Journal of Jilin University(Engineering and Technology Edition) ›› 2019, Vol. 49 ›› Issue (6): 1945-1950.doi: 10.13229/j.cnki.jdxbgxb20180567

Previous Articles     Next Articles

Modified boiling heat transfer model considering roughness and material of heating surface

Xiao-yu HU(),Guo-xiang LI(),Shu-zhan BAI,Ke SUN,Si-yuan LI   

  1. School of Energy and Power Engineering, Shandong University, Jinan 250061, China
  • Received:2018-06-05 Online:2019-11-01 Published:2019-11-08
  • Contact: Guo-xiang LI E-mail:huxiaoyu@mail.sdu.edu.cn;liguox@sdu.edu.cn

RICH HTML

 3   

PDF (PC)

373

Abstract:

Nucleation boiling term of Chen model was modified by considering the influence of roughness and material of the heating surface. The modified model can effectively fit the experiment data of copper heating surface with roughness less than or equal to 4.62 μm and aluminum heating surface with roughness less than or equal to 8.12 μm, and the overall prediction error is within 30%.

Key words: power machinery and engineering, subcooled boiling heat transfer, surface roughness, Chen model

CLC Number: 

  • TK402

Fig.1

Comparison between Chen model andexperiment"

Fig.2

Correlation between surface roughnessand heat flux"

Fig.3

Correlated equation for predicting nucleation heat transfer from experimental data"

Fig.4

Comparison between modified model andexperiment with aluminum heating surface"

Fig.5

Comparison between modified Chen model and experiment with copper heating surface"

Fig.6

Comparison between predicted heat flux andexperiment heat flux"

1 林学东, 李德刚, 田维 . 高压喷射的高速直喷柴油机混合气形成及燃烧过程[J]. 吉林大学学报:工学版, 2009, 39(6): 1446-1451.
1 Lin Xue-dong , Li De-gang , Tian Wei . Air-fuel mixture formation and combustion process of a high-speed direct-injection diesel engine with high pressure injection[J]. Journal of Jilin University(Engineering and Technology Edition), 2009, 39(6): 1446-1451.
2 林学东, 顾静静, 李德刚, 等 . 柴油机燃烧室结构对混合气形成及燃烧特性的影响[J]. 吉林大学学报:工学版, 2014, 44(6): 1647-1654.
2 Lin Xue-dong , Gu Jing-jing , Li De-gang , et al . Effects of combustion chamber on the mixture formation and combustion characteristics of diesel engine[J]. Journal of Jilin University(Engineering and Technology Edition), 2014, 44(6): 1647-1654.
3 Guo B , Zhang W , Wang X . Failure analysis of a modern high performance diesel engine cylinder head[J]. Advances in Mechanical Engineering, 2014, 2014(8): 1-7.
4 Steiner H , Brenn G , Ramstorfer F , et al . Increased cooling power with nucleate boiling flow in automotive engine applications[C]∥New Trends and Developments in Automotive System Engineering，Italy，2011： 249-272.
5 Hosny Z , Abou Z . Forced convection and sub-cooled flow boiling heat transfer in asymmetrically heated ducts of T-section[J]. Energy Conversion and Management, 2004, 45(7/8): 1043-1065.
6 Robinson K , Campbell N A F , Hawley J G , et al . A review of precision engine cooling[C]∥SAE Paper, 1999-01-0578.
7 Finlay I C , Boyle R J , Pirault J P , et al . Nucleate and film boiling of engine coolants flowing in an uniformly heated duct of small cross section[C]∥SAE Paper, 870032.
8 Yu W , France D W , Singh D , et al . Subcooled flow boiling of ethylene glycol/water mixtures in a bottom-heated tube[J]. International Journal of Heat and Mass Transfer, 2014, 72(5): 637-645.
9 Robinson K , Hawley J G , Campell N A F . Experimental and modeling aspects of flow boiling heat transfer for application to internal combustion engines[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2003, 217(10): 877-889.
10 Steiner H , Breitsch?del B , Brenn G , et al . Nucleate boiling flow—Experimental investigations and wall heat transfer modeling for automotive engine applications[J/OL].[2018-05-28].https:∥.
11 Chen W , Fang X . A note on the Chen correlation of saturated flow boiling heat transfer[J]. International Journal of Refrigeration, 2014, 48: 100-104.
12 Setoodeh H , Keshavarz A , Ghasemian A , et al . Subcooled flow boiling of ethylene–glycol/water mixture in an inclined channel with a hot spot: an experimental study[J]. International Communications in Heat & Mass Transfer, 2016, 78: 285-294.
13 Chen J C . Correlation for boiling heat transfer to saturated fluids in convective flow[J]. Industrial & Engineering Chemistry Process Design and Development, 1966, 5(3): 322-329.
14 Dittus F W , Boelter L M K . Heat transfer in automobile radiator of the tubular type[J]. International Communications in Heat & Mass Transfer, 1985, 12(1): 3-22.
15 Forster H K , Zuber N . Dynamics of vapor bubbles and boiling heat transfer[J]. Aiche Journal, 1955, 1(4): 531-535.
16 Steiner H , Kobor A , Gebhard L . A wall heat transfer model for subcooled boiling flow[J]. International Journal of Heat & Mass Transfer, 2005, 48(19): 4161-4173.
17 Paz M C , Conde M , Suárez E , et al . On the effect of surface roughness and material on the subcooled flow boiling of water: experimental study and global correlation[J]. Experimental Thermal & Fluid Science, 2015, 64: 114-124.
18 Hua S , Huang R , Li Z , et al . Experimental study on the heat transfer characteristics of subcooled flow boiling with cast iron heating surface[J]. Applied Thermal Engineering, 2015, 77: 180-191.
19 Li Y Y , Chen Y J , Liu Z H . A uniform correlation for predicting pool boiling heat transfer on plane surface with surface characteristics effect[J]. International Journal of Heat & Mass Transfer, 2014, 77: 809-817.
20 Soleimani B , Keshavarz A . Heat transfer enhancement of an internal subcooled flow boiling over a hot spot[J]. Applied Thermal Engineering, 2016, 99: 206-213.
[1] Qiao WANG,Wan-chen SUN,Liang GUO,Peng CHENG,Lu-yan FAN,Guo-liang LI. Effects of butanol/diesel blends on combustion and particulate emission characteristics of compression ignition engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1920-1928.
[2] Chang-qing SONG,Wen-miao CHEN,Jun LI,Da-wei QU,Hao CUI. Effects of single and dual ignition on combustion characteristics of natural gas under different equivalence ratios [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1929-1935.
[3] Chang-cheng LIU,Zhong-chang LIU,Jing TIAN,Yun XU,Ze-yu YANG. In⁃cylinder exergy destruction during combustion process ofheavy⁃duty turbocharged diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1911-1919.
[4] Yi-xiao ZHU,Xiao-min HE,Yi JIN. Effects of radial strut width on flow structure ofsingle⁃cavity trapped vortex combustor [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1936-1944.
[5] De⁃jun WANG,Zhi⁃chao LYU,Qi⁃ming WANG,Jian⁃rui ZHANG,Jian⁃nan DING. Cylinder pressure identification based on EKF and frequency⁃amplitude modulation Fourier series [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(4): 1174-1185.
[6] Wu⁃jiao XU,Cheng⁃shang LIU,Xin⁃yao LU. Simulation and prediction of surface roughness of 6061 aluminum alloy workpiece after shot peening [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(4): 1280-1287.
[7] Peng⁃fei ZANG,Zhe WANG,Yang GAO,Chen⁃le SUN. Investigation of integrated control strategy for stable operation of linear generator/engine system [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(3): 798-804.
[8] Jin⁃zhong LU,Wan⁃ting ZHOU,Sheng⁃yang ZHANG,Yi⁃kai SHAO,Chang⁃yu WANG,Kai⁃yu LUO. Effect of coverage layer on corrosion resistance of 6061⁃T6 aluminum alloy subjected to laser shock peening [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(3): 842-849.
[9] JIANG Tao,LIN Xue-dong,LI De-gang,YANG Miao,TANG Xue-lin. Effect of control parameters on heat release rate with ANN method [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1747-1754.
[10] ZHAO Shuang,SHEN Ji-hong,ZHANG Liu,ZHAO Han,CHEN Ke-fan. Evaluation of surface roughness of micro electrical discharge machining based-on fast Gauss algorithm [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1838-1843.
[11] LI Zhi-jun, WANG Hao, HE Li, CAO Li-juan, ZHANG Yu-chi, ZHAO Xin-shun. Soot distribution features and its influence factors in catalytic diesel particulate filte [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1466-1474.
[12] QIN Jing, XU He, PEI Yi-qiang, ZUO Zi-nong, LU Li-li. Influence of initial temperature and initial pressure on premixed laminar burning characteristics of methane-dissociated methanol flames [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1475-1482.
[13] LIN Xue-dong, JIANG Tao, XU Tao, LI De-gang, GUO Liang. Control strategy of high pressure pump in starting condition of high pressure common rail diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1436-1443.
[14] ZHONG Bing, HONG Wei, JIN Zhao-hui, SU Yan, XIE Fang-xi, ZHANG Fu-wei. Movement characteristics of hydraulic variable valve train with early intake valve closing [J]. 吉林大学学报(工学版), 2018, 48(3): 727-734.
[15] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] Dai Wen-ting，Wei Hai-bin, Liu Han-bing, Gao Yi-ping . Dynamic damage model of silty clay after freeze-thaw cycles[J]. 吉林大学学报(工学版), 2007, 37(04): 790 -793 .
[2] Wang Rong-ben;Li Lin-hui;Guo Lie;Jin Li-sheng;Zhang Ming-heng . Stereo vision based crosscountry environmental perception technique[J]. 吉林大学学报(工学版), 2008, 38(03): 520 -0524 .
[3] Zhang Wen-bin，Zhang Zhong-zhao，Wang Xiao . New timing scheme for increasing TCP throughput in ad hoc network[J]. 吉林大学学报(工学版), 2008, 38(01): 233 -238 .
[4] Guo Kong-hui;Wang Shuang;Ding Hai-tao;Zhang Jian-wei . Elastic coupling characteristic of unsymmetrical rubber bushings of rear suspension[J]. 吉林大学学报(工学版), 2007, 37(06): 1225 -1228 .
[5] Yang Gong-ping, Zeng Guang-zhou . Migrating workflow organization and execution based on navigation model[J]. 吉林大学学报(工学版), 2006, 36(05): 819 -0823 .
[6] Li Shao-hua，Huang Hui，Guo Ting-ting，Pu Jian-ye. Numerical simulations of particle trajectory in turbulent jettocross flow[J]. 吉林大学学报(工学版), 2006, 36(06): 1029 -1033 .
[7] Chen Yong-heng, Ge Xing, Wang Dian-hai. Analysis on speed-flow characteristics at typical sections in urban arteries[J]. 吉林大学学报(工学版), 2006, 36(04): 613 -617 .
[8] Variable structure control of flexible manipulator based on distributed parameter model . Variable structure control of flexible manipulator based on distributed parameter model[J]. 吉林大学学报(工学版), 2008, 38(04): 924 -929 .
[9] Zhao Ji，Chen De-xiang, Zhang Fu, Zhan Jian-ming，Zhang En-zhong. Technique of super smooth surface processing by SiC suspension liquid[J]. 吉林大学学报(工学版), 2006, 36(04): 518 -522 .
[10] Tian Li-mei;Ren Lu-quan;Liu Qing-ping;Zhao Guo-ru . Numerical simulation on drag reduction characteristic around bodies
of revolution with bionic nonsmooth surface[J]. 吉林大学学报(工学版), 2006, 36(06): 908 -0913 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd