Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (3): 533-540.doi: 10.13229/j.cnki.jdxbgxb20210334

Previous Articles    

RP⁃3 jet fuel lubricity and improvement measurements

Tong-bin ZHAO1(),Yi-sheng WU2,Yao-zong DUAN1,Zhen HUANG1,Dong HAN1,2()   

  1. 1.Key Laboratory for Power Machinery and Engineering,Ministry of Education,Shanghai Jiao Tong University,Shanghai 200240,China
    2.China-UK Low Carbon College,Shanghai Jiao Tong University,Shanghai 201306,China
  • Received:2021-04-15 Online:2022-03-01 Published:2022-03-08
  • Contact: Dong HAN E-mail:zhaotongbin@sjtu.edu.cn;dong_han@sjtu.edu.cn

Abstract:

The effects of fuel temperature, working load and wearing time on the lubrication performance of RP-3 jet fuel were studied on a high-frequency reciprocating rig. Further, different lubricity additives were used to improve the lubrication performance of RP-3 jet fuel. It is revealed that RP-3 jet fuel produces larger wear scar diameter than diesel fuel, and increasing working load and wearing time elevate the wear scar diameter. Increasing fuel temperature slightly reduces wear scar diameter, possibly because of the increased generation of anti-wearing products. Lubricity additives can dramatically enhance RP-3 jet fuel lubrication performance, but the improvement effects are not monotonic with the addition fraction. As the addition fraction exceeds a certain value, the lubrication performance of RP-3 jet fuel does not obviously change with further addition of lubricity additives.

Key words: energy and power engineering, RP-3 jet fuel, diesel, lubricity, lubricity additives

CLC Number: 

  • TK427

Table 1

Physical and chemical properties oftwo test fuels and biodiesel"

理化参数柴油RP-3航空煤油

生物

柴油

运动黏度/(mm2·s-1)@40 oC2.481.28(20 oC)4.70
密度/(g·ml-1)@40 oC0.830.780.88
表面张力/(10-3 N·m-1)@20 oC27.5023.60-
含硫量/%0.500.30<0.01

Table 2

Experimental parameters underSH/T 0765—2005 standard"

参数数值
冲程/mm1.0
频率/Hz50
液体温度/℃60
应用载荷/g200
试验时间/min75

Fig.1

Comparison of the mean wear scar diameterof RP-3 jet fuel and commercial dieselunder different test conditions"

Fig.2

Comparison of the oil film thickness of RP-3 jet fuel and diesel under the standard condition"

Fig.3

Comparison of oil film thickness of RP-3jet fuel under different conditions"

Fig.4

Mean wear scar diameter of RP-3 jet fuelwith and without lubrication improver"

Fig.5

Oil film thickness development of RP-3 jet fuel with different lubrication improver"

1 Lacey P I, Lestz S J. Effect of low-lubricity fuels on diesel injection pumps-part I: field performance[C]∥SAE Technical Paper, 920823.
2 Lacey P I, Lestz S J. Effect of low-lubricity fuels on diesel injection pumps-part Ⅱ: laborator evaluation[C]∥SAE Technical Paper, 920824.
3 Salvi A A, Assanis D, Filipi Z. Impact of physical and chemical properties of alternative fuels on combustion, gaseous emissions, and particulate matter during steady and transient engine operation[J]. Energy and Fuels, 2012, 26(7): 4231-4241.
4 Appeldoorn J K, Dukek W G. Lubricity of jet fuels[J]. SAE Transactions, 1967, 75(3): 428-440.
5 Anastopoulos G, Lois E, Zannikos F, et al. HFRR lubricity response of an additized aviation kerosene for use in CI engines[J]. Tribology International, 2002, 35(9): 599-604.
6 Wei D, Spikes H A. The lubricity of diesel fuels[J]. Wear, 1986, 111(2): 217-235.
7 梅德清,罗演强,沈学峰. 脂肪酸甲酯生物柴油改善低硫柴油的润滑性能[J]. 农业工程学报,2016,32(9): 193-197.
Mei De-qing, Luo Yan-qiang, Shen Xue-feng. Improvement of fatty acid methyl ester biodiesel on low sulfur diesel lubricity[J]. Journal of Agricultural Engineering, 2016, 32(9): 193-197.
8 Munoz M, Moreno F, Monne C, et al. Biodiesel improves lubricity of new low sulphur diesel fuels[J]. Renewable Energy, 2011, 36(11): 2918-2924.
9 Johnson D W, Flake M, Adams R. Determination of corrosion inhibitor-lubricity improver in jet fuels by liquid chromatography-electrospray ionization mass spectrometry[J]. Current Trends in Mass Spectrometry, 2014, 32(12): 22-25.
10 Korres D M, Karonis D, Lois E, et al. Aviation fuel JP-5 and biodiesel on a diesel engine[J]. Fuel, 2008, 87(1): 70-78.
11 Vere R A. Lubricity of aviation turbine-fuels[J]. SAE Transactions, 1969, 78(4): 2237-2245.
12 Duan Y Z, Liu W, Huang Z, et al. An experimental study on spray auto-ignition of RP-3 jet fuel and its surrogates[J]. Frontiers in Energy, 2021, 15(2): 396-404.
13 姚广涛,刘宏威,杨春浩,等. 军用车辆柴油机燃用航空煤油性能研究[J]. 内燃机工程, 2017, 38(1): 76-80.
Yao Guang-tao, Liu Hong-wei, Yang Chun-hao, et al. Study on the performance of military vehicle diesel engine fueled with jet fuel[J]. Internal Combustion Engine Engineering, 2017, 38(1): 76-80.
14 杜巍,张乾坤,侯金赤,等. 不同喷油压力RP-3航空煤油、柴油碰壁喷雾着火和燃烧特性的对比研究[J]. 内燃机工程, 2019, 40(5): 30-37.
Du Wei, Zhang Qian-kun, Hou Jin-chi, et al. Comparative study on the ignition and combustion characteristics of RP-3 jet fuel and diesel collision spray at different injection pressures[J]. Internal Combustion Engine Engineering, 2019, 40(5): 30-37.
15 张强强,吴凯,彭玉斌,等. 高等级发动机润滑油润滑特性分析[J]. 润滑与密封, 2018, 43(4): 38-41.
Zhang Qiang-qiang, Wu Kai, Peng Yu-bin, et al. Analysis of lubricity of high-grade engine lubricants[J]. Lubrication and Sealing, 2018, 43(4): 38-41.
16 . 柴油润滑性评定法(高频往复试验机法) [S].
17 . Testing of lubricants-tribological test in the translatory oscillation apparatus-part 1: general working principles [S].
18 Hong F T, Alghamdi N M, Bailey A S, et al. Chemical and kinetic insights into fuel lubricity loss of low-sulfur diesel upon the addition of multiple oxygenated compounds[J]. Tribology International, 2020, 152: No. 106559.
19 . 车用柴油 [S].
20 Hermance H W, Egan T F. Organic deposits on precious metal contacts[J]. The Bell System Technical Journal, 1958, 37(3): 739-776.
21 Furey M J. Metallic contact and friction between sliding surfaces[J]. ASLE Transactions, 2008, 4(1): 1-11.
22 Ma Z, Henein N A, Bryzik W. A model for wear and friction in cylinder liners and piston rings[J]. Tribology Transactions, 2006, 49(3): 315-327.
23 Matusova T N, Loginov S A, Polina E V, et al. Improvement of the lubricating properties of diesel fuels [J]. Chemistry and Technology of Fuels and Oils, 2002, 38(3): 167-170.
24 Jacobs T D B, Gotsmann B, Lantz M A, et al. On the application of transition state theory to atomic-scale wear[J]. Tribology Letters, 2010, 39(3): 257-271.
25 Wang J C, Cusano C M. Predicting lubricity of low sulfur diesel fuel[C]∥SAE Technical Paper, 952564.
26 Hsu S M, Gates R S. Boundary lubricating films: formation and lubrication mechanism[J]. Tribology International, 2005, 38(3): 305-312.
27 Canoira L, Galeán J G, Alcántara R, et al. Fatty acid methyl esters (FAMEs) from castor oil: Production process assessment and synergistic effects in its properties[J]. Renewable Energy, 2010, 35(1): 208-217.
28 常秋英, 杨沛然, 张朝辉. 机油黏度对凸轮挺柱摩擦副润滑性能的影响[J]. 内燃机学报, 2010, 28(4): 380-383.
Chang Qiu-ying, Yang Pei-ran, Zhang Chao-hui. The effect of oil viscosity on the lubricity of cam tappet friction pair[J]. Journal of Internal Combustion Engine, 2010, 28(4): 380-383.
29 李延骁, 左正兴, 冯慧华. 自由活塞发动机活塞环-气缸套的润滑及摩擦特性[J]. 内燃机学报, 2018, 36(4): 353-359.
Li Yan-xiao, Zuo Zheng-xing, Feng Hui-hua. Lubrication and friction characteristics of piston ring-cylinder liner of free piston engine[J]. Journal of Internal Combustion Engine, 2018, 36(4): 353-359.
30 He X, Kim S H. Mechanochemistry of physisorbed molecules at tribological interfaces: molecular structure dependence of tribochemical polymerization[J]. Langmuir, 2017, 33(11): 2717-2724.
31 Anastopoulos G, Lois E, Zannikos F, et al. Influence of aceto acetic esters and di-carboxylic acid esters on diesel fuel lubricity[J]. Tribology International, 2001, 34(11): 749-755.
32 Hsu S M, Gates R S. Boundary lubrication and boundary lubricating film[J]. Tribology Series, 1993, 25: 331-346.
[1] Yan ZHANG,Wei LIU,Shu-yong ZHANG,Yi-qiang PEI,Meng-meng DONG,Jing QIN. Optimization on thermal load of combustion chamber on two/four⁃stroke switchable diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(3): 504-514.
[2] Wen-zhi GAO,Yan-jun WANG,Xin-wei WANG,Pan ZHANG,Yong LI,Yang DONG. Real⁃time diagnosis for misfire fault of diesel engine based on convolutional neural network [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(2): 417-424.
[3] Zhong WANG,You LI,Mei-juan ZHANG,Shuai LIU,Rui-na LI,Huai-bei ZHAO. Analysis on particle collision dynamics parameters in diesel exhaust stage [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 39-48.
[4] Yun-feng HU,Yi-tong DING,Zhi-xin ZHAO,Bing-jing JIANG,Jin-wu GAO. Data-driven modeling and receding optimization control of diesel engine combustion process [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(1): 49-62.
[5] Jian WANG,Xin XU,Han GU,Duo-jun ZHANG,Sheng-ji LIU. Heating characteristics of DOC based on exhaust thermal management of diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2020, 50(2): 408-416.
[6] Qiao WANG,Wan-chen SUN,Liang GUO,Peng CHENG,Lu-yan FAN,Guo-liang LI. Effects of butanol/diesel blends on combustion and particulate emission characteristics of compression ignition engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1920-1928.
[7] Chang-cheng LIU,Zhong-chang LIU,Jing TIAN,Yun XU,Ze-yu YANG. In⁃cylinder exergy destruction during combustion process ofheavy⁃duty turbocharged diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(6): 1911-1919.
[8] Xiang⁃huan ZU,Chuan⁃lei YANG,He⁃chun WANG,Yin⁃yan WANG. Exhaust gas recirculation performance evaluation of marine diesel engine and its application [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(3): 805-815.
[9] YANG Shuai, FENG Zhi-wei, ZHAO Zhi-guo, ZHOU Yi. 1-Dimensional simulation analysis about the influence of different Miller cycle strategies on diesel engine operating process [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1444-1454.
[10] LIN Xue-dong, JIANG Tao, XU Tao, LI De-gang, GUO Liang. Control strategy of high pressure pump in starting condition of high pressure common rail diesel engine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1436-1443.
[11] LI Zhi-jun, WANG Hao, HE Li, CAO Li-juan, ZHANG Yu-chi, ZHAO Xin-shun. Soot distribution features and its influence factors in catalytic diesel particulate filte [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1466-1474.
[12] GONG Xun, JIANG Bing-jing, HU Yun-feng, QU Ting, CHEN Hong. Design and analysis of nonlinear state observer for master-slave two cell Urea-SCR system of diesel engine [J]. 吉林大学学报(工学版), 2018, 48(4): 1055-1062.
[13] TIAN Jing, LIU Zhong-chang, LIU Jin-shan, DONG Chun-xiao, ZHONG Ming, DU Wen-chang. Performance optimization of diesel engine based on response surface methodology of multi-boundary combustion conditions [J]. 吉林大学学报(工学版), 2018, 48(1): 159-165.
[14] GUO Liang, YANG Wen-zhao, WANG Yun-kai, SUN Wan-chen, CHENG Peng, LI Guo-liang. Effect of exhaust gas recirculation on internal combustion engine fueled with butanol/diesel blend [J]. 吉林大学学报(工学版), 2017, 47(6): 1767-1774.
[15] LIU Zhong-chang, TENG Peng-kun, TIAN Jing, XU Yun, QI Sheng-lin, YU Kai-bo. Regulation characteristics of bypass valve of two stage turbocharged diesel engine [J]. 吉林大学学报(工学版), 2017, 47(3): 796-803.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!