吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (3): 778-788.doi: 10.13229/j.cnki.jdxbgxb201703013

Previous Articles     Next Articles

Bending performance of glue-lumber beam reinforced by bamboo plyboard

GUO Nan1, ZHANG Ping-yang1, ZUO Yu2, ZUO Hong-liang1   

  1. 1.College of Civil Engineering, Northeast Forestry University, Harbin 150040, China;
    2.College of Architecture, Harbin Institute of Technology, Harbin 150006, China
  • Received:2016-12-28 Online:2017-05-20 Published:2017-05-20

Abstract: The bending performances of 21 bamboo plyboard enhanced glue-lumber beams were studied. Under the effects of bamboo plyboard layer number and thickness, the timber beam failure modes, ultimate load and mid-span deflection parameters were analyzed. Experimental results show that, compared to pure glue-lumber beams, the failure load of beams, with 1-3 layers of scuffing bamboo plyboard on the bottom, is increased by 16.8% ~ 45.9%. With the increase in the number of bamboo plyboard layers, the deformation capacity of the beams becomes stronger. However, the intercalated sliding becomes more obvious, which makes the bearing capacity of the beams decreases instead of increases. When the total thickness of the bamboo plyboard remains the same, the decrease in the thickness of each layer bamboo plyboard has no obvious influence on the failure modes of glue-lumber beam reinforced by bamboo plyboard. The total deformation is obvious and the ductility increases. The span-section strain of reinforced glue-lumber boards accords with the plane section assumption. The glue-lumber on the top of the beams reaches the compressive strength and has a certain plastic height when failure occurs. The scuffing-bamboo on the bottom of the beams reaches to the ultimate tensile strain. A formula to calculate the flexural capacity of the bamboo plyboard enhanced glue-lumber beams was put forward, which was verified. The optimum ratio of the thickness of the bamboo plyboard was given.

Key words: civil engineering, bamboo plyboard enhanced glue-lumber beam, bending performance, failure mode, bearing capacity calculation

CLC Number: 

  • TU366.3
[1] 杨会峰,刘伟庆. FRP增强胶合木梁的受弯性能研究[J]. 建筑结构学报,2007,28(1):64-71.
Yang Hui-feng, Liu Wei-qing. Study on flexural behavior of FRP reinforced glulam beams[J]. Journal of Building Structures,2007, 28(1):64-71.
[2] 淳庆,潘建伍,包兆鼎. 碳-芳混杂纤维布加固木梁抗弯性能试验研究[J]. 东南大学学报:自然科学版,2011, 41(1):168-173.
Chun Qing, Pan Jian-wu, Bao Zhao-ding. Experiments study on bending behavior of timber beams strengthened with CFRP/AFRP hybrid FRP sheet[J]. Journal of Southeast University(Natural Science Edition), 2011, 41(1):168-173.
[3] 王全凤,李飞,陈浩军,等. 玄武岩纤维布加固木梁抗弯性能的试验研究与有限元分析[J]. 工业建筑,2010,40(4):126-130.
Wang Quan-feng, Li Fei, Chen Hao-jun, et al. Experimental study on flexural behavior of timber beams reinforced with BFRP sheets[J]. Industrial Construction, 2010, 40(4):126-130.
[4] 谢启芳,赵鸿铁,薛建阳,等. 碳纤维布加固木梁抗弯性能的试验研究[J]. 工业建筑,2007,37(7):104-107.
Xie Qi-fang, Zhao Hong-tie, Xue Jian-yang, et al. Experimental study on behavior of timber beams strengthened with CFRP sheets[J]. Industrial Construction, 2007, 37(7):104-107.
[5] 杨昕卉,薛伟,郭楠.钢板增强胶合木梁的抗弯性能[J].吉林大学学报:工学版,2017,47(2):468-477.
Yang Xin-hui,Xue Wei,Guo Nan. Bending performance of glued-lumber beam reinforced with steel plate[J]. Journal of Jilin University(Engineering and Technology Edition),2017,47(2):468-477.
[6] 许清风,朱雷,陈建飞,等. 粘贴钢板加固木梁试验研究[J]. 中南大学学报:自然科学版,2012,43(3):1153-1159.
Xu Qing-feng, Zhu Lei, Chen Jian-fei, et al. Experiments study on behavior of timber beams strengthened with steel plates[J]. Journal of Central South University(Science and Technology),2012, 43(3):1153-1159.
[7] 许清风,朱雷,陈建飞,等. 内嵌CFRP筋/片加固木梁受弯性能试验研究[J]. 建筑结构学报,2012,33(8):149-156.
Xu Qing-feng, Zhu Lei, Chen Jian-fei, et al. Experiments study on flexural behavior of strengthening timber beams with near surface mounted CFRP bars and strips[J]. Journal of Building Structures, 2012, 33(8):149-156.
[8] Ribeiro Alfredo S, de Jesus Abílio M P, Lima António M,et al. Study of strengthening solutions for glued-laminated wood beams of maritime pine wood[J]. Construction and Building Materials,2009, 23(8):2738-2745.
[9] 左宏亮,卜大伟,郭楠,等. 玄武岩纤维复合材料对胶合木梁受弯性能的影响[J]. 东北林业大学学报,2015, 43(4):91-95.
Zuo Hong-liang, Bu Da-wei, Guo Nan, et al. Effect of basalt fiber composite on flexural behavior of glulam beams[J]. Journal of Northeast Forestry University, 2015, 43(4):91-95.
[10] Manalo A C, Aravinthan T, Karunasena W. Flexural behaviour of glue-laminated fibre composite sandwich beams[J]. Composite Structures,2010, 92(11):2703-2711.
[11] Huang Dong-sheng, Zhou Ai-ping, Bian Yu-ling. Experimental and analytical study on the nonlinear bending of parallel strand bamboo beams[J].Construction and Building Materials,2013,44:585-592.
[12] Mujiman, Henricus Priyosulistyo, Djoko Sulistyo,et al. Influence of shape and dimensions of lamina on shear and bending strength of vertically glue laminated bamboo beam[J]. Procedia Engineering,2014,95:22-30.
[13] Issa Camille A, Kmeid Ziad. Advanced wood engineering: glulam beams[J]. Original Research Article Construction and Building Materials,2005, 19(2):99-106.
[14] Toratti Tomi,Schnabl Simon, Turk Goran. Reliability analysis of a glulam beam[J]. Original Research Article Structural Safety,2007, 29(4):279-293.
[15] Joints with carbon fiber-reinforced polymer rods[J]. Journal of Composites for Construction,2005, 9(4):337-347.
[1] ZHENG Yi-feng, ZHAO Qun, BAO Wei, LI Zhuang, YU Xiao-fei. Wind resistance performance of long-span continuous rigid-frame bridge in cantilever construction stage [J]. 吉林大学学报(工学版), 2018, 48(2): 466-472.
[2] NI Ying-sheng, SUN Qi-xin, MA Ye, XU Dong. Calculation of capacity reinforcement about composite box girder with corrugated steel webs based on tensile stress region theory [J]. 吉林大学学报(工学版), 2018, 48(1): 148-158.
[3] WANG Teng, ZHOU Ming-ru, MA Lian-sheng, QIAO Hong-xia. Fracture grouting crack growth of collapsible loess based on fracture theory [J]. 吉林大学学报(工学版), 2017, 47(5): 1472-1481.
[4] ZHENG Yi-feng, MAO Jian, LIANG Shi-zhong, ZHENG Chuan-feng. Negative skin friction of pile foundation considering soil consolidation in high fill site [J]. 吉林大学学报(工学版), 2017, 47(4): 1075-1081.
[5] LI Jing, WANG Zhe. Mechanical characteristics of concrete under true triaxial loading condition [J]. 吉林大学学报(工学版), 2017, 47(3): 771-777.
[6] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
[7] ZHANG Jing, LIU Xiang-dong. Prediction of concrete strength based on least square support vector machine optimized by chaotic particle swarm optimization [J]. 吉林大学学报(工学版), 2016, 46(4): 1097-1102.
[8] GUO Xue-dong, MA Li-jun, ZHANG Yun-long. Analytical solution of the double joint layer composite beam with shear-slip under vertical concentrated load [J]. 吉林大学学报(工学版), 2016, 46(2): 432-438.
[9] HOU Zhong-ming, WANG Yuan-qing, XIA He, ZHANG Tian-shen. Simply-supported steel-concrete composite beams under moving load [J]. 吉林大学学报(工学版), 2015, 45(5): 1420-1427.
[10] SU Ying-she, YANG Yuan-yuan. Seismic compression performance of the concrete under high temperature [J]. 吉林大学学报(工学版), 2015, 45(5): 1436-1442.
[11] ZHANG Yan-ling, SUN Tong, HOU Zhong-ming, LI Yun-sheng. Bending-torsion characteristics of steel-concrete curved composite beams stiffened with diaphragms [J]. 吉林大学学报(工学版), 2015, 45(4): 1107-1114.
[12] WANG Chun-gang, ZHANG Zhuang-nan, ZHAO Da-qian, CAO Yu-fei. Experimental investigation of Σ-section channel steel with complex edge stiffeners and web holes under axial compression [J]. 吉林大学学报(工学版), 2015, 45(3): 788-796.
[13] LI Hai-feng,GUO Xiao-nong,LUO Yong-feng,GAO Xuan-neng. Collapse resistance behavior of Ferris wheel with stay cables [J]. 吉林大学学报(工学版), 2015, 45(2): 406-413.
[14] GUO Jun-ping, DENG Zong-cai, LU Hai-bo, LIN Jin-song. Experiment on shear behavior of reinforced concrete beams strengthened with prestressed high strength steel wire mesh [J]. 吉林大学学报(工学版), 2014, 44(4): 968-977.
[15] WANG Jia-chun, YAN Pei-yu. Probabilistic analysis of rebar rust in concrete under marine environment [J]. 吉林大学学报(工学版), 2014, 44(2): 352-357.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!