吉林大学学报(工学版) ›› 2018, Vol. 48 ›› Issue (4): 1298-1304.doi: 10.13229/j.cnki.jdxbgxb20170842

Previous Articles    

High-speed CMOS image sensor data acquisition system based on USB 3.0

DING Ning1, CHANG Yu-chun1, ZHAO Jian-bo1, WANG Chao2, YANG Xiao-tian2   

  1. 1.College of Electronic Science and Engineering, Jilin University, Changchun 130012,China;
    2.Jilin Provincial Key Laboratory of Architectural Electricity & Comprehensive Energy Saving, Jilin Jianzhu University, Changchun 130118, China;
  • Received:2017-07-20 Online:2018-07-01 Published:2018-07-01

Abstract: Due to the rapid improvement of the resolution and frame rate of the high-speed CMOS Image Sensor (CIS), image acquisition systems claim a higher level requirement for data bandwidth and cache capacity to dealing with the huge amount of real-time data from the sensor. According to this situation, this paper presents an implementation method for high-speed CIS data acquisition system based on FPGA and USB 3.0. The acquisition system is constructed by following parts: design of system hardware circuit, FPGA and UBS 3.0 software design, PC operation software design, system testing and debugging and measurement results. The results indicate that this system can use the maximum capacity of UBS 3.0, meanwhile, achieve zero Symbol Error Rate (SER) during the image reception process. Therefore, the system satisfies the requirement of real-time ability and accuracy of data for the current high-speed resolution CIS.

Key words: communication technology, CMOS image sensor, high-speed data acquisition, field-programmable gate array(FPGA), USB 3.0, LabVIEW

CLC Number: 

  • TN911.73
[1] 长春长光辰芯光电技术有限公司.CMOS图像传感器.[DB/OL].[2017-09-16].www.gpixelinc.com
[2] 宋中喆,裴东兴,杨少博.基于USB 3.0接口的高速数据传输系统设计[J].现代电子技术,2017(4):159-162.
Song Zhong-zhe, Pei Dong-xing, Yang Shao-bo.Design of high-speed data transmission system based on USB 3.0 interface[J]. Modern Electronics Technique,2017(4):159-162.
[3] 张恒, 马庆军. 紫外遥感仪器高速CMOS成像电子学系统[J].光学精密工程, 2018, 26(2): 471-479.
Zhang Heng, Ma Qing-jun.High speed CMOS imaging electronics system for ultraviolet remote sensing instrument[J]. Optics and Precision Engineering, 2018, 26(2): 471-479.
[4] 王征,何云丰,曹小涛,等. 基于FPGA的大面阵CMOS相机高速率电子学系统设计[J]. 液晶与显示,2016(2):173-178.
Wang Zheng, He Yun-feng, Cao Xiao-tao, et al.Design of large area array CMOS of high speed electronics camera system based on FPGA[J].Chinese Journal of Liquid Crystals and Displays, 2016(2):173-178.
[5] 岳孝忠,裴东兴,王健. 基于USB3.0接口高速数据采集系统的设计[J]. 电子器件,2015(1):140-143.
Yue Xiao-zhong, Pei Dong-xing, Wang Jian.The design of high-speed data acquisition system based on the USB3.0 interface[J].Chinese Journal of Electron Devices, 2015(1):140-143.
[6] 安平凹,尹达一. CMV2000高速大面阵信号处理和完整性仿真分析[J]. 应用科技,2015(3):1-6.
An Ping-ao, Yin Da-yi .CMV2000 high-speed large-array signal processing and integrity simulation analysis[J].Applied Science and Technology, 2015(3):1-6.
[7] 刘文彬,朱名日,郑丹平,等. 基于FPGA的大容量数据高速采集系统的设计[J]. 计算机测量与控制,2014(11):3751-3753.
Liu Wen-bin, Zhu Ming-ri, Zheng Dan-ping, et al.Design of large capacity and high speed acquisition system fordata based on FPGA[J].Computer Measurement & Control, 2014 (11):3751-3753.
[8] 刘烁. 基于FPGA的高速数据采集卡设计与实现[D].西安:西安电子科技大学电子工程学院,2014.
Liu Shuo.Design and implement of high speed data acquisition card based on FPGA[D]. Xi'an:School of Electronic Engineering, Xidian University, 2014.
[9] 徐海军, 叶卫东. FPGA在高性能数据采集系统中的应用[J]. 计测技术,2005, 25(1): 40-43.
Xu Hai-jun, Ye Wei-dong.FPGA application to high-performance data acquisition system[J]. Metrology & Measurement Technology, 2005,25(1):40-43.
[10] 马军. 高速高性能数据采集系统的实现方法[J]. 现代电子技术,2007, 30(9): 130-131.
Ma Jun.Application approach of high speed and high performance data acquisition system[J].Modern Electronics Technique, 2007, 30(9): 130-131.
[11] 袁宝红,付奎,张德祥. 基于FPGA和LabVIEW的USB数据采集与传输系统[J]. 仪表技术与传感器,2013(9):24-27.
Yuan Bao-hong, Fu Kui, Zhang De-xiang.USB data acquisition and transmission system based on FPGA and LabVIEW[J].Instrument Technique and Sensor, 2013(9):24-27.
[12] 杨威,黄建国,王志刚.DDR SDRAM在高速数据采集系统中的应用与设计[J].自动化信息,2006(8):43-45.
Yang Wei, Huang Juan-guo, Wang Zhi-gang.Application and design of DDR SDRAM to high speed data acquisition system[J].Automation Information,2006(8): 43-45.
[1] ZHOU Yan-guo,ZHANG Hai-lin,CHEN Rui-rui,ZHOU Tao. Two-level game approach based resource allocation scheme in cooperative networks [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1879-1886.
[2] SUN Xiao-ying, HU Ze-zheng, YANG Jin-peng. Assessment method of electromagnetic pulse sensitivity of vehicle engine system based on hierarchical Bayesian networks [J]. 吉林大学学报(工学版), 2018, 48(4): 1254-1264.
[3] DONG Ying, CUI Meng-yao, WU Hao, WANG Yu-hou. Clustering wireless rechargeable sensor networks charging schedule based on energy prediction [J]. 吉林大学学报(工学版), 2018, 48(4): 1265-1273.
[4] MOU Zong-lei, SONG Ping, ZHAI Ya-yu, CHEN Xiao-xiao. High accuracy measurement method for synchronous triggering pulse transmission delay in distributed test system [J]. 吉林大学学报(工学版), 2018, 48(4): 1274-1281.
[5] CHEN Ming, CHEN Jie, XIAO Jing-bo. Design of pipeline analog digital converter used for CMOS image sensors [J]. 吉林大学学报(工学版), 2018, 48(3): 968-976.
[6] CHEN Rui-rui, ZHANG Hai-lin. Performance analysis of 3D millimeter wave communications [J]. 吉林大学学报(工学版), 2018, 48(2): 605-609.
[7] ZHANG Chao-yi, LI Jin-hai, YAN Yue-peng. Improved Tong detection algorithm with double thresholds [J]. 吉林大学学报(工学版), 2018, 48(2): 610-617.
[8] GUAN Ji-shi, SHI Yao-wu, QIU Jian-wen, SHAN Ze-biao, SHI Hong-wei. New algorithm to estimate characteristic exponent of α-stable distribution [J]. 吉林大学学报(工学版), 2018, 48(2): 618-624.
[9] LI Wei, LI Ya-jie. Satisfactory integrated design between failure accommodation and communication for non-uniform transmission networked control system under discrete event-triggered communication scheme [J]. 吉林大学学报(工学版), 2018, 48(1): 245-258.
[10] SUN Xiao-ying, WANG Zhen, YANG Jin-peng, HU Ze-zheng, CHEN Jian. Electromagnetic susceptibility assessment of electronic throttle based on Bayesian network [J]. 吉林大学学报(工学版), 2018, 48(1): 281-289.
[11] WU Wei, WANG Shi-gang, ZHAO Yan, WEI Jian, ZHONG Cheng. Hexagonal elemental image array generation [J]. 吉林大学学报(工学版), 2018, 48(1): 290-294.
[12] YUAN Jian-guo, ZHANG Xi-ruo, QIU Piao-yu, WANG Yong, PANG Yu, LIN Jin-zhao. Non-iterative phase noise suppression algorithm utilizing cyclic prefix in OFDM systems [J]. 吉林大学学报(工学版), 2018, 48(1): 295-300.
[13] WANG Jin-peng, CAO Fan, HE Xiao-yang, ZOU Nian-yu. Multi carrier system joint receiving method based on MAI and ICI [J]. 吉林大学学报(工学版), 2018, 48(1): 301-305.
[14] YANG Cheng, SONG Ping, PENG Wen-jia, DENG Gao-shou, LIU Xiong-jun. Design of host computer platform for armored vehicle integrated test system [J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[15] SHI Wen-xiao, SUN Hao-ran, WANG Shao-bo. Joint channel allocation and routing algorithm in wireless mesh network [J]. 吉林大学学报(工学版), 2017, 47(6): 1918-1925.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .