heat transfer dynamics performance of hot stamping steel [J]. 吉林大学学报(工学版), 2013, 43(06): 1551-1557.
[12] WANG Yun, LIU Cai, MA Li-dong, WANG Yu-feng, HUANG Qing-xue. Analysis of interval between guides during two-roll straightening process [J]. 吉林大学学报(工学版), 2013, 43(03): 677-681.
[13] WANG Su-fen, PENG Yan, LI Zhi-jie, XIAO Li-zi. Cold rolling mechanical characteristics of low carbon base plate produced by compact strip production [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 221-224.
[14] XU Hong, SHEN Yong-bo, GU Zheng-wei, MENG Jia, YU Si-bin, LI Xin. Test on hot stamping process of automotive ultra high strength steel beams [J]. 吉林大学学报(工学版), 2011, 41(增刊1): 111-114.
[15] YANG Yue, CHEN Bin. Effects of SiC nano-particles on microstructure and the corrosion resistance of micro-arc oxidation films produced on aluminium alloy [J]. 吉林大学学报(工学版), 2011, 41(增刊1): 106-110.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd