Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (4): 1190-1197.doi: 10.13229/j.cnki.jdxbgxb20200503

Previous Articles    

Equivalent modeling of tensile-shear behavior for friction stir spot welding joints

Xin CHEN(),Gui-shen YU,Biao ZHANG,Kai-xuan PAN,Li-fei YANG   

  1. State Key Laboratory of Automotive Simulation and Control，Jilin University，Changchun 130022，China
  • Received:2020-07-04 Online:2021-07-01 Published:2021-07-14

RICH HTML

 6   

PDF (PC)

182

Abstract:

In this paper, an equivalent modeling method of the cohesive zone weld model (CZWM) is proposed for the simulation of the most dominant tensile-shear loads in automotive body welds. Based on the measurement results of the initial damage and fracture energy from single spot weld joints through tensile-shear and multi-angle tension, an equivalent model of the joint is established. The model is in good agreement with the experimental results of the single spot weld joint in tensile-shear process. At the same time, the effectiveness of the CZWM is verified by three kinds of double weld joints. The results show that the maximum deviation of CZWM in tensile-shear failure load (TSFL) and failure displacement (FD) is 9.3% and 7.1% respectively. When the distribution of welds is parallel to the direction of the external load, the bearing capacity is the highest, the vertical is the lowest, and the diagonal is in the middle. This model provides an option for the numerical simulation of the mechanical behavior in automotive body FSSW welds.

Key words: vehicle engineering, friction stir spot welding, cohesive zone weld model, tensile-shear behavior, failure load, welds distribution

CLC Number: 

  • U41

Fig.1

Cohesion zone model at crack tip"

Fig.2

Traction-displacement and stress-displacement models of CZM"

Fig.3

Dimensions of test specimen"

Fig.4

FSSW gantry system and physical images of used welding tool"

Fig.5

Multi-axial tensile strength tests"

Fig.6

Stress components in axial and tangential directions of tensile-shear and multi-angle tensile strength in SSW joints and their fitting curve"

Fig.7

Load and boundary conditions of SSW joint （t1=t2=2 mm， L=180 mm， W=c=40 mm）"

Fig.8

Loading FEM model of SSW joint in CZWM"

Fig.9

Distribution of CSDMG function in overlap area during stretching"

Fig.10

Load-displacement curves for experimental and numerical simulation of SSW joints"

Fig.11

Schematic diagram of the structure and size of three types of dual spot weld joints"

Fig.12

Experimental displacement-load curves for four types of joints （SSW， SDSW， PDSW and DDSW）"

Fig.13

FEM of three types of double-spot joint"

Fig.14

Numerical simulation results of load-displacement for four types of joints and comparison of numerical simulation and experimental results on TSFL and FD"

1 Shen Z, Ding Y, Gerlich A P. Advances in friction stir spot welding[J]. Critical Reviews in Solid State and Materials Sciences, 2020,45(6):457-534.
2 Kayode O, Akinlabi E T. An overview on joining of aluminium and magnesium alloys using friction stir welding (FSW) for automotive lightweight applications[J]. Materials Research Express, 2019, 6(11):190.
3 Ma Z Y, Feng A H, Chen D, et al. Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties[J]. Critical Reviews in Solid State and Materials Sciences, 2018, 43(4): 269-333.
4 Ojo O O, Taban E, Kaluc E. Friction stir spot welding of aluminum alloys: a recent review[J]. Materials Testing, 2015, 57(7/8): 609-627.
5 Bagheri B, Abbasi M, Givi M. Effects of vibration on microstructure and thermal properties of friction stir spot welded (FSSW) aluminum alloy (Al5083)[J]. International Journal of Precision Engineering and Manufacturing, 2019, 20(7): 1219-1227.
6 Bagheri B, Rizi A A M, Abbasi M, et al. Friction stir spot vibration welding: improving the microstructure and mechanical properties of Al5083 joint[J]. Metallography Microstructure and Analysis, 2019, 8(5): 713-725.
7 Lacki P, Adamus K, Winowiecka J. The numerical simulation of aviation structure joined by FSW[J]. Archives of Metallurgy and Materials, 2019, 64(1): 387-392.
8 Chu Q, Yang X, Li W, et al. Numerical analysis of material flow in the probeless friction stir spot welding based on coupled Eulerian-Lagrangian approach[J]. Journal of Manufacturing Processes, 2018, 36: 181-187.
9 Eskandari M, Aval H J, Jamaati R. The study of thermomechanical and microstructural issues in dissimilar FSW of AA6061 wrought and A390 cast alloys[J]. Journal of Manufacturing Processes, 2019, 41: 168-176.
10 Li Z, Yue Y, Ji S, et al. Optimal design of thread geometry and its performance in friction stir spot welding[J]. Materials & Design, 2016, 94: 368-376.
11 Zhang B, Chen X, Pan K, et al. Thermo-mechanical simulation using microstructure-based modeling of friction stir spot welded AA6061-T6[J]. Journal of Manufacturing Processes, 2019, 37: 71-81.
12 Park K, Choi H, Paulino G H. Assessment of cohesive traction-separation relationships in ABAQUS: a comparative study[J]. Mechanics Research Communications, 2016, 78(B): 71-78.
13 Silva L D, Rodrigues T, Figueiredo M, et al. Effect of adhesive type and thickness on the lap shear strength[J]. The Journal of Adhesion, 2006, 82(11): 1091-1115.
14 Sadigh M. Enhanced failure load bearing in adhesively bonded strap repairs: numerical analysis and experimental results[J]. Journal of Failure Analysis and Prevention, 2019, 19(1): 182-192.
15 Bozzi S, Helbert-Etter A L, Baudin T, et al. Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds[J]. Journal of Materials Processing Technology, 2010, 210(11): 1429-1435.
16 Garg A, Bhattacharya A. On lap shear strength of friction stir spot welded AA6061 alloy[J]. Journal of Manufacturing Processes, 2017, 26: 203-215.
17 马轶男, 陶汪, 陈彦宾, 等. 焊点排布方式对激光点焊-胶接复合接头断裂过程的影响[J]. 中国激光, 2013, 40(10):83-90.
Ma Yi-nan, Tao Wang, Chen Yan-bin, et al. Influence of spot arrangements on laser spot weld bonded joint fracture process[J]. China Laser, 2013, 40(10): 83-90.
18 马轶男. 激光点焊-胶接复合连接特性及接头断裂机制研究[D]. 哈尔滨: 哈尔滨工业大学先进焊接与连接国家重点实验室, 2015.
Ma Yi-nan. Laser spot welding-glue composite connection characteristics and joint fracture mechanism research[D]. Harbin: Advanced Welding and Connection of the National Key Laboratory,Harbin University of Technology,2015.
[1] Da-feng SONG,Li-li YANG,Xiao-hua ZENG,Xing-qi WANG,Wei-zhi LIANG,Nan-nan YANG. Battery life optimization of hybrid electric vehicle based on driving cycle construction [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 781-791.
[2] Jia-xu ZHANG,Xin-zhi WANG,Jian ZHAO,Zheng-tang SHI. Path planning and discrete sliding mode tracking control for high⁃speed lane changing collision avoidance of vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 1081-1090.
[3] Ren HE,Xiao-cong ZHAO,Yi-bin YANG,Jian-qiang WANG. Man⁃machine shared driving model using risk⁃response mechanism of human driver [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 799-809.
[4] Qiang SONG,Dan-ting SUN,Wei ZHANG. Shift nonlinear modeling and control of automated mechanical transmission in pure electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 810-819.
[5] Bo WANG,Yang-yang HE,Bing-bing NIE,Shu-cai XU,Jin-huan ZHANG. Abdominal injury of vehicle occupant in underbody blast events [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 792-798.
[6] Wei-min ZHUANG,Peng-yue WANG,Rui-juan GAO,Dong-xuan XIE. Effect of hot forming on static mechanical properties of AA5754 aluminum alloy [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 847-854.
[7] Shou-tao LI,Rui WANG,Jing-chun XU,De-jun WANG,Yan-tao TIAN,Ding-li YU. A vehicle collision avoidance control method based on model predictive composite control [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 738-746.
[8] Wei-da WANG,Yan-jie WU,Jia-lei SHI,Liang LI. Electronic hydraulic brake power system control strategy based on driver intention recognition [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 406-413.
[9] Guo-ying CHEN,Jun YAO,Peng WANG,Qi-kun XIA. Stability control strategy for rear in⁃wheel motor drive vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(2): 397-405.
[10] Fang-wu MA,Hong-yu LIANG,Qiang WANG,Yong-feng PU. In-plane dynamic crushing of dual-material structure with negative Poisson′s ratio [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 114-121.
[11] Dao WU,Li-bin ZHANG,Yun-xiang ZHANG,Hong-ying SHAN,Hong-mei SHAN. Visual detection method for vehicle braking time sequence based on slip rate identification [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 206-216.
[12] En-hui ZHANG,Ren HE,Wei-dong SU. Numerical analysis of oil liquid sloshing characteristics in fuel tank with different baffle structures [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 83-95.
[13] Lu XIONG,Yan-chao WEI,Le-tian GAO. Inertial measurement unit/wheel speed sensor integrated zero-speed detection [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 134-138.
[14] Ji-qing CHEN,Qing-sheng LAN,Feng-chong LAN,Zhao-lin LIU. Trajectory tracking control based on tire force prediction and fitting [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1565-1573.
[15] Zhi-gang YANG,Ya-jun FAN,Chao XIA,Shi-jun CHU,Xi-zhuang SHAN. Drag reduction of a square⁃back Ahmed model based on bi⁃stable wake [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(5): 1635-1644.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd