吉林大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (5): 1527-1533.doi: 10.13229/j.cnki.jdxbgxb201705026
Previous Articles Next Articles
LANG Li-hui, KAN Peng, WANG Yao, SUN Zhi-ying, ZHANG Quan-da
CLC Number:
| [1] 郎利辉,王永铭,谢亚苏,等. 铝合金不等高盒形件充液成形过程预胀形效应[J]. 中国有色金属学报, 2012, 22: 302-308. Lang Li-hui, Wang Yong-ming, Xie Ya-su, et al. Pre-bulging effect during sheet hydroforming process of aluminum alloy box with unequal height and flat bottom[J]. Transactions of Nonferrous Metals Society of China, 2012, 22: 302-308. [2] Gutscher G, Wu H C, Ngaile G, et al. Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test[J]. Journal of Materials Processing Technology, 2004, 146: 1-7. [3] 高铁军,陈鹏,王耀,等. 铝合金半球形件覆不锈钢粘性介质拉深成形及数值模拟[J]. 锻压技术, 2014, 39: 17-20. Gao Tie-jun,Chen Peng,Wang Yao,et al. Drawing and numerical simulation of hemispherical aluminum alloy part included viscous medium of stainless steel[J]. Forging & Stamping Technology, 2014, 39: 17-20. [4] Kobayashi M,Hayashi N, Kurosaki Y. Improvement of pure stretchability by overlapping sheet metals[J].塑性と加工, 2001, 42: 50-54. [5] Hill R. A theory of the plastic bulging of a metal diaphragm by lateral pressure[J]. Philos Mag, 1950, 41: 1133-1142. [6] Rees D. Plastic flow in the elliptical bulge test[J]. International Journal of Mechanical Sciences, 1995, 37: 373-389. [7] Banabic D, Balan T, Comsa D S. Closed-form solution for bulging through elliptical dies[J]. Journal of Materials Processing Technology, 2001, 115: 83-86. [8] Ragab A R, Habib O E. Determination of the equivalent stress versus equivalent strain rate behaviour of superplastic alloys in biaxial stress systems[J]. Materials Science & Engineering, 1984, 64: 5-14. [9] Lazarescu L, Comsa D S, Nicodim I, et al. Characterization of plastic behaviour of sheet metals by hydraulic bulge test[J]. Transactions of Nonferrous Metals Society of China, 2012, 22: 275-279. [10] Panknin W. The hydraulic bulge test and the determination of the flow stress curves[D]. Berlin: University of Stuttgart, 1959. [11] Spota J, Spisak E. Determination of flow stress by the hydraulic bulge test[J]. Metabk, 2008, 47: 13-17. [12] 杨希英,郎利辉,刘康宁,等. 基于韧性断裂准则的修正 MK模型及其在充液热成形中的应用[J]. 中国有色金属学报, 2015,23(10): 3389-3398. Yang Xi-ying, Lang Li-hui, Liu Kang-ning, et al. Modified MK model combined with ductile fracture criterion and its application in warm hydroforming[J]. Transactions of Nonferrous Metals Society of China, 2015,23(10): 3389-3398. [13] 高铁军,刘洋,陈鹏,等. 铝合金覆层板胀形过程及成形性能[J]. 中国有色金属学报, 2015, 25: 1050-1055. Gao Tie-jun, Liu Yang, Chen Peng, et al. Analysis of bulging process of aluminum alloy by overlapping sheet metal and its formability[J]. Transactions of Nonferrous Metals Society of China, 2015, 25: 1050-1055. [14] 李春峰,杨玉英. 椭圆凹模液压胀形法制作成形法极限图[J]. 材料科学与工艺, 1996(2): 101-105. Li Chun-feng,Yang Yu-ying. Forming limit diagram by elliptical die hydraulic bulge forming[J]. Material Science & Technology,1996(2):101-105. [15] Timoshenko S P, Krieger S W. Theory of Plates and Shells[M]. New York: McGraw-Hill,1959. |
| [1] | XIE Fang-xi, YAO Zhuo-tong, HU Xue-song, CAO Xiao-feng, JIA Gui-qi, HONG Wei. Influence of dynamic change of needle and hydraulic pressure in diesel injection nozzle on fuel spray characteristic [J]. 吉林大学学报(工学版), 2013, 43(04): 897-902. |
| [2] | FU Limin， FU Yuanfang. Numerical Simulation on Characteristics of Turbulent Flow [J]. 吉林大学学报(工学版), 2005, 35(04): 358-362. |
|