吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (1): 181-186.doi: 10.13229/j.cnki.jdxbgxb201501027

• Orignal Article • Previous Articles     Next Articles

Butt-welding process of laser-MAG hybrid welding of 16 mm S355J2W+N steel plates

ZHEN Shu1,2,SUN Da-qian1,GAO Dan-dan1,DUAN Zhen-zhen2   

  1. 1.College of Materials Science and Engineering, Jilin University, Changchun 130022,China;
    2.Changchun Railway Vehicles Co., Ltd, Changchun 130062, China
  • Received:2013-09-16 Online:2015-02-01 Published:2015-02-01

RICH HTML

0   

PDF (PC)

341

Abstract: The effects of laser power and welding current on the appearance of weld, the microstructures and mechanical properties of welded joint were studied by CLSM, SEM, microhardness tester and universal tensile tester. The results show that laser power and welding current greatly promote the weld penetration. Laser power has no obvious influence on the weld width except that the weld is "bread twist" like when the laser power is relatively low. The multi-layer hybrid weld is goblet-shaped and there are a small amount of pores within the weld metal. The formation of the pores has nothing to do with the gasification of element Mn in the base metal and filler metal. Obvious necking emerges in the base metal zone where fracture happens during the tensile test. Furthermore, the fracture appearance has a typical characteristic of plastic deformation.

Key words: materials synthesis and processing technology, characteristics of welded joint, laserMAG hybrid welding, S355J2W+N, weld appearance

CLC Number: 

  • TG456.9
[1] 东涛, 刘嘉禾. 我国低合金钢及微合金钢的发展、问题和方向[J]. 钢铁, 2000, 35(11): 71-75.
Dong Tao, Liu Jia-he. Progress, problems and forecast of low alloy and microalloy steels in China[J]. Steel, 2000, 35(11): 71-75.
[2] 张励中, 刘博维, 张淘, 等. S355J2W+N耐候钢焊接接头显微组织与力学性能[J]. 北京交通大学学报,2012, 36(4): 127-134.
Zhang Li-zhong, Liu Bo-wei, Zhang Tao, et al. Microstructures and mechanical properties of the welded joints of S355J2W+N steel[J]. Journal of Beijing Jiaotong University, 2012, 36(4): 127-134.
[3] 杨德惠,宋全超. S355J2与S355J2W细晶粒钢焊接接头力学性能分析[J]. 焊接技术,2013, 42(3): 30-31.
Yang De-hui, Song Quan-chao. Study on mechanical properties of the welded joints of fine grain steel S355J2 and S355J2W[J]. Welding Technology, 2013,42(3): 30-31.
[4] Bagger C, Olsen F O. Review of laser hybrid welding[J]. J Laser Appl, 2005, 17: 2-14.
[5] Cao X, Wanjara P, Huang J, et al. Hybrid fiber laser-arc welding of thick section high strength low alloy steel[J]. Mater Des, 2011, 32: 3399-3413.
[6] Tusek J, Suban M. Hybrid welding with arc and laser beam[J]. Sci Technol Weld Joi, 1999, 4: 308-311.
[7] Yan Jun, Gao Ming, Zeng Xiao-yan. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding[J]. Opt Laser Eng, 2010, 48: 512-517.
[8] Gao Ming, Zeng Xiao-yan, Yan Jun, et al. Microstructure characteristics of laser-MIG hybrid welded mild steel[J]. Appl Surf Sci, 2008, 254: 5715-5721.
[9] Ribic B, Palmer T A, Deb Roy T. Problems and issues in laser-arc hybrid welding[J]. Int Mater Rev, 2009, 54(4): 223-244.
[10] Gao M, Zeng X Y, Hu Q W. Effects of gas shielding parameters on weld penetration of CO2 laser-TIG hybrid welding[J]. J Mater Process Tech, 2007, 184: 177-183.
[11] Guen E Le, Fabbro R, Carin M, et al. Analysis of hybrid Nd: YAG laser-MAG arc welding processes[J]. Opt Laser Technol, 2011, 43: 1155-1166.
[12] Uwe R, Simon O, Michael M, et al. Laser beam submerged arc hybrid welding[J]. Physics Procedia, 2011, 12: 179-187.
[1] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[2] HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530.
[3] QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[4] CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[7] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[10] GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[11] GU Zheng-wei, ZHANG Wen-xue, LYU Meng-meng, WANG Wei, XU Hong, LI Xin. Stretch bending defect control of U-section stainless steel profile with wide flange [J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[12] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[13] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
[14] LIANG Ji-cai, LI Yi, GAO Song, TENG Fei. Springback prediction for multi-point 3D stretch bending profile [J]. 吉林大学学报(工学版), 2017, 47(1): 185-190.
[15] XU Hong, LIU Ya-nan, YU Ting, GU Zheng-wei, LI Xiang-ji, ZHANG Zhi-qiang. Inelastic recovery behavior and microscopic mechanism of high strength DP780 steel during cyclic loading-unloading [J]. 吉林大学学报(工学版), 2017, 47(1): 191-198.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd